AutoCAD 2013 :: Right Click Customization Disappeared?
Jul 3, 2013
My right click customization, which would bring up properties as an option, or could unlock a viewport by selecting it and right clicking. and can also select an x-ref to open, or edit in place, and modify attributes, etc.....has disappeared.
All I get now are basic pan/zoom commands, action recorder, clipboard, etc.....I checked my options, nothing has changed in my right click customization field, but for some reason, it's just not working. Any way to get that back?
when I wanted to copy objects from one drawing to another or even inside of one drawing, I could right click, "Copy with Base Point" . In 2013 (possibly before) they moved that command along with copy, paste into another command called "Clipboard".
I've been searching for a way to customize that to remove that extra click to access a commonly used command with no luck.
When I change the User Preferences "right click customization" to "Repeat Last Command" and "ENTER" then hit "Apply & Close" it reverts back to the default settings.
So when using C3D, I have my right-click setup so that when I click on an object, say a multi-leader, surface, etc, a long menu pops up with object-specific options. Such as multi-leader styles and scales, pipe network options, etc.
So today, AutoCAD decided to be lazy and not show that menu. I've tried turning off the R-C customization, then turning it back on, switching the custom options around, applying, then setting them back to the way I had them, starting a new drawing, restarting CADD, and finally restarting my computer. NOTHING.
This has happened to me several times in the past and it just starts working properly again at some point. To draft, modifying C3D objects, without the r-c menu is such a time consuming PITA.
I have altered my CUI so when I double click on civil 3d objects it opens up their properties for quick editing. Never had a problem pre 2013 and I am sure this is something I did but am lost.
Every time I double click on any object it just opens up the properties box. It skips right over my double click customization.
In ACAD 2013, everytime I try to sync my settings to "the cloud", the pull down menu reads "Customization Syn - Error". I am signed in OK to Autodesk 360. Stand alone 64 bit installation on a single machine.
My system crashed and it apparetnly effected AutoCAD 2006 LT. All my toolbars disappeared, etc. I now have it all back the way it was except for my right-click menu is all mess up.
Regardless if an object is selected or not, the Snap Menu appears, instead of the one I was used to (that included Erase, Move, Copy Selection, Scale etc. ). How can I get that back?
I've been using ACAD LT 2013 successfully, until the message started flashing on my screen "Sync Error, A customization sync error has occurred" It does not allow me to turn it off.
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
I have a problem. When I use parametric dimensions in my existing drawing the dimension lines and arrows are there but the numbers are invisible. I can't see them. I have searched over much of the dimension style manager dialogue box and I can't find a setting that would change this (but I could have missed something). When I open a new drawing and draw a rectangle and add parametric dimensions they are visible and there doesn't seem to be a problem. What the hell is going on? (I have not used paramentric dimensions until just recently.) I am first going to the top view, with the z axis perpendicular to the page, before adding the parametric dimensions (in case that makes a difference).
I previously had a problem wherein an entire drawing I had drawn suddenly became invisible, except when the pointer was in certain places and then it was temporarily visible. But that problem was solved when I just shut down the program and computer and then restarted it all.
After just installing 2013, I decided to change the screen appearance and move the command line into its traditional area at the bottom - I over dragged and it disappeared off the screen. I have tried CTRL+9 and using the Ribbon Commands and nothing seems to work.
I have looked at the Preferences and cannot find anything to indicate the commandline or how to customize with the exception of colour and text colour!! Where it has gone and how do I get it back?
I don't know what I did but all the sudden my ribbons are gone, and after a day of research I found that I can type in RIBBON and it will appear. The only problem is I cannot find a solution docking the ribbon horizontally as it was when my program was installed.
is there a 1800 # for questions or just discussion groups?
I installed LT 2013 in November and recently have noticed that the ribbon is masked or overwritten by the banner of my web browser. This only happens when the browser is open and full-sized. If I close or downsize the browser the problem goes away.
If I hover the cursor over the ribbon area the various tools appear, sometimes individually sometimes the entire panel, but never the entire ribbon.
I am using the Windows version of LT with FusionWare on a Mac Pro. Since I only use the Windows platform for Autocad I can't say whether or not this would happen in other programs.
I'm using Autocad 2013, and the Open File Dialog Box has disappeared. Every time I try to open a drawing, it defaults to the command line. I have the same error with Image Attach. It's only my user. Other Users on the computer do not have this issue. Settings to change it.
I am having a little trouble with the paperspace in autocad 2013, I am running windows 8. As shown in the attachment the paper underlay is missing or I dont understand the new process. I want to draw viewports that fit onto the specified paper size(A1). Without the digital picture of the paper under the viewport I dont know where to draw the viewport.
Restore my Model and Layout Tabs at the bottom of the Drawing area. I went to Options/Display Tab, and under the pannel of "Layouts elements" the box of "Display Layout and Model Tabs" is checked, yet, I can't witness this diplayed. Even if I have to toggle something to make it hidden and displayed, where is the place for that? See the pictures of my settings and the Drawing area.
I went to hide the properties palette and now it disappered. I type properties in the command line and right click on an object and select properties and nothing. No palette. What do I need to do to get the palette back?
today I encountered a very disturbing problem while using AutoCad 2014. I was preparing a complex 3d model and suddenly parts started to vanish on a certain zoom. It was very irritating but the biggest prolem is that after turning it off and on again, those parts are completely missing from the model (without saving).
When copying a symbol (control c) then pasting (control v) I can move the symbol to another location and left click to drop it. Many times when I do this the symbol disappears and you can't see it. If I re (regen) the the entire model disappears. I can close out the drawing then open it back up the drawing has been restored and the symbol will be at the location that I had placed it at. With the same drawing, I don't have these problems with 2012.
When I select the UCS icon and right-click, I get a right-click menu, but there is no options for UCS there. I thought it should give me options regarding the UCS and the UCS icon. Using vanilla AutoCAD 2013.
The answer to this post is not the pickfirst variable. I select text, a line, anything really then right click, copy and nothing it loses the selection set and waits for me to now select something. I know it sounds like pickfirst, but pickfirst is set to 1.
2013 Autocad vanilla.All service packs and updates.
I have attached an image...but in 2013 we had an expanded Right Click shortcut menu...so if you clicked on a line for example it would give you alot of options...as you see in the image I do not have all those in 2014.
My "Shortcutmenu" is set to 11
Pickfirst is set to 1.
In CUI I do not see any seperate menus loaded under Shortcut.
When I go into CUI & try to customize the double click for say line & set it to bring up the properties box it works, but it changes all double click actions to do that unless there is already a default double click for a particular command. When I set the double click in the hatch command to edit the hatch (hatch box pops up) it works but it will change the line double click to do the same thing. I don't remember having this problem in 2009. I'm saving in the CUI every time I try this.
Everyone so far in the office who is using 2013 has found that intermitently but fairly often (maybe 1 in 8 attempts) when clicking on a tool button it seems to take about 3-4 goes at clicking before the command kicks in, this is with any command and there are various versions of windows and mouse hardware involved.
