AutoCad :: How To Click Point Created By Used Divide Measure Command
Jul 18, 2013
How to use the divide and measure command , and also I knew how to change the point style. But after I used the divide command to split my object into 5 parties. I can not click the point I created.
For a instance I have a 10 meters line and I used the divide command to divide it into 5 parties, and so I have 4 points. But if i want to draw some thing on the new point my mouse could not click it.
[URL].......
I cant do what the guy did in the video. when I move my mouse on those points I created I could not connect a line on the point like the guy did.
View 3 Replies
ADVERTISEMENT
Aug 8, 2013
Why the break at point command is different when I write it than when I click on it? I mean, when I use the command by redoing it with the spacebar or with the keyboard shortcut, the line that I want to break is not only break at a single point but from this point to the middle of the line…
View 5 Replies
View Related
Aug 1, 2012
Any command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need something that would be faster, use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and ther divide it on 4 or 3 parts.
View 5 Replies
View Related
Jul 16, 2012
Is it possible to divide a polyline into multiple segments with a certain interval?I am looking for something similar to "Measure" command.But I want to do this programmatically.
SendStringToExcute("measure ");
I need the point objects created by "measure' command in order to draw a new polyine with them.Of course, "SendStringToExcute" does not return such object collection.If you could provide me with C# (or .NET ObjectARX 2010) code snippet.
View 1 Replies
View Related
Mar 24, 2011
When dividing, say, an arc into 4 equal parts. The point showing up on the object are so small, I can't see them! How can I change the tiny dot to a "x" or "=" or anything that I read?
View 2 Replies
View Related
Jun 1, 2010
For once I have to place many asymetric objects uniformly with Alignment along a convex circular arc (2D). So I try Measure or Divide using my Block but it flips my Block so it is aligned with the inside of the curve (closest to the curve centre) not the outside and the blocks are turned upside down. If I draw an arc concave up it plots OK. If I draw a Spline (single curve or reverse curve (S curve) in my desired orientation, it also plots OK.
I have tried all combinations of UCS but to no avail. The block is not dynamic so there has not been any Alignment set.
View 9 Replies
View Related
Aug 1, 2012
do you know command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need sommething that would be faster,know is use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and then divide it on 4 or 3 parts.
View 1 Replies
View Related
Jan 5, 2013
i want to divide a helix into number of segments...for this i used divide command..but its not working..what shall i do to divide the helix..no of segments or length of segment is not important.
View 9 Replies
View Related
Jan 5, 2013
i want to divide a helix into number of segments...for this i used divide command..but its not working..what shall i do to divide the helix..no of segments or length of segment is not important..
View 2 Replies
View Related
Mar 11, 2013
How to get a divide command with in a dynamic block?
View 3 Replies
View Related
Feb 24, 2012
My work requires me to create programs for our CNC router. It is done in AutoCAD 2008. To making programs faster I've created series of dynamic blocks. I am attaching a file with one of those blocks.
The file is actually illustrating what I need to do number of times a day. I would like to make the process even faster and more fool-proof. The "old way" in file shows what my current way of creating programs. The "new way" is my attempt to make it faster.
My problem is automatically dividing a line in dynamic block into a variable number of segments that are always equal. Naturally I use divide command after I stretch and explode my dynamic block. It would be much faster if the block would be able to do it all by itself.
My attempt of solving this was to use Visibility Parameter. However, if you look closely at it, you'll notice that if I want to do it for all the possible combinations it will be extremely complicated and easy to mess up.
If only there was a way to have two visibility parameters. Then I'd make one for horizontal holes and another for vertical. Unfortunately I can't.
How to accomplish this? LISP, maybe? Unfortunately, I don't know LISP.
View 2 Replies
View Related
Apr 19, 2012
(see attached)
I have what seems like an odd, but needed request here. I have an engineer that is looking for a way to measure between two lines that are not co-planar, but he wants the measurement in a specific plane.
Basically he wants to be able to select a plane or line, then be able to select the second plane or line and have the tool automatically "project" it to the plane of the first selection and give the angle in that plane.
Ref the attached - the purple lines are in the XY plane, the blue line is not, but he wants to measure the angle from the X axis to that line but in the XY plane as seen by the green line that was manually projected to that plane.
Without having to manually create a sketch and project the entities that need to be measured (this example is an extremely simplistic one), how can this be done? Measurements in this way need to be done in numerous complex angles.
He's claiming Catia, Pro/E and of course, SW can all do this "project" within the measure tool. I figured if that's indeed the case, Inventor sure be able to.....JD, you're the resident expert on SW & Inventor....do you know what I'm referring to?
View 5 Replies
View Related
Jan 28, 2013
I have moved onto a new machine and there are 2 AC functions I need to change.
1. I used to be able to toggle between Ortho on/off by holding the SHIFT key, on this machine it doesn't activate. Is there a command for this? I know I could use F8 but my hand is over the SHIFT key when I draw so its easier to do it this way.
2. When I activate the MEASURE command AC automatically activates Dynamic Input which makes my cursor jumpy when I move it. How can I stop this from happening? To clarify, I don't want Dynamic Input on when I am in the measure command.
View 9 Replies
View Related
Apr 7, 2011
I have a 3d Drawing with very detailed light source descriptions. Is there any way I can measure a light intensity (in lux) in a specific point of my drawing?
View 0 Replies
View Related
Feb 11, 2013
I am trying to add the measure command which adds nodes / points to what I select to the tool bar and it wont let me do it when I select it out of the commands search box.
View 3 Replies
View Related
Sep 19, 2013
Inventor 2014.
When you measure something with the distance command, according to the type of file, the last zoom you did, your graphic card and probably the speed of the wind, the little red line won't show.
Normally when you measure something, a thin red line is shown were the distance is calculated. But in my laptop, and both pc's of my client, Inventor shows this line only in parts, not in assemblies. I've got a Quadro 2000M, my client got Quadro FX 1700 and 1800, all with the recommended drivers.
So I tried with 3 other laptops. On one of them (with a K2000M) if you do a measure right after the file open, it give you the line, if you zoom with the measure command open, the line disappear and won't show again until you close and open the file again. But if you zoom without the command active, the line is shown normally. But it's not working like that on all machines.
View 2 Replies
View Related
Jan 31, 2013
I'm wondering if there is a lisp possible to measure area's by pick point (as in bpoly). This little feature exists in Microstation so i was looking for something similar.
Is it also possible if this lisp can measure areas from an external reference (dwg, dxf, dgn, shp etc..)? I'm kind of new to AutoCAD in that sence.
View 2 Replies
View Related
May 9, 2012
I want to add the Measure (Distance) command to my quick access toolbar. When I right click on the Measure button the "Add to quick access toolbar" is grayed out in 2013.
Also why can't they make it so when I add something to the quick access toolbar stays added to all file types. I have to add it to .ipt, .iam, .dwg...
BTW Not real impressed with 2013 so far.
Using Inventor 2013
View 2 Replies
View Related
Nov 28, 2011
I am trying to create a lisp that prompts you to select multiple lines, and then prompts to enter a name of a block you wish to use. With that information use the measure command to place the entered block along the selected lines with the spacing set to the value in the blocks attribute.
I have a lisp that does most of this with the exception of the extracting the value of the block size to use as the distance between blocks, the current lisp just prompts for the distance.
I have a lot of blocks with different spacing so it is hard to remember the distance.
Here is the current Lisp i use:
(defun c:MEB (/ blk ss l name)
; TharwaT 04. 04. 2011
(if
[Code].....
View 9 Replies
View Related
May 7, 2013
I cant seem to get art work that I have created to open in illustrator by double clicking. I have to either tell it to open with or to drag it to the program.
View 3 Replies
View Related
Oct 27, 2013
I am doing the Inventor 2014 tutorials. In the examine, treat, and solidify the stand tutorial it says to Click the STITCH command, which I did. It then says to click the BODY selection option. There is no Body selection option in the STITCH dialog box.
View 5 Replies
View Related
May 8, 2013
i was jus using mvsetup command to rotate a view port nad not my right click won't work?
View 7 Replies
View Related
Jan 22, 2012
How can I assign the enter command to the right click in Autocad 2004?
View 4 Replies
View Related
Jan 13, 2012
I have 2010lt on Vista. Mouse is set to repeat last command on right click. When I right click to repeat break at point command, it will shorten the line every time. When I click the break at point icon it does not shorten line. I cant find a fix.
View 9 Replies
View Related
Apr 10, 2013
For some reason when I open a drawing and try to edit it, the left mouse button cancels the command.
Example;
Command: line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: *Cancel*
View 9 Replies
View Related
Feb 26, 2013
I wrote a couple of functions one of them creates a block with a Name let say "MyBlock".
I wrote a command "MyBlockEdit" where the selected block attribute data is displayed in a custom form to change some of the properties.
Now I want to add the folowing function:
When a block with the blockname "MyBlock" is doubleclicked the command "MyBlockEdit" is triggered in place of the attribute editor.
View 9 Replies
View Related
Jun 25, 2012
When I have an object selected and I want to de-select said object, I typically right-click and select "deselect all" - I have Autocad 2013 and it is telling me that this is an unknown command.
View 9 Replies
View Related
Jun 15, 2012
I am running C3D 2012
I have created a point style to flatten the points and lines I create locating buildings effortlessly. I have called the point style "no elevation" and set the 3D geometry to flatten it at zero elevation. I then created a Point key description BLDX that references the style "No Elevation". I also made a figure under my figure group for BLDX that is not a breakline.
My BLDX is still coming in at elevation as well as the corresponding figure. When I hover over the points, it shows that it is using my point style of "No Elevation".
View 2 Replies
View Related
Aug 13, 2012
I was wable to write some code that makes some already drawn objects on autocad into a selection set. What I need to do next is copy the selected objects and move them over like a distance of 50 to the right.
View 7 Replies
View Related
Dec 14, 2012
When using the mapdist command the measurement is different from the actual line that I create. The map coordinates and the maptrack coordinates match. When I open a older drawing there is not an issue. Did I somehow change the origin of my template.
Here is sample from the command line
Command: _mapdist
Specify first point:
Specify second point:
Distance = 12.7513 (Foot)
Azimuth = 38 degrees (forward), 218 degrees (reverse)
Delta X = 15.0000, Delta Y = -0.0381
View 7 Replies
View Related
May 8, 2013
right clicking the mouse normally repeats the previous command. In this case I right click to repeat the "break at point" command. Instead of getting the break at point command, I always get the "break" command.
View 2 Replies
View Related
