Existing polyline set to a width of 6. Want to fillet this to a non-polyline with a width of zero.
Currently the two lines will join to create a connected polyline but the original widths are maintained (6 and 0).
I am looking for the system variable where the non-polyline becomes joined and the global width for the new segment matches the first polyline.
As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
Joining lines into polylines in autocad 2007. Basically, I got stuck when joining several lines together using PEDIT and then Join. At the start, it was very smooth process with no drama. Then, I came across two polylines and wanted to join them together, it just did not work. It works most of the time. Why I can't join certain lines together or two polylines together. This is a 2D drawing CAD.
View 3 Replies View RelatedI'm having a bit of trouble getting my polygon closed without changing the dimensions of the polygon.The drawing attached or at URL....
However I do not know the radius of the angles A, B and C. I know that all the lines have to be the dimensions marked.
Can Autocad automatically bend the angle say, at A without changing the dimensions in order to complete the polygon? I tried this URL.... but found it wasn't what I wanted.
whats the difference between creating a width using layers and using polyline width?
View 2 Replies View RelatedNormally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
I'm using annotative scales. But for example line type scale will also change when I change annotative scale. How can I turn that off.
View 9 Replies View RelatedI've got an intermitent problem with copyclip, pasteclip and Wblocks. The functions work in some files but not other it seems to be dependent on the size of the file, i have 7 xref's in the dwg. i can copyclip to the dwg, but not form dwg. is it due to the size of dwg or what? can it be fixed? OR is there a system variable to set?
View 5 Replies View RelatedACAD 2008. Just noticed all my polylines with width have lost their fill, got outlines only. What have I done?
View 9 Replies View RelatedI have used color to determine line widths. The plotter set-up recognizes color and assigns the appropriate line width. My new company is determining line width by using polylines. Am I behind the times? Or, is this a better way. Willing to change.
View 4 Replies View RelatedIs it possible to create a wall in AutoCAD Architecture that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 6 Replies View RelatedI have an area that needs batt insulation show in it that starts at 6" wide and go to 12" wide. Is there a lisp or hatch that auto scales batt insulation in the same manor a poly can do so?
View 9 Replies View RelatedI've been sent a series of CAD drawings in which the author has used global width to define the appearance of features. I need to import this into our GIS, which for reasons too complex to bother with won't import any attributes such as width. I don't want to lose the information recorded so was wondering if it's possible to create a closed polygon to represent the shape of the line. I guess something might be possible using buffering, but I can't figure out how to use the existing line width.
View 9 Replies View Relatedpolylines in my current drawing have started to come out with a very fat line width. It doesnt matter what layer its on, even though previously they were drawn 'properly' i.e the thin line width that shows when you have show/hide lineweight on 'hide'. This doesnt happen on any other drawing tool (arc, circle, polygon etc). The lineweights in layer control are all 'default'. I can't explain this as it seems to have just happened. Is it a known bug or something?
View 2 Replies View RelatedIs it possible to assign a global width to polylines by layer?
I have made changes to one dwg and i now have to apply it to a bazillion more DWG's. But the chnages apply only to a few layers. So i was wondering if i can set the global width to these polylines by layer somehow to save me from doing it "manually"
Being new to 13LT I'm not sure if they have included a system variable that would allow the origin of a snap inside a command to automatically start at the first selection point. In the old days (ACAD2000) I was able to customize my keypad to function as a protractor with the 5 key being the @ symbol. We did that with an autolisp which rules that out.
View 3 Replies View RelatedI want to have a piece of text added to the drawing notes that uses a field (or similar), to list the coordinate system code assigned to the drawing, i.e. UTM83-12.
Any setvar or something that I can use?
There are load of different coordinate systems to choose from, and I don’t want to have to manually enter it for every drawing.
I am finding with certain types of fonts, mostly on architectural title sheets, that they get substituted to romans font.When I go to the Fontalt Setting Variable though and enter a period for no selection and then regen, all the 'missing" font regenerates and looks fine.
My question is why is the font not appearing properly in the first place? I must have the font if it is appearing properly.I don't want to have to reset the fontalt variable everytime I want to plot a drawing!
How do I change the lineweight system variable
Pressing the command button puts <Lineweight > in the command line.
The last problem I had to search for was to change lineweights
br.LineWeight = 0.35
should be:
br.LineWeight = LineWeight.LineWeight035
I just notice that in 2012 the EXPERT system variable set to 1 no longer suppresses the display of the "Objects moved to frozen or turned off layer" pop up.
View 6 Replies View RelatedI have a computer where all text entered in AutoCAD text/mtext comes out in uppercase. Pressing the shift key while entering the text has no effect. The CAD-Girl involved has admitted to sniffing around in Express Tools System Variables and changing a few, but she cannot remember any more which ones she changed.
View 3 Replies View RelatedWe are unable to set the value for system variable "INSNAME" .
It is returning nothing after assigning values for this variable.
We are using below statement for setting the value.
Application.SetSystemVariable("INSNAME ", "test");
string str1 = Application.GetSystemVariable("INSNAME").ToString();
str1 string value is "" (nothing). and value is not assigning to this variable.
(We are working in AutoCAD 2010. using programming language as .net 3.5).
Every time I open a drawing in AutoCAD 2011 it seems to lock all the xrefs associated with the drawing so when ever some one else tries to open one of the xrefs they can only do so read-only.
Is there a system variable or a setting some where I've accidentally changed?.. I can't seem to find a solution or what the problem even is anywhere.
I was wondering if there was any way to maintain stroke width (with antialiasing off) when importing/resampling vector files, like pdf. photoshop does this, i think.
i made a test case that shows the issue in the attached files. the PDF is a 1px-stroked square. when i try to rasterize it to 100dpi (or any dpi other than 72) using Gimp or any tool that relies on ghostscript for rasterization (imagemagick, mupdf, xpdf) i get a square with unevenly stroked edges. photoshop's algo maintains the stroke width in favor of maybe less optimal positioning.
is there any way to make Gimp or any other pdf->png rasterization tool (ghostscript included) prioritize stroke widths over positioning?
original:
drawing.pdf (Size: 960 bytes / Downloads: 55)
gimp:
photoshop:
Is there a command to combine two 3d polylines into a single polyline? Either combine, take the mean between the two lines, or draw a third line at the mid distance between the two original lines?
The lines are created (in a .dxf) by a GPS unit in the field, and represent tracks needing to be mapped. Typically we would drive out a track and then drive back on the same track; this gives me two 3d polylines. Because of GPS errors it better practice to log the roads/ tracks twice. The lines can have from 2000 to 10000 vertices, so manually drawing is not an option.
I have a drawing with polylines that have a global width of .2 which are plotting thinner than those with a width of 0. If I uncheck "plot object lineweights" it seems to plot correctly but the lines with 0 width plot so light (or grey) that you can't see the drawing well.
View 9 Replies View RelatedIs it possible to create a database resident system variable? My desire is to create a system variable that I can use to expose results of my program, and/or let the user set values that the program can use.
View 6 Replies View RelatedWe are unable to set the value for system variable "INSNAME" .
It is returning nothing after assigning values for this variable.
We are using below statement for setting the value.
Application.SetSystemVariable("INSNAME ", "test.dwg");
(We are working in AutoCAD 2010. using programming language as .net 3.5).
I am having trouble getting my text height to change user the 'textsize' system variable.
When I input a new height at the command prompt using 'textsize' the text height in the text style dialogue box does not automatically change to match. Also when I use the dtext or mtext command after changing the textsize value, these commands use the value in the text style dialogue box instead.
I have a problem setting sysvar like SNAPBASE, which requires 2d point or 3d point. I always get wrong input for the following lines.
double[] point = new double[2] {5,5};
object value1 = point;
Application.SetSystemVariable("SNAPBASE", value1);
what value should I give a 2d point or 3d point?
According to the documentation the FRAME system variable overrides XCLIPFRAME, IMAGEFRAME, etc., has four valid values, 0, 1, 2, or 3, and its initial default value is 3. While editing a drawing, I set FRAME to 0, and then some time later, tried to set it back to 3. AutoCAD refused to accept this value, saying "Requires an integer between 0 and 2." Typing (SETVAR "FRAME" 3) at the command line also failed. The only way I could get it back to 3 was to use UNDO to go back to the default value. Is this a bug?
View 3 Replies View Related