AutoCAD Map 3D :: Select Polyline By Intersecting Polyline (select By Location)
Aug 10, 2012
I can do this in AutoCAD Map but I have my doubts. I will explain in ESRI GIS terms (this is what I am familiar with) and I hope you can tell me if I can do this in AutoCAD Map. In ESRI ArcMap I can select a line and I can hit a Select by Location button. In this window I can select all of the objects that intersect my selected line. Then I can delete them or export them etc.
In AutoCAD Map I have a polyline selected. It is my road centerline. I want to be able to select all of the other polylines that intersect my selected polyline. Is there a way to do this? I need to erase those polylines. Usually I will pan to each of them and select them individually. It just seems to take a lot of time. My AutoCAD co-worker said I could use a fence and draw the fence through my polylines. It seemed to work ok but I accidently deleted extra things that I needed. So I'm back to manually selecting each one by one unless you know a different way.
View 8 Replies
ADVERTISEMENT
Nov 6, 2013
I am currently dealing with a question for a project I am working on. I have a complex building, in which all rooms are described by a tag. The tag is a block which contains as attributes several kinds of information about that room (height, finishing, etc.). One attribute is the surface of the room, which is linked to a polyline by a field (if the polyline changes, the surface attribute changes consequently.
Now, basing on the fact that there is a correlation between my block containing the attributes and the polyline (the correlation is given by the surface field), I would like to select polylines in my drawing basing on specific values in my attributes block. Example: I want to select all the polylines which are linked to the blocks containing as an attribute the text "1.1.1.1.1", or the polylines linked to a block containing as an attribute the text "library".
This would save me loads of time to generate some specific drawings.
View 2 Replies
View Related
Aug 19, 2011
Is there a way to select more than one polyline at a time and get a total LF of all of them together?
View 4 Replies
View Related
May 23, 2011
Is there a way to select objects within a closed polyline? I thought there was but I can't remember how to do it.
View 2 Replies
View Related
Mar 30, 2011
Im practicing for my CAD certification test and im trying to select all objects inclosed in a poly line. Right now i have a bunch of random circles and a random figure drawn in the middle of a bunch of circles. How do i select ONLY the circles that are completely in the object?
P.S. I would add a picture but i don't know how to take a screenshot on windows xp.
View 9 Replies
View Related
Mar 20, 2012
My Computer just recently jusst got switched to a new server...
Somethings are just acting weird now, like my hatching...
All my old hatches that were associative are acting like one seltions like if i hatch a polyline now when i go to select that hatch it now selects the polyline as well.
This never happened before abd the only way to edit it now is to either make it in the properties not associative then i lose my boundary or just to explode it then i a ihave an exploded hatch...before i made it assoc. and i could just edit or select the hatch only i think its an option setting...
View 1 Replies
View Related
May 17, 2011
I have polylines that when selected, under properties it lists Object Data for the selected polyline. There are like 10 categories. This drawing is actually creeks in a county and they have object data connected to them where some are "a" some are "b" classification and I want to select all of the "a" polylines and put on a diffrent layer.
View 1 Replies
View Related
Mar 30, 2012
I need user to draw a closed ployline. Is it possible to use VBA to code a procedue that the effect looks like the WPolygon of select ?(2 rubber-band lines)
View 1 Replies
View Related
Aug 5, 2013
I would like to select a polyline that will either be straight or contain bulges and offset lines either side of it a prescribed amount, I have tried a couple of options that don't involve picking points on both sides to no avail.
View 4 Replies
View Related
May 13, 2011
How can I drag-select muliple vertex points form a polyline, a workaround I found is:
-select object
-shift select first vertex, shift select next vertex, etc
But this workaround is limited because I want to delete those vertexes, I cannot find the remove vertex command when I have multiple vertexes selected.
View 2 Replies
View Related
May 1, 2012
I always get the message after I make a closed boundary polygon, and I know it's a closed boundary, but I know how to fix it. It just bugs me sometimes when the message pops up when I add it as a boundary under the definition of a surface.
View 2 Replies
View Related
Nov 6, 2013
Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies
View Related
Jun 7, 2012
I would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies
View Related
Sep 21, 2013
Due to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
View 5 Replies
View Related
Nov 11, 2013
I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
View 3 Replies
View Related
Aug 22, 2012
I want to be able to select all objects whose paths intersect with the currently selected path
What I want to do is to start with the red circle selected as below:
The result that I want should look like this:
View 3 Replies
View Related
Jun 29, 2013
I want to convert a 3D polyline to 2D polyline.
View 5 Replies
View Related
Sep 16, 2011
Is there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
View 7 Replies
View Related
Mar 22, 2012
Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
View 9 Replies
View Related
May 18, 2011
How do you find 'if' a polyline is inside another polyline?
View 2 Replies
View Related
Mar 2, 2012
How do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies
View Related
Jun 25, 2008
I have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies
View Related
Mar 24, 2013
How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies
View Related
Dec 14, 2011
Land Desktop 2009 Civil 3D Companion
When I issue the Wblock Command I can not find the Dialog box to select objects and file location... This happens in the Layer Dialog when I try to change the color of a layer, the Color Dialog box can not be found. When I use the Block command the dialog box pops up, so I can see it.
fildia>1
cmddia>1
attdia>0
View 9 Replies
View Related
Oct 26, 2011
In Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies
View Related
Sep 5, 2013
I accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
View 2 Replies
View Related
May 15, 2008
Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies
View Related
Oct 4, 2013
master im new in autocad 2014....i have a problem now when i select line or object it highlight or make a broken line....but when i select the other object or line my previous selected back to normal..i mean i can select only one line if i use single selecting....how to select all object or line with single select continuously, except using hold left click...
View 1 Replies
View Related
Oct 9, 2012
When I click the select tool, a brown selection type of rectangle appears in a particular area of the illustration, even though I have not clicked on the illustration yet. I assume it is some type of warning indication, but don't know what. P.S. It is draggable and scaleable - I can move it off the artboard. An example:
View 5 Replies
View Related
Jun 18, 2013
I know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
View 5 Replies
View Related
Dec 19, 2012
I work with shapes all day designing mobile apps. Thus, I'm constantly selecting and resizing rounded rectangles. When resizing I have to individually select all four points of a side to move it without distorting the rounded corners. I cannot click and drag, because that will activate any shapes underneath the one I want to select.
I'm looking for a plugin or alternative to easily select the entire side of a rounded rectangle. IE - I click one point on a side, and it auto selects all four points on that side, or the like.
View 3 Replies
View Related
