I've had a problem for a while now trying to extrude a 3d polyline into a 3d solid. The polyline is on different planes which is one cause of why it won't work. Instead of extruding into a solid it only does the sides making it a mesh rather than a solid. If its on one plane I know it will work.
View 2 RepliesI am not able to extrude closed polyline shapes. I get the following message:
Cannot create solid from open curve.
Cannot sweep or extrude non-planar objects.
Unable to extrude the selected object.
Other folks have opened my drawing – some can extrude, some get the same or similar message. I’ve tried re-building the shapes to extrude. It worked with one thing this morning and now it won’t extrude again.
How to permanently change the settings of the EXTRUDE command so my polylines, by default, will become a solid instead of a surface object?
View 5 Replies View RelatedI'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
What am I missing here?
I have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
View 4 Replies View RelatedI have region is in external dxf file,how to extrude it along polyline?I can't get region after using dxfin method
Database myDxfDb = new Database(false, true);myDxfDb.DxfIn(filename, logFilename);Matrix3d dxfTrf = Matrix3d.Identity; _ThisDatabase. Insert(dxfTrf, myDxfDb, true);ThisDatabase.UpdateExt(true); myDxfDb.Dispose();acTrans.Commit();ObjectId id = AcUtils.EntLast();Entity _ent = (Entity)acTrans. Get Object(id, OpenMode.ForWrite);
I draw a closed polyline and then I extrude it. But when I want to see the 2d plane and hide the 3d version I cannot go back as the polylines are extruded and everything is disappearing. Should I draw a second poly over the first, then create a new layer, name it for example 3dpolywalls ? Is this the most common technique? Or there is a more efficient way ?
View 2 Replies View RelatedI'm trying to model a 3d leadscrew. How can I extrude a 2d closed polyline in a straight line while at the same time twisting it (360° twist for every 1.5" along the path). I've tried loft, sweep, extrude all using the helix as a path. When I can get a result, it ends up being a corkscrew.
View 9 Replies View RelatedCan you lock the extrude mode to solid?
View 9 Replies View Relatedim drawing by using spline and cannot extrude into solid after I change the height along z axis..how can i make it into solid? here my drawing.. i try using loft but also give surface loft
View 3 Replies View RelatedI inserted an an Angle block from PE Symbols into my Drawing, but it is only 2 dimensional.
I have forgotten how to change the block to a solid, and then to extrude it to a given length.
When I create a sketch then extrude it to a solid model, how can I modify the sketch afterwards?
View 7 Replies View RelatedAs part of a larger job we have surveyed the top of a dry stone wall. The client now wants that we make a solid for him from the surveyed points with a height of 2000mm (the drawing units are in millimetres).
A 3d polyline was created from the lines joining the points and I have that in the attached drawing.
I'm not looking for someone to create the wall, but I'm looking for the method to do it, as it will certainly crop up again with this new client. I've tried many ways in both AutoCAD and Civil 3D but just can't create the solid.
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I'm trying to create a Solid 3d that is the extrusion solid af a closed polyline by a given height
I select the polyline that i do this
Solid3d s = new Solid3d();
s.CreateExtrudedSolid(selectedPolyline, new Vector3d(0, 0, 20), new SweepOptions());
but Autocad throw an Invalid Input exception.
i'm applying an extrude modifier to a simple spline shape, and i am accustomed to the extrude modifier generating a solid 3d object in the shape of the spline, if the spline is a closed shape.
however, in this case, the extrude modifier is generating just a 3d outline based on the spline's shape...
i can't figure out why i'm not getting a solid 3d object since the spline is closed (i checked all the vertices).
file is attached (the spline in question is named "upper side section")
daniel_k_sancturary_one07_1.zip
I have discovered a 3D polyline cant be joined to a 2D polyline and when i exploded 3Dpline then flattened it ,as recommended elsewhere on this forum,it seems its shrunk in length.The NC router I have access to has to use 2D polyline for the path of the cutter.wish i could simply fed the 3D object into the NC router software and that was all i had to do.
View 9 Replies View RelatedHow do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedAny routine that would allow you to cut out an odd shape from a solid with the profile of a polyline?The goal would be to have all the pieces that are left, not subtract them out..
View 3 Replies View RelatedIs there a setting for extruding polygons so it doesnt leave the original polygon.
When i extrude a polygon into a 3D solid, it extrudes fine but it also keeps the original polygon which means i have to delete it?
I've got a DWG file generated from a software called 12D. It contains a polyline model of an embankment. I've imported it into Max and wanted to create 3D solids out of it so I can further manipulate this model and render.
I'm struggling to convert it into a 3D solid. I have tried the extrude and loft modifiers, but unable to get them to loft or extrude along the poly lines.
So I' thinking I may recreate the whole object from scratch vertex by vertex. How I can create a solid without recreating the whole object?
Attached a part of it for example here: [URL] ......
How could i explode text
I want to explode text in a particular font and then extrude
[URL]
How to stop the UCS from automatically turning to world when extruding a circle?
Example: If you start with a circle drawn to your set 3 point UCS the quadrants are in line with the X & Y but as soon as you extrude the circle into a cylinder the UCS turns the quadrants to world, I want the quadrants to stay in the same place as my 3 point UCS position.
Not sure if it's just a system variable that need changing.
How to get the individual polyline length of the entire drawing as per the name of the line written against him in the excel sheet. That would prepare the Bar bending schedule quickly.
View 2 Replies View RelatedI created a polyline and I cannot, for the life of me, remember the command to make it a 3D line, aka: pipe. I need to make a 4" pipe follow a line I drew.
View 3 Replies View RelatedHow to fillet a 3D polyline with AC2012?
OR
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
I am trying to create a block that contains polylines. these polylines need to be able to have the width of them set individually.
What parameter do i need to assign so that this can happen?
Normally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
Any command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need something that would be faster, use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and ther divide it on 4 or 3 parts.
Autocad 2011 and 2011 LT both give the wrong area for sertain polylines. While Autocad 2005 gives the correct area.
Its terrifying how many official documents may be wrong because of this bug.
The vertices of the polyline cant’ be extracted!
The “list” command does give the coordinates of the vertices of the polyline while these data can’t be extracted by using the command “Extract Data”.
Is there some workaround to have the vertices of the polyline extracted in a table?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.