AutoCAD 2010 :: Polyline Global Width Missing From Properties Dialog
Sep 10, 2012
It used to be that when you selected a ployline onscreen you could set properties for the line in the properties dialog. With this version of ACAD, if the polyline is not of uniform width on all sections then the global width option is missing from the options dialog.
I know that you can now right click and go polyline/width but i suppose i have been doing this a certain way for so long and now i cant and its annoying.
View 5 Replies
ADVERTISEMENT
Feb 8, 2010
I have a bolt program that draws the thickness of a bolts in elevation as a polyline with a global width, what i need is a lisp to then change this lwpolyline to a hatch, ie if global width is 20 and the polyline is 30 long i need to change this to a 20x30 solid hatch, is it possible to get the the global width and length and convert this to a boundary hatch? I need the same thing done for bolts in plan too as the circle is a lwpolyline also.
View 9 Replies
View Related
Jun 21, 2011
I installed ArcGIS into my Map3D 2011 and now when I enter the command ADESETCRDSYS there is no longer a dialog box that pops up, it is all in the command line. This wouldn't be a problem, except it doesn't allow you search through the codes. I have looked for a system variable that might control it, comething simular to filedia, but have not been able to find one.
View 2 Replies
View Related
Sep 11, 2012
I am trying to create a block that contains polylines. these polylines need to be able to have the width of them set individually.
What parameter do i need to assign so that this can happen?
View 4 Replies
View Related
Aug 31, 2012
I have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
View 4 Replies
View Related
Apr 18, 2012
I have a problem in polyline width. when i set polyline width in one drawing shows solid line & in another drawing shows blank lines.
View 9 Replies
View Related
Jun 3, 2013
I am using AutoCAD 2011. I have been reading of similar problems with MText: I format the text in the drawing to my desired appearance and once I close and reopen the drawing, the column widths have compressed and muddled the text legibility. After reading other similar posts, I set MTEXTCOLUMN to 0 and changed all MText to "No Columns." MTEXTCOLUMN is still set to 0, but the other properties have reverted back to dynamic columns, so I am still having this problem. To check against this being a problem on my specific workstation, a coworker opened the file on his workstation and experienced the same text compression.
View 9 Replies
View Related
May 1, 2013
I'm new to AutoCAD 2011 (from AutoCAD-14). Is it possible to make the properties dialog box function like it did in AutoCAD-14?If not, can I remove some of the items in the properties dialog box.
View 2 Replies
View Related
Nov 5, 2013
Is there are way to make the size of this dynamic, So you can drag it wider and taller, There are other boxes that seem to be frozen in size. I use this with many custom fields and it's difficult to enter data when you see what your doing.
View 2 Replies
View Related
Oct 12, 2013
whats the difference between creating a width using layers and using polyline width?
View 2 Replies
View Related
Feb 27, 2012
Is it possible to assign a global width to polylines by layer?
I have made changes to one dwg and i now have to apply it to a bazillion more DWG's. But the chnages apply only to a few layers. So i was wondering if i can set the global width to these polylines by layer somehow to save me from doing it "manually"
View 2 Replies
View Related
Apr 25, 2012
I copied some lines with global widths into another drawing and the line is displayed and printed with an outline around the global width of the line in the new drawing.. almost like it is a (3D offset for the global width, and not solid fill)
I have checked my fillmode. "fillmode = 1" and I also checked my UCS "UCS is set to current"
Why is this happening and if it has to do with some inherent properties of that new dwg?
View 3 Replies
View Related
Dec 8, 2011
I have a leader that I want to make the line part of thicker (already made the leader arrow head bigger). I saw that it appeared to be based on dimension style, and I tried changing the lien thickness in there although as we use color dependent plot files, not line weight dependent plot styles, this had no effect.
View 3 Replies
View Related
Feb 22, 2012
Among about a dozen ACAD users in my office, one is missing the "Arch D (landscape)" paper size that accompanies the PC3 file we generally use. I have checked that the roll size and other settings in the machine in question and all of that looks good. I don't want to edit this PC3 as it works for everyone else and don't want to create a new PC3 for this one user.
View 2 Replies
View Related
Dec 9, 2013
I have a drawing with polylines that have a global width of .2 which are plotting thinner than those with a width of 0. If I uncheck "plot object lineweights" it seems to plot correctly but the lines with 0 width plot so light (or grey) that you can't see the drawing well.
View 9 Replies
View Related
Sep 12, 2012
I'm drawing a polyline with a width of 5". In previous versions, the pline would always appear solid. Now it appears clear. I want it to appear solid. If this is editable in the pline properties, or if it's something you turn on after you pick the first point, much like typing 'W' to enter the width?
View 4 Replies
View Related
Jan 14, 2013
i have a set of coordinates, not on the polyline. i want to find the polyline width where that coodinate intersects perpendicular to the polyline (shortest distance). without going through all the vertices.
i have a polyline with many segments with varying width, which are constant through the each segments (no taper width). need to read off the "instantaneous" width.
just 2dpoly or lwpoly not 3d.
i found this
[URL]........
Not quite what i want.
View 9 Replies
View Related
Oct 22, 2012
I am having a problem with trying to come up with a way to create an inventor entity that is like an an autocad multi-width polyline. We make some of our lines in our silk screen as multi-width polylines - see example fig 1. I can't figure out how to accomplish this type of line effect in inventor - see example fig 2. We are actively trying to move from MDT2009 to Inventor and i can recreate most everything except this multi-width polyline.-
View 2 Replies
View Related
Dec 19, 2013
I have a polyline that has been inserted into a block. I want to scale the block so that the start and end points of the polyline can change but the width of the polyline remains constant.
View 2 Replies
View Related
Aug 24, 2011
Can it be done like you can with Text etc?
i know it can be done via lineweights, but you cant "lock" the lineweight in model space,
at the mo, to generate a thinkness in a line i use the global width for that pline.
i dont want to use line weights as i sometimes have multiple lines with different widths on the same layer, i could split the layers, but i'd rather not to.
View 8 Replies
View Related
Sep 20, 2012
I know you can change the width of the polyline by using the command "plinewid". Is there a way to set a specific width of the polyline on just one specific layer?
For example, I create a layer called "WIDE", and I want the width of the polyline to be 4". But i want the pline width to be 4" ONLY whenever I draw on this particular layer called "WIDE"; but if I draw on the other layers, the polyline width would be back to the default width. Is this even doable?
View 7 Replies
View Related
Jan 14, 2011
I have a dynamic block with several look-up values for the polylines width and I'd like to label them (as a text in the drawing over the block), and be able to move this label where best fits. I've being trying inside the block, but then it can't be moved outside of it. I tried MText with field outside the block, but it has to be applied in many one by one.
Should I use the block itself (how?) or there is a lisp for this? I have a lisp for bearing and distance for lines, which places the bearing text above them and the distance text below those lines, no matter what angle is. It will place in the middle and in the same angle as the line. I edited this lisp file, but how to change it for my purpose, as I don't understanding all the codes inside of it.
View 4 Replies
View Related
Feb 5, 2013
I've been searching on and off all morning for a lisp routine, without any luck. I'm trying to draw a pline with a pre determined width (5") and be able to draw unlimited line segments then automatically fillet with a pre determined radius (5").
I wrote this generic macro: ^C^CPLINEWID;5;PL;\\;FILLET;R;5;F;P;LAST; to save SOME time but I want unlimited line segments. Can this be modified or would a lisp be the better route to go?
View 3 Replies
View Related
Sep 13, 2013
I have a survey symbol for a tree that is created using two polyline arcs with width to make a solid circle. It is scalable in the desc key by tree size.
Sometimes when I plot a drawing the tree symbols plot (both paper and pdf) as "spokes on a tire", like a line with a polar array. (Even though the style is created with 2 polyline arcs with width)
If I explode the point object (not anywhere near ideal) then it plots as a solid circle as it should.
I don't maintain the template, I just use it, so modifying the point style isn't really an option.
I have not been able to nail down when it occurs and when it doesn't.
View 1 Replies
View Related
Nov 17, 2013
Existing polyline set to a width of 6. Want to fillet this to a non-polyline with a width of zero.
Currently the two lines will join to create a connected polyline but the original widths are maintained (6 and 0).
I am looking for the system variable where the non-polyline becomes joined and the global width for the new segment matches the first polyline.
View 8 Replies
View Related
Nov 2, 2012
With the default cross slope 2% in place and no profile targets, section views with subject sub assembly come up at 0%
there's some polyline width targets but no verticals...
View 6 Replies
View Related
Jul 10, 2012
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
View 3 Replies
View Related
Mar 1, 2013
I am not sure how to change this, but I am adding polylines and they are coming in with a "Thickness" of 4" in the properties palette (7th option in General area of properties). The Global width is set to 0 and it shows correctly in a 2d plan view, but a 4" thickness if I do a 3dorbit.
View 4 Replies
View Related
Nov 8, 2006
How do you edit the scale property in a polyline layout viewport? I have a polyline layout viewport in Autocad LT 2002 that was created in full version of autocad 2000. Normally in 2002 Lt you can edit the scale properties in a layout viewport, but this is not available when I view the properties of the inserted polyline layout viewport. is there a way of changing the scale in either AutoCAD 2002LT or AutoCAD 2000 (full version)of this polyling layout viewport?
View 5 Replies
View Related
Jul 17, 2013
I was wondering if there is a settings for the displayed values in a polyline's properties. Such as area. Normally it will display square feet but I would like for it to also display acres. I know it a simple conversion, but over the course of a year or more it could save me alot of time.
View 2 Replies
View Related
Oct 1, 2012
What length is shown in properties for a 3D polyline?
A 3D polyline having two nodes at 0,0,0 and 10,0,0 has length of 10.
If I move the second nodes to 10,0,1000 the length is still 10.
Is that the projection in xy-plan?
View 2 Replies
View Related
