Any command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need something that would be faster, use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and ther divide it on 4 or 3 parts.
Is it possible to divide a polyline into multiple segments with a certain interval?I am looking for something similar to "Measure" command.But I want to do this programmatically.
SendStringToExcute("measure ");
I need the point objects created by "measure' command in order to draw a new polyine with them.Of course, "SendStringToExcute" does not return such object collection.If you could provide me with C# (or .NET ObjectARX 2010) code snippet.
do you know command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need sommething that would be faster,know is use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and then divide it on 4 or 3 parts.
For once I have to place many asymetric objects uniformly with Alignment along a convex circular arc (2D). So I try Measure or Divide using my Block but it flips my Block so it is aligned with the inside of the curve (closest to the curve centre) not the outside and the blocks are turned upside down. If I draw an arc concave up it plots OK. If I draw a Spline (single curve or reverse curve (S curve) in my desired orientation, it also plots OK.
I have tried all combinations of UCS but to no avail. The block is not dynamic so there has not been any Alignment set.
When dividing, say, an arc into 4 equal parts. The point showing up on the object are so small, I can't see them! How can I change the tiny dot to a "x" or "=" or anything that I read?
View 2 Replies View RelatedHow to use the divide and measure command , and also I knew how to change the point style. But after I used the divide command to split my object into 5 parties. I can not click the point I created.
For a instance I have a 10 meters line and I used the divide command to divide it into 5 parties, and so I have 4 points. But if i want to draw some thing on the new point my mouse could not click it.
[URL].......
I cant do what the guy did in the video. when I move my mouse on those points I created I could not connect a line on the point like the guy did.
The task should be similar to the _measure command but, I would like to divide the spline into lengths that I give in input. (Decided by user)
e.g. Length of spline: 10.000 meters
Place a block at length:
- 1238 m
- 2005 m
- 2018 m
- 2458 m
- 4098 m
and so on..
How I can do that? It would be perfect if it would be possible to give an excel file with the length values.
well i have a homework for the exams and i have no time,The question is, how i can measure the exact length of an arc (or a polyline) ? See the pic. ghrrhhr.JPG
View 3 Replies View RelatedI need to divide thousands of lines into half, but AutoCAD divide command can only allow you to select one line at a time.Is there any way we can divide multiple lines at once.
View 3 Replies View Relatedcan I divide a line into variable-running parts is there a command?
View 1 Replies View RelatedHow do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedHow to measure the indicated angle? I’m wondering why the AutoCAD can’t measure the angles indicated (magenta) in the screenshot below! The dwg file is attached
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I was recently upgraded from AutoCAD 2005 to AutoCAD 2012. I set my interface to AutoCAD Classic. When I check the Measurement Tools (toolbar) the ribbon appears, but I can not move the toolbar. I run two displays, so the the measure tool shows up on one all the time.
View 2 Replies View RelatedWhen I use the measure distance command, I have to exit out of the command before I move on to my next command. I'm used to measuring once and the command automatically exits (in previuos releases). Is there a variable that will exit the command after one measurement?
View 4 Replies View Relatedcan i view the 1:1 drawing as it on A3 without taking print out...i mean to say if i draw 100mm straight line can i measure with the scale on monitor.
View 2 Replies View RelatedI want to chose the better, to start drawing. I use inches at work, but I want to use international system for myself for personal projects
I think there is a standard unit in files imported o r exported from another soft, smaller files, easier size to process by pc, quicker units to introduce, accurate, prototyping models soft compatibility, etc.
Any previous criteria for recommendation is perfect.
¿Which is the best measure units to use?
Spoiler (Highlight to read)
I'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
What am I missing here?
How to get the individual polyline length of the entire drawing as per the name of the line written against him in the excel sheet. That would prepare the Bar bending schedule quickly.
View 2 Replies View RelatedI created a polyline and I cannot, for the life of me, remember the command to make it a 3D line, aka: pipe. I need to make a 4" pipe follow a line I drew.
View 3 Replies View RelatedHow to fillet a 3D polyline with AC2012?
OR
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
I am trying to create a block that contains polylines. these polylines need to be able to have the width of them set individually.
What parameter do i need to assign so that this can happen?
I've had a problem for a while now trying to extrude a 3d polyline into a 3d solid. The polyline is on different planes which is one cause of why it won't work. Instead of extruding into a solid it only does the sides making it a mesh rather than a solid. If its on one plane I know it will work.
View 2 Replies View RelatedNormally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
Autocad 2011 and 2011 LT both give the wrong area for sertain polylines. While Autocad 2005 gives the correct area.
Its terrifying how many official documents may be wrong because of this bug.
The vertices of the polyline cant’ be extracted!
The “list” command does give the coordinates of the vertices of the polyline while these data can’t be extracted by using the command “Extract Data”.
Is there some workaround to have the vertices of the polyline extracted in a table?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am some trouble working with 3dface. I want convert 3dface to polyline but in some cases I faces with problem that a 3dface don't convert surface or solid.
View 9 Replies View RelatedIm trying to show some measurements in layout view. But when i dimension between 2 points i get the number 71,84. When i use the measure tool in model view i get 1150mm which is the correct length.
Sure there is some simple reason why the two arnt coming in with the same value. Also it isnt an issue with Units as i have checked both and they are both in millimetres.
I have a sinusoidal curve, that I've created using a third party app, which has worked really well. But the app only produces the form in a straight line and i now need to fit it to a number of curves.
I have a form of 3 radii and a couple of flats, which the sinusoidal form needs to fit along. All this work is just in 2D as i need to output the dxf into a CNC machine.
I would like to explode a polygone I've created within a block.
But I get the "_amexplode This command is not allowed while the REFEDIT command is active."
Um so, I have to explode the block, explode the ployline/polygone and recreate the block.
Or, I could minus the polygone from the block set, save the block, explode the polygone, reopen the block and add the lines back in.
I don't see an explode option in the "pedit" options.
Am I missing something here, is there more than one explode command now? It worked in a previous version.
I have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
View 4 Replies View RelatedScren shot attached
I am hatching (a very quick sketch for info) but the hatch lines are going across the ploy line zone.
What happening. I cannot snap to these, but if in put a selection window acorss an of the lines, it will select the hatch.
I dont want to see these and dont want to have to hatch indivual rectangles. Never seen this before.
I cannot see anythign obvious in any of the settings.