AutoCad :: Combine Two 3D Polylines Into Single Polyline?

Aug 29, 2012

Is there a command to combine two 3d polylines into a single polyline? Either combine, take the mean between the two lines, or draw a third line at the mid distance between the two original lines?

The lines are created (in a .dxf) by a GPS unit in the field, and represent tracks needing to be mapped. Typically we would drive out a track and then drive back on the same track; this gives me two 3d polylines. Because of GPS errors it better practice to log the roads/ tracks twice. The lines can have from 2000 to 10000 vertices, so manually drawing is not an option.

View 4 Replies


ADVERTISEMENT

AutoCad :: How To Draw 3D Polylines Or Convert Single Lines To Polylines

Oct 9, 2013

How to draw 3D polylines, or convert single lines to polylines?

this.JPG

View 7 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Reduce Polyline With Multiple Vertices To Single Polyline

Jun 7, 2012

I would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?

View 4 Replies View Related

AutoCad :: Stretching Vertices Of One Polyline Grabbing Other Polylines As Well

Oct 30, 2012

I have two polylines. Segments of one polyline are directly on top of segments of the other polyline. When I grab one of the polylines to stretch the vertices, it grabs the vertices of the polyline underneath.

View 1 Replies View Related

AutoCAD Map 3D :: How To Select All Polylines Based On Polyline Object Data

May 17, 2011

I have polylines that when selected, under properties it lists Object Data for the selected polyline. There are like 10 categories. This drawing is actually creeks in a county and they have object data connected to them where some are "a" some are "b" classification and I want to select all of the "a" polylines and put on a diffrent layer.

View 1 Replies View Related

AutoCAD 2010 :: Combine Multiple Drawing Views Into Single DWF File?

Jan 29, 2012

Can the Plot command be used to combine multiple drawing views into a single DWF file?

View 1 Replies View Related

AutoCAD LT :: System Variable To Maintain Polyline Width When Joining Non-polylines?

Nov 17, 2013

Existing polyline set to a width of 6. Want to fillet this to a non-polyline with a width of zero.

Currently the two lines will join to create a connected polyline but the original widths are maintained (6 and 0).

I am looking for the system variable where the non-polyline becomes joined and the global width for the new segment matches the first polyline.

View 8 Replies View Related

AutoCAD Civil 3D :: Combine Pipe Networks From Separate Files Into A Single File

Jul 16, 2013

I need a way for 2 users to work on a pipe network at the same time.  I was thinking about creating Data Shortcuts, but I’m looking for a better way to accomplish this.  For example, can I export a pipe network created by another user into a master file? (which contains all my networks consolidated together).   I want to work on one part of the network while another user works on another part of the network then combine into a single file so that I reference everything into our P&P sheets.

View 5 Replies View Related

AutoCad :: Join Polylines To Convert Cube Contours To Single Object

Oct 16, 2012

I drew a cube using polylines by changing ucs. I want to join the polylines so that the cube contour becomes one single object.

Since the lines are in different planes I can not join them. How could I unite those 12 lines so they become a cube non solid(I plan on placing a sphere inside some of the cubes and then use "shade" for visualization so if the cube is solid I won't see the spheres).

View 9 Replies View Related

CorelDRAW X5 :: Combine All Pages Into Single Page

Aug 10, 2012

I have 100 of pages of a clients logos, I want gather them into a single A3 page, normally we can do this thing by giving print command (Imposition tool in print preview) but we can get PDF output or can directly print it, but I require cdr, so is this possible? I tried making PDF and importing it into corel but most of logos not coming well bcz those are bitmap, some bitmaps are viewing as a horizontal sliced.

View 3 Replies View Related

Photoshop :: Combine Different RAWs From A Single Photo

Mar 27, 2006

I'd like to combine two different RAW exposure settings into a single JPEG. I've done this in the past by importing two RAW files at different exposure values, then selecting from one photo, feathering, and copy/paste into the other photo. This proved to be very time consuming and no where near perfect.

I thought Photoshop CS2's "Merge to HDR" function would be ideal for automating this process, but it won't take the two different RAW imports as input because it knows they're from the same photo.

View 2 Replies View Related

AutoCAD .NET :: Filtered Objects Into A Single Polyline?

Jul 11, 2013

I am filtering for objects based on layer as shown below.The layer consists of lines and arcs.Is there anyway to convert all these entities into a polyline and get the object id of this single entity.

Dim acTypValArPath(0) AsTypedValue
 Dim sf As SelectionFilter = New SelectionFilter(New TypedValue() {New TypedValue(8, "FirstBias")})
Dim ss As SelectionSet = acEditor.SelectAll(sf).Value 
Dim idarray As ObjectId() = ss.GetObjectIds()

[code]....

View 9 Replies View Related

CorelDRAW X5 :: Combine Shape Into Single Object Created By 3 Hexagons - Reducing Lines

Feb 10, 2012

I have a shape created by three hexagons and they are abutted along edges. I would like to combine them into a single object and in doing so reduce the lines so that the abutted lines become one line. the reason is that currently they are processed twice along each abutted line by my laser.

I can use combine but this still leaves them as discrete editable shapes in node editor, so clearly the double lines are still there.

If I use weld I lose the lines.

View 13 Replies View Related

AutoCad 2D :: Combine Multiple Mtext Into Single Mtext?

Jun 1, 2007

Autocad Express Tools allows converting text to mtext. How would I be able to combine multiple mtext into a single mtext?

View 7 Replies View Related

Illustrator :: Files Don't Show Up In Acrobat File List When Trying To Combine Files Into Single Pdf?

Sep 24, 2013

Illustrator files don't show up in Acrobat file list when trying to combine files into a single pdf

View 9 Replies View Related

Photoshop Elements :: Combine Two Side-by-side Photos Into Single Photo?

Oct 30, 2013

Is it possible to combine two side-by-side photos into a single photo

View 1 Replies View Related

AutoCAD 2010 :: Converting Polylines With Width And Text Into Close Polylines

Jan 2, 2014

As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,

To put things into prospective, here is an example:

The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.

My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.

View 2 Replies View Related

AutoCad :: Converting 3D Polylines To Polylines With Elevation?

Jan 20, 2006

Is there a way of converting 3d polylines to polylines with an elevation?

I have a dwg of contour information, the contours are 3d polylines, because they are contours the z value is constant all along the line, so there no question what the elevation of the polyline would need to be.

I need to do this as I then need to import the dwg into a GIS programme called MapInfo whch doesn't read 3d polylines.

I have access to AutoCAD 2004 or 2005LT.

View 9 Replies View Related

AutoCad 2D :: Drawing Polyline To Have Tooltip Box Show Cumulative Length Of Polyline

Nov 6, 2013

Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?

View 6 Replies View Related

AutoCAD Visual LISP / AutoLISP :: 3D Polyline To Polyline To Spline With Max

Sep 21, 2013

Due to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:

- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties

You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.

I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?

Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.

However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.

how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.

View 5 Replies View Related

AutoCAD .NET :: Getting Polyline Data Into A Custom Derived Object (from Polyline)

Nov 11, 2013

I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.

(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.

View 3 Replies View Related

AutoCAD Civil 3D :: Convert Metric 3D Polyline To 2D Polyline

Jun 29, 2013

I want to convert a 3D polyline to 2D polyline.

View 5 Replies View Related

AutoCad :: Automatic Join Polyline Onto Existing Polyline?

Sep 16, 2011

Is there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??

I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.

View 7 Replies View Related

AutoCAD Civil 3D :: Align Polyline Onto Another Polyline

Mar 22, 2012

Any way I can align a new polyline to a reference polyline (orig polyline).

The 2 polys will be generally the same length, however, the number of vertices will differ.

Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.

View 9 Replies View Related

AutoCAD .NET :: How To Find If Polyline Is Inside Another Polyline

May 18, 2011

How do you find 'if' a polyline is inside another polyline?

View 2 Replies View Related

AutoCAD 2010 :: Polyline To 2D Polyline?

Mar 2, 2012

How do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.

View 4 Replies View Related

AutoCad 2D :: How To Convert 2D Polyline To Polyline

Jun 25, 2008

I have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.

View 9 Replies View Related

Photoshop :: Change The Colour Of A Single Layered, Single Coloured Gradient (foreground To Transparent) Image

Jun 21, 2008

I would like to know how to change the colour of a single layered, single coloured gradient (foreground to transparent) image. There is nothing more to it than that other than I don't want to use the hue/saturation adjustment as it's hard to get a specific colour.

View 7 Replies View Related

AutoCAD Map 3D :: Select Polyline By Intersecting Polyline (select By Location)

Aug 10, 2012

I can do this in AutoCAD Map but I have my doubts. I will explain in ESRI GIS terms (this is what I am familiar with) and I hope you can tell me if I can do this in AutoCAD Map. In ESRI ArcMap I can select a line and I can hit a Select by Location button. In this window I can select all of the objects that intersect my selected line. Then I can delete them or export them etc.

In AutoCAD Map I have a polyline selected. It is my road centerline. I want to be able to select all of the other polylines that intersect my selected polyline. Is there a way to do this? I need to erase those polylines. Usually I will pan to each of them and select them individually. It just seems to take a lot of time.  My AutoCAD co-worker said I could use a fence and draw the fence through my polylines. It seemed to work ok but I accidently deleted extra things that I needed. So I'm back to manually selecting each one by one unless you know a different way.

View 8 Replies View Related

AutoCAD Civil 3D :: How To Convert 3D Polyline Contour To Polyline Contour

Mar 24, 2013

How to convert a 3D Polyline contour to Polyline contour.

View 4 Replies View Related

AutoCAD Map 3D :: How To Combine Records

Jun 20, 2011

Combine records Thats what I'd like to do - can I combine records?

I'd like to do it in a join process. Can it be done?

Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved