AutoCAD 2010 :: Polyline To 2D Polyline?
Mar 2, 2012How do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies
ADVERTISEMENT
AutoCad 2D :: Drawing Polyline To Have Tooltip Box Show Cumulative Length Of Polyline
Nov 6, 2013Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Reduce Polyline With Multiple Vertices To Single Polyline
Jun 7, 2012I would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: 3D Polyline To Polyline To Spline With Max
Sep 21, 2013Due to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
AutoCAD .NET :: Getting Polyline Data Into A Custom Derived Object (from Polyline)
Nov 11, 2013I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
AutoCAD Civil 3D :: Convert Metric 3D Polyline To 2D Polyline
Jun 29, 2013I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedAutoCad :: Automatic Join Polyline Onto Existing Polyline?
Sep 16, 2011Is there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
AutoCAD Civil 3D :: Align Polyline Onto Another Polyline
Mar 22, 2012Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
AutoCAD .NET :: How To Find If Polyline Is Inside Another Polyline
May 18, 2011How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedAutoCad 2D :: How To Convert 2D Polyline To Polyline
Jun 25, 2008I have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedAutoCAD 2010 :: How To Convert Solid To Polyline With Mechanical 2010
Nov 8, 2012I'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
What am I missing here?
AutoCAD 2010 :: How To Get Polyline Length
Mar 11, 2012How to get the individual polyline length of the entire drawing as per the name of the line written against him in the excel sheet. That would prepare the Bar bending schedule quickly.
View 2 Replies View RelatedAutoCAD 2010 :: Polyline To 3D (Pipe)
Feb 14, 2012I created a polyline and I cannot, for the life of me, remember the command to make it a 3D line, aka: pipe. I need to make a 4" pipe follow a line I drew.
View 3 Replies View RelatedAutoCAD 2010 :: How To Fillet 3D Polyline
Sep 17, 2011How to fillet a 3D polyline with AC2012?
OR
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
AutoCAD 2010 :: Polyline Width In Blocks
Sep 11, 2012I am trying to create a block that contains polylines. these polylines need to be able to have the width of them set individually.
What parameter do i need to assign so that this can happen?
AutoCAD 2010 :: Extrude 3D Polyline Into 3D Solid?
Jul 19, 2012I've had a problem for a while now trying to extrude a 3d polyline into a 3d solid. The polyline is on different planes which is one cause of why it won't work. Instead of extruding into a solid it only does the sides making it a mesh rather than a solid. If its on one plane I know it will work.
View 2 Replies View RelatedAutoCAD 2010 :: Joining Lines To Become A Polyline?
Mar 20, 2012Normally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
AutoCAD 2010 :: Divide And Measure Between Polyline?
Aug 1, 2012Any command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need something that would be faster, use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and ther divide it on 4 or 3 parts.
AutoCAD 2010 :: Gives Wrong Area For A Polyline
Apr 5, 2011Autocad 2011 and 2011 LT both give the wrong area for sertain polylines. While Autocad 2005 gives the correct area.
Its terrifying how many official documents may be wrong because of this bug.
AutoCAD 2010 :: Vertices Of Polyline Can't Be Extracted?
Mar 6, 2012The vertices of the polyline cant’ be extracted!
The “list” command does give the coordinates of the vertices of the polyline while these data can’t be extracted by using the command “Extract Data”.
Is there some workaround to have the vertices of the polyline extracted in a table?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Convert 3DFace To Polyline
Nov 10, 2010I am some trouble working with 3dface. I want convert 3dface to polyline but in some cases I faces with problem that a 3dface don't convert surface or solid.
View 9 Replies View RelatedAutoCAD Map 3D :: Select Polyline By Intersecting Polyline (select By Location)
Aug 10, 2012I can do this in AutoCAD Map but I have my doubts. I will explain in ESRI GIS terms (this is what I am familiar with) and I hope you can tell me if I can do this in AutoCAD Map. In ESRI ArcMap I can select a line and I can hit a Select by Location button. In this window I can select all of the objects that intersect my selected line. Then I can delete them or export them etc.
In AutoCAD Map I have a polyline selected. It is my road centerline. I want to be able to select all of the other polylines that intersect my selected polyline. Is there a way to do this? I need to erase those polylines. Usually I will pan to each of them and select them individually. It just seems to take a lot of time. My AutoCAD co-worker said I could use a fence and draw the fence through my polylines. It seemed to work ok but I accidently deleted extra things that I needed. So I'm back to manually selecting each one by one unless you know a different way.
AutoCAD Civil 3D :: How To Convert 3D Polyline Contour To Polyline Contour
Mar 24, 2013How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedAutoCAD 2010 :: Fitting Polyline Contour To A Curve
Nov 19, 2012I have a sinusoidal curve, that I've created using a third party app, which has worked really well. But the app only produces the form in a straight line and i now need to fit it to a number of curves.
I have a form of 3 radii and a couple of flats, which the sinusoidal form needs to fit along. All this work is just in 2D as i need to output the dxf into a CNC machine.
AutoCAD 2010 :: Explode Polyline / Polygon Within Block
Jul 23, 2012I would like to explode a polygone I've created within a block.
But I get the "_amexplode This command is not allowed while the REFEDIT command is active."
Um so, I have to explode the block, explode the ployline/polygone and recreate the block.
Or, I could minus the polygone from the block set, save the block, explode the polygone, reopen the block and add the lines back in.
I don't see an explode option in the "pedit" options.
Am I missing something here, is there more than one explode command now? It worked in a previous version.
AutoCAD 2010 :: Polyline Not Solid After Changing Width
Aug 31, 2012I have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
View 4 Replies View RelatedAutoCAD 2010 :: Hatch Lines Across Polyline Zone?
Mar 7, 2013Scren shot attached
I am hatching (a very quick sketch for info) but the hatch lines are going across the ploy line zone.
What happening. I cannot snap to these, but if in put a selection window acorss an of the lines, it will select the hatch.
I dont want to see these and dont want to have to hatch indivual rectangles. Never seen this before.
I cannot see anythign obvious in any of the settings.
AutoCAD 2010 :: Unable To Open A Closed Polyline
May 14, 2009I drew a very complicated 2-D plot this afternoon. The most majority of the plot is composed of different straight lines, arcs. Then I used the polyline function to join them together to form a closed single polyline (Modify->object->polyline).
Later on I want to change something in part of the polyline. Then I used the 'pedit' again, I chose 'open'. But the whole polyline won't break into its original segments. I tried through all the menus, just cannot find the right tool for this purpose.
Does it mean I have to start over from scratch to redraw the whole plot?
AutoCAD 2010 :: Converting Complex Shapes To Polyline?
Nov 14, 2013I recently exploded text but now i need it to be a Polyline, when using PEDIT.
View 1 Replies View RelatedAutoCAD 2010 :: Fillet On 3D Polyline - Sweep Path
Jun 26, 2013Is there a way to sweep a 3d polyline in AutoCAD 2012? Colleague has a sweep path that he wants to put radii in the corners. I know that in the past you could not do it. I didn't see anything in any post that told me otherwise.
View 3 Replies View RelatedAutoCAD 2010 :: Individual Polyline Length Along With Name Of Text In Front Of Them?
Mar 11, 2012I want to export the length of each polyline individuality & simultaneously in different -2 columns/row. How to prepare the Bar bending schedule. I am appending the drawing .
View 1 Replies View Related