Can it be done like you can with Text etc?
i know it can be done via lineweights, but you cant "lock" the lineweight in model space,
at the mo, to generate a thinkness in a line i use the global width for that pline.
i dont want to use line weights as i sometimes have multiple lines with different widths on the same layer, i could split the layers, but i'd rather not to.
whats the difference between creating a width using layers and using polyline width?
View 2 Replies View RelatedI am trying to learn Annotative text using multiple viewports. My question: I have text in Model space with Annotative scales to match two different viewports in layout space. Sometimes the text or dimensions for that matter appears in a different place in the two windows. What gives?
View 7 Replies View RelatedAfter drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
Im trying to keep annotative blocks in the same spot on different scale viewports. The main issue Im having is, when i have a lets say house plan in viewport #1 and have all my blocks in place that I moved copyed from my template. When I open another viewport at a diffrent scale the blocks move. Im useing a large number of blocks for electrical symbols we use at work that I need to be in every viewport so we can copy them and place them where needed on the plan.
View 3 Replies View RelatedI have annotative mtext that keeps changing width and location. See pic. When gripped, they're in the correct location but wrong scale. I experienced this on a few drawings with C3d 2010 and now 2011.
View 7 Replies View RelatedI've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
In our office cutlines are made up of polylines. When I use this in an annotative drawing I cannot get the polyline to change with the scale factor. Is there a way to make the polyline annotative?
View 4 Replies View RelatedI'm drawing a polyline with a width of 5". In previous versions, the pline would always appear solid. Now it appears clear. I want it to appear solid. If this is editable in the pline properties, or if it's something you turn on after you pick the first point, much like typing 'W' to enter the width?
View 4 Replies View Relatedi have a set of coordinates, not on the polyline. i want to find the polyline width where that coodinate intersects perpendicular to the polyline (shortest distance). without going through all the vertices.
i have a polyline with many segments with varying width, which are constant through the each segments (no taper width). need to read off the "instantaneous" width.
just 2dpoly or lwpoly not 3d.
i found this
[URL]........
Not quite what i want.
I am trying to create a block that contains polylines. these polylines need to be able to have the width of them set individually.
What parameter do i need to assign so that this can happen?
I am having a problem with trying to come up with a way to create an inventor entity that is like an an autocad multi-width polyline. We make some of our lines in our silk screen as multi-width polylines - see example fig 1. I can't figure out how to accomplish this type of line effect in inventor - see example fig 2. We are actively trying to move from MDT2009 to Inventor and i can recreate most everything except this multi-width polyline.-
View 2 Replies View RelatedI have a polyline that has been inserted into a block. I want to scale the block so that the start and end points of the polyline can change but the width of the polyline remains constant.
View 2 Replies View RelatedI have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
View 4 Replies View RelatedI know you can change the width of the polyline by using the command "plinewid". Is there a way to set a specific width of the polyline on just one specific layer?
For example, I create a layer called "WIDE", and I want the width of the polyline to be 4". But i want the pline width to be 4" ONLY whenever I draw on this particular layer called "WIDE"; but if I draw on the other layers, the polyline width would be back to the default width. Is this even doable?
I have a dynamic block with several look-up values for the polylines width and I'd like to label them (as a text in the drawing over the block), and be able to move this label where best fits. I've being trying inside the block, but then it can't be moved outside of it. I tried MText with field outside the block, but it has to be applied in many one by one.
Should I use the block itself (how?) or there is a lisp for this? I have a lisp for bearing and distance for lines, which places the bearing text above them and the distance text below those lines, no matter what angle is. It will place in the middle and in the same angle as the line. I edited this lisp file, but how to change it for my purpose, as I don't understanding all the codes inside of it.
I've been searching on and off all morning for a lisp routine, without any luck. I'm trying to draw a pline with a pre determined width (5") and be able to draw unlimited line segments then automatically fillet with a pre determined radius (5").
I wrote this generic macro: ^C^CPLINEWID;5;PL;\\;FILLET;R;5;F;P;LAST; to save SOME time but I want unlimited line segments. Can this be modified or would a lisp be the better route to go?
I have a survey symbol for a tree that is created using two polyline arcs with width to make a solid circle. It is scalable in the desc key by tree size.
Sometimes when I plot a drawing the tree symbols plot (both paper and pdf) as "spokes on a tire", like a line with a polar array. (Even though the style is created with 2 polyline arcs with width)
If I explode the point object (not anywhere near ideal) then it plots as a solid circle as it should.
I don't maintain the template, I just use it, so modifying the point style isn't really an option.
I have not been able to nail down when it occurs and when it doesn't.
It used to be that when you selected a ployline onscreen you could set properties for the line in the properties dialog. With this version of ACAD, if the polyline is not of uniform width on all sections then the global width option is missing from the options dialog.
I know that you can now right click and go polyline/width but i suppose i have been doing this a certain way for so long and now i cant and its annoying.
I have a problem in polyline width. when i set polyline width in one drawing shows solid line & in another drawing shows blank lines.
View 9 Replies View RelatedExisting polyline set to a width of 6. Want to fillet this to a non-polyline with a width of zero.
Currently the two lines will join to create a connected polyline but the original widths are maintained (6 and 0).
I am looking for the system variable where the non-polyline becomes joined and the global width for the new segment matches the first polyline.
With the default cross slope 2% in place and no profile targets, section views with subject sub assembly come up at 0%
there's some polyline width targets but no verticals...
I have a bolt program that draws the thickness of a bolts in elevation as a polyline with a global width, what i need is a lisp to then change this lwpolyline to a hatch, ie if global width is 20 and the polyline is 30 long i need to change this to a 20x30 solid hatch, is it possible to get the the global width and length and convert this to a boundary hatch? I need the same thing done for bolts in plan too as the circle is a lwpolyline also.
View 9 Replies View RelatedI am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedHow do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies View RelatedI have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
I'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
View 2 Replies View RelatedThe code I'm using is supposed to go through all of the layouts and freeze the specified layer in the single viewport that is defined on that layout. It works for some viewports, but not for others. A "List" of the objects show the viewports are the same. I have a LiSP routine that gets me more info about selected objects. The first is a viewport that does not freeze the specified layer, the second does freeze the layer. Here is the code I'm using:
Public Sub FreezeNewLayerInVPs(ByVal pageNumber) Dim doc As Document = Application.DocumentManager.MdiActiveDocumentDim db As Database = doc.Database Dim layerToFreeze As String = "DETAIL_" & pageNumber Using tr As Transaction = db.TransactionManager. Start Transaction( )Dim layTable As LayerTable = DirectCast(tr.GetObject(db.LayerTableId, OpenMode.ForRead),
[code]...