I don't know what I did but all the sudden my ribbons are gone, and after a day of research I found that I can type in RIBBON and it will appear. The only problem is I cannot find a solution docking the ribbon horizontally as it was when my program was installed.
is there a 1800 # for questions or just discussion groups?
As of just a few hours ago, certain commands have disappeared from my ribbon. Example: when modifiying wall, i get no options for lines, same issue for modifiying floor shapes, i can get to the edit mode, but then i essentially have no options after that. Also, the check or the reject changes option has disaapeared.....meaning the only way out of the command is to undo. This literally has just occured within the last couple of hours. I tried resetting the ribbon, but nothing really happened exect locational changes.
View 3 Replies View RelatedI installed LT 2013 in November and recently have noticed that the ribbon is masked or overwritten by the banner of my web browser. This only happens when the browser is open and full-sized. If I close or downsize the browser the problem goes away.
If I hover the cursor over the ribbon area the various tools appear, sometimes individually sometimes the entire panel, but never the entire ribbon.
I am using the Windows version of LT with FusionWare on a Mac Pro. Since I only use the Windows platform for Autocad I can't say whether or not this would happen in other programs.
A friend updated his 2013 AutoCAD software to 2014 and now his ribbon and workspaces(custom and default) have disappeared in his 2013 version
View 9 Replies View RelatedI've been trying to incorporate my menus and toolbars into the ribbon environment. I skipped acad 09 so this hasn't been fun. I used the transfer feature in the cui environment to get everything I wanted. I go to 2d environment to check that everything is there and it appears to be there. I load my cui and I get my icons and menus but no ribbon. I have a big message that says, "The Ribbon does not have any tabs or panels currently loaded." I type ribbon to load, but nothing.
I've now messed with this enough that even with the base acad.cuix file I still don't have the ribbons.
When I click on the arrow on the Menu Line the show ribbon choice is "greyed out" How can I fix this to display ribbon when I open ACA 2010.
View 2 Replies View RelatedAll of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies View RelatedWhen I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
View 9 Replies View RelatedI have a G300 9-button mouse from Logitech and I would like to assign some frequently used commands to each button, is there any way to do this.
View 2 Replies View RelatedAny way to turn off HUD during commands? Seems to pop up right where I want to select geometry. I came across something about it for 2012 not being an option to turn it off but may be one for 2013
View 1 Replies View RelatedI am having problems with the selection commands,
Ctrl + A
Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)
My computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
View 3 Replies View RelatedHow to get a list of commands and variables in AutoCad 2013. In the past I always got that from the help files, but it seems now that I cannot find in the help files in this new version of AutoCad 2013.
View 4 Replies View RelatedI just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
View 3 Replies View RelatedI have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
AutoCAD as such runs fine.
Script (command) to make filter and then select any filter.
I have to run this operation on several files. So, needs it script.
Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
I use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 13 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE
Select objects: Specify opposite corner: 43 found
Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total
Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total
Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
I have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
As the title says, when several commands are entered very rapidly, i.e. zoom + extents (z+e), AutoCAD doesn't seem to recognise the second command. I believe there was a command that I came across a while back that adjusted the time delay between entered commands but I am unable to remember or locate it.
Any way to decrease the minimum time between entered commands?
finally I got my express tools ribbon but a lot of commands are missing....REDIR for example....
Don't tell me to reinstall AutoCAD Architcture because I already did it twice!
Don't tell my to select the acetmain.cuix by CUILOAD...because..
I also tried the menuload and the appload command but won't load every single lisp routine
from the express folder...can you imagine how many lisp routines the Express Folder has....
AutoCAD Architecture hasn't got such problems with Express Tools.....
when I tried downloading and installing this INCREMENT app from the Exchange Store. First, I can't get this to run at all. If I go into the CUI settings dialogue, I don't see this plug-in listed anywhere where it should appear. It had occurred to me that maybe the only way this app works is from the plug-in tab and not from the command line, but I'm not sure that makes any sense, either seems it should work either way, if I'm interpreting the documentation correctly. But, I cannot make my ribbon tab appear to check out my probably mistaken theory (see above). Navigating around the CUI dialogue and checking the settings for my tab, I see that it is set to "show" and there is every indication that it should appear, but there seems to be something buggy or suspicious going on with the
Control-0 (clean screen) toggle and/or the Control-9 (command line) toggle as well?I don't see how either of these would have any affect on the visibility of my tab, if they were toggled to the correct setting. I am the only person using this workstation so it's not like there is a profile issue at work here.
Acad 2013 32bit on XP Pro...I use the Ribbon as a palette.I'm creating a Dynamic Block with 3 visibility states (Plan, Front, Side).When I try to change from one visibility state to another using the Ribbon pull-down it keeps reverting back to the previous view.
To make it stick I have to use the visibility state dialogue box.
I have a problem. When I use parametric dimensions in my existing drawing the dimension lines and arrows are there but the numbers are invisible. I can't see them. I have searched over much of the dimension style manager dialogue box and I can't find a setting that would change this (but I could have missed something). When I open a new drawing and draw a rectangle and add parametric dimensions they are visible and there doesn't seem to be a problem. What the hell is going on? (I have not used paramentric dimensions until just recently.) I am first going to the top view, with the z axis perpendicular to the page, before adding the parametric dimensions (in case that makes a difference).
I previously had a problem wherein an entire drawing I had drawn suddenly became invisible, except when the pointer was in certain places and then it was temporarily visible. But that problem was solved when I just shut down the program and computer and then restarted it all.
My right click customization, which would bring up properties as an option, or could unlock a viewport by selecting it and right clicking. and can also select an x-ref to open, or edit in place, and modify attributes, etc.....has disappeared.
All I get now are basic pan/zoom commands, action recorder, clipboard, etc.....I checked my options, nothing has changed in my right click customization field, but for some reason, it's just not working. Any way to get that back?
After just installing 2013, I decided to change the screen appearance and move the command line into its traditional area at the bottom - I over dragged and it disappeared off the screen. I have tried CTRL+9 and using the Ribbon Commands and nothing seems to work.
I have looked at the Preferences and cannot find anything to indicate the commandline or how to customize with the exception of colour and text colour!! Where it has gone and how do I get it back?
My drawing just dissappeared while I was still working on it and when I try to recover the drawing file shows a blank page, I'm using an AutoCad 2013
View 3 Replies View RelatedWhat is a "Fold Panel" in the Ribbon. I can't find any information on it in the documentation?
View 3 Replies View RelatedI need to create a section of a 3d model. Unfortuntaly the layout tab I need is missing. Normally if somthing is missing I type 'CUI' and then click Ribbon>Tabs> select the one I want and drag it to 'Workspaces Contents' - 'Ribbon Tabs'
The ribbon tab for layout is missing from the cui. See attached images.
How can I get the Layout Ribbon Tab back quickly?
Tutorial I am trying to follow; [URL] .......
Can I disable ribbon in 2013?
View 1 Replies View RelatedWhen I installed AutoCAD 2013 in our labs here at Joliet Junior College I must have selected (or deselected rather) some of the components that enable the online Autodesk 360 features. When I look in our OPTIONS dialog box I do not have the ONLINE tab and ALL items/panels in the ONLINE Tab of the Ribbon are grayed out and disabled?
How do I go about patching/repairing the workstations to we can access the online settings and features?
