When I have an object selected and I want to de-select said object, I typically right-click and select "deselect all" - I have Autocad 2013 and it is telling me that this is an unknown command.
View 9 Replies
Am I missing something or has shift-drag / click for deselecting been removed from C3D 2013?
Is this a variable I can re-enable? Or is there a hotfix for this?
This is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .
I initiate a command (say LINE), I pick my first point to draw the line and nothing happens. I must click it again to get it ot work. It only happens when I'm working fast. For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again
or
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine. For instance, after initating the command simply wait about 2 or 3 seconds and then try to click. It all works fine there, but waiting becomes annoying now.
The mouse clicks work fine in all my other software (Excel, MS Word, etc.). I am having another (maybe totally unrealated issue) with my keyboard. While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad. This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.
I've been working in PS CS6 a while now and notice a consistent behavior, different from previous versions: it does not recognize the first click, after choosing a selection tool from the tool panel.
Try this:Select "Rectangular Marquee" tool, using the tool panel.Move cursor over document and click-n-drag. The tool does not work. It must be clicked a second time to work. When selecting the tool using the keyboard shortcut, this does not happen.
I just downloaded SP1 to mi Autocad Civil 3D (spanish), but now when i try to order some objects behind others it shows "Comando BACK no reconocido..." (Command BACK not recognized), i have tried to repaired the installation, reinstalled, unistalled and reinstalled, and the problem stills, so i guess it was the SP1 that change the language pack.
View 4 Replies View RelatedIf I type in refedit, wipeout, match properties, properties and quite a few others my command line reads Not Recognized! I can't live withour these comands! Not sure what I did, it happend yesterday and I was getting hit by all sides.
Added note: it doesn't seem to mater how I try to get to these commands i'm equally hosed if I use short cut, spelled out, on the ribbon, right click. . . . .access denied.
I still have use of line join edit etc.I don't know if this is related but 2012 dosn't seem to remember settings like if you check the double click to edit in options save work space after the next day it is back like it was.
I have an issue when working in paper space in an active viewport. As a quick change i want to move a few items and im zoomed in to do so. Problem is, when i select some items, then pan with the 3rd button on the mouse to select more items, it deselcts all the items i previously just selected.
Is there a fix or something i need to change in options for this? In AutoCAD 2011 there is no problem, but my upgrade to 2013 has the issue and its such a pain, i've reverted to the old program.
Since installing 2013, when I have objects selected and want to deselect them by depressing the shift key, the cursor freezes and will not move until i let go of the shift key...
View 9 Replies View RelatedI have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies View RelatedI am running 2013 Autocad and have 2 keys set up as a shortcut to Control+C for my Copy and Control+V for my Paste....Use it all the time
I have this setup on my control panel of computor keyboard and shows up on my custom files
Last week Paste Quit working....does not recognize any imput.....Copy is still there
Both work fine if using the 2012 Autocad or doing excel sheet.... or anything else
When I first installed Architecture 2013, I seem to remember having to navigate the menus to make sure that the Arial font was on the selected list of "recognized fonts" - but cant remember where this list is filed/found.
View 2 Replies View RelatedI am doing the Inventor 2014 tutorials. In the examine, treat, and solidify the stand tutorial it says to Click the STITCH command, which I did. It then says to click the BODY selection option. There is no Body selection option in the STITCH dialog box.
View 5 Replies View Relatedi was jus using mvsetup command to rotate a view port nad not my right click won't work?
View 7 Replies View RelatedHow can I assign the enter command to the right click in Autocad 2004?
View 4 Replies View RelatedI have 2010lt on Vista. Mouse is set to repeat last command on right click. When I right click to repeat break at point command, it will shorten the line every time. When I click the break at point icon it does not shorten line. I cant find a fix.
View 9 Replies View RelatedFor some reason when I open a drawing and try to edit it, the left mouse button cancels the command.
Example;
Command: line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: *Cancel*
I wrote a couple of functions one of them creates a block with a Name let say "MyBlock".
I wrote a command "MyBlockEdit" where the selected block attribute data is displayed in a custom form to change some of the properties.
Now I want to add the folowing function:
When a block with the blockname "MyBlock" is doubleclicked the command "MyBlockEdit" is triggered in place of the attribute editor.
Why the break at point command is different when I write it than when I click on it? I mean, when I use the command by redoing it with the spacebar or with the keyboard shortcut, the line that I want to break is not only break at a single point but from this point to the middle of the line…
View 5 Replies View RelatedAfter installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
If I select some objects (i.e. pipe, feature line, etc.) and right click to bring up my shortcuts, I click on SOME commands (i.e. object viewer, elevation editor, etc....respectively, the command does not progress....it forces me back to a selection box cursor and I have to reselect the object.
For example, I select a pipe, I then right click, shortcut menu pops up, I select "object viewer", and then my previous slection is not granted and it asked for a new selection (it used to always just proceed with the command), I then have to select the pipe I had previously seleted, and the command proceeds as normal.
not a bid deal, but it slowing down my productivity having to select these items twice. The wierd thing is that it is not like this with all of my right click short cut commands...only a few!?
How to use the divide and measure command , and also I knew how to change the point style. But after I used the divide command to split my object into 5 parties. I can not click the point I created.
For a instance I have a 10 meters line and I used the divide command to divide it into 5 parties, and so I have 4 points. But if i want to draw some thing on the new point my mouse could not click it.
[URL].......
I cant do what the guy did in the video. when I move my mouse on those points I created I could not connect a line on the point like the guy did.
I have my own Palette Set.
On this Palette Set I have a palette withe a tree.
On the right click of the node, I call a command (it's one of our own ObjectARX commands, but the problem is the same with a build in command).
The command wants the user to select a point, with a few options. If I first select a point (left click) and then click right, everything works fine.
But If I click with the right button, before I select anything, the menu is not shown.
The code for calling the command is really easy:
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.SendStringToExecute("_ARC
",true,false,false);
As said before... I don't call the _ARC command... but for the arc Command the right click menu is not shown also...What can I do, to get the normal behavior of the right click?
've recently noticed something uncommon when working with Photoshop CS6 under Mac OS X 10.8.x.When I naturally tried to select a Layer by the [ Command + Click ] (let's say) shortcut, it failed. This little thing was driving me nuts, and I know it must be getting some people hairless, too.
Anyway(s), by looking another read-only thread, I noticed the problem has not been solved and some pretty lame recommendations were given. By try, I finally found the solution and was able to fix this little annoyance that maybe we've all been through. downgrading to 5.5 again like I was considering:
1) In Photoshop, make sure the Move Tool is selected by pressing "V";
2) In the tool's submenu, forget about selecting/marking "Auto-Select".
3) Although, make sure "Layer" is selected right next to the "Auto-Select" button, and you should be done as I am.
I just can’t get it to work through edge, basically I have a button and I want to be able to click the button which then in turn downloads a file from the site, It’s a PDF file and I have tried the window.open() command but I get funny results once it opens? Basically I just want the button to be clicked and the file to be downloaded to the machine.
View 2 Replies View RelatedWhen I select the UCS icon and right-click, I get a right-click menu, but there is no options for UCS there. I thought it should give me options regarding the UCS and the UCS icon. Using vanilla AutoCAD 2013.
View 7 Replies View RelatedA couple of things that seem to be missing in LR4. In all previous versions of LR, I could select non contiguous folders (or collections or a mix of the two) by holding down the Command key (using a Mac). That doesn't work in LR4. Also, when I create virtual copies (which I also do all the time), the copies lose the name of the original. They are simply name "copy 1."
View 5 Replies View RelatedMy right click customization, which would bring up properties as an option, or could unlock a viewport by selecting it and right clicking. and can also select an x-ref to open, or edit in place, and modify attributes, etc.....has disappeared.
All I get now are basic pan/zoom commands, action recorder, clipboard, etc.....I checked my options, nothing has changed in my right click customization field, but for some reason, it's just not working. Any way to get that back?
is there a way to make it so that i right click on the mouse, it does the 'cancel' command??
View 7 Replies View RelatedThe answer to this post is not the pickfirst variable. I select text, a line, anything really then right click, copy and nothing it loses the selection set and waits for me to now select something. I know it sounds like pickfirst, but pickfirst is set to 1.
2013 Autocad vanilla.All service packs and updates.
Autocad 2013 closed when I click "A" symbol, "A" symbol meaning is AUTOCAD symbol at upper left corner.
one again, why licence screen didn't display after finishing install ?
