I have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
AutoCAD as such runs fine.
Working in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
Any way to transform/rubbersheet a photo/raster so it sticks to a wall i.e. vertically and not just doing it 2D. Trying to digitise photo's taken of walls to work in a 3d model.
View 3 Replies View RelatedI am not seeing a oe for raster design for Map 3D 2011. We need to attach ECW ortho images.
View 2 Replies View RelatedI've been trying to update a client menu and I've gotten most things figured out. They have a fairly elaborate routine set up to make sure our drawings work with their document control system as well as raster design. We are using AutoCAD 2011 and the menu's were meant for 2008.
Everything seems to run well except at this sub module and every time I load a raster drawing with a TIF the routine error's out at the line in Red below. I've tried everything I can think of to keep the routine running, and I want to refrain from just remarking it out, which seems to do the trick, but I do not want to do that unless it's for some other purpose. I just need to get their menus to work on newer versions of AutoCAD.
Private Sub AcadApp_EndOpen(ByVal FileName As String)
Dim sPathPart As String
Dim sFilePart As String
Dim sExtPart As String
Dim lResult As Long
Dim vResult As Variant
Dim bFoundCO As Boolean
[Code] ......
Is there a way to permanently attach a raster to a .dwg? I want to publish a large set of drawings on our Intranet and some have rasters attached.
I don't need to worry about links to references and how to post them so as not to break the link.
inserting a Tiff image into a dwg file with Raster Design 2011. I have a image scanned at 400dpi and the image is a good quality image, some of the text is small be legible. When I insert the image with the imageattch command the image seems to gain pixels therefore causing some text to become unreadable. I've used the bitonal filter but then I lose some resolution. Is it normal for the TIFF image to appear more dense when brought into an Autocad drawing? If so is there a way to adjust the image to look more like the scan?
View 1 Replies View RelatedAfter installing Update 2.1 for Civil 3D, Raster doesn't seem to be working. When I go to use a Raster function, I get
FATAL ERROR: Unhandled Access Violation Reading 0x01b8 Exception at 6e545df5h.
I've tried repairing and re-installing Raster and nothing has changed.
I've been trying to get the Raster Design Object Enabler for Civil 3D 2011 64 Bit to install, but every time I run the exe it says there is no target application to be found, even though Civil 3D 2011 64 Bit is quite clearly installed on the machine.
View 8 Replies View RelatedI am in the process of creating 2 lisp routines, one that loads Support file search paths on the network and one that adds support file search path locally. Each routine will be run depending on the ability of ACAD to find a file on the server. I noticed that when I add the new directories the default AutoCAD folders get replaced. I researched this and found that using the SETENV and ACAD I can include the default support paths.
The issue I am running into is that not all default folders are being added to AutoCAD when I used the ACAD variable. A plugin folder under Program Data is listed in the original install, but it is not listed when I add my directories and used the ACAD variable to add the default directories. The same thing happens when raster design is installed. The help folder and the install directory for raster are not carried over when using the ACAD variable.
I am attaching the coding for the lisp routine adding server paths. Is there some syntax I can add to tell it to append to the list instead of replacing the SFSP list?
(vl-load-com)
(setq files (vla-get-files
(vla-get-preferences (vlax-get-acad-object))
)
)
(setq SERVNM (getenv "servername"))
(setq SLSERV (STRCAT "\\" SERVNM))
[code].........
I am unable to use pull down menu commands, for example when I want to save as, I have to type it manually in the command menu...to open a file I have to type the file name at command line..
when I click save as or any other command from the pull down menu, it does not work, the command line apprars at the buttom of the drawing asking me to manually make an imput...
I have a drawing that refuses to plot the raster image when i plot to a PDF. It will plot the raster when I send it to the plotter. The raster is visible in the print preview. I've tried using the Adobe PDF driver and the DWG to PDF.pc3.
All I get is the line work.
Plot tranparency is off. Image is at Brightness 50, Contrast 50, Fade 0.
Autocad Map3d 2013
How many raster images can I add to an AutoCAD drawing?
Is there a limit? If so what is this limit and how can I change it?
My boss has been having problems with some drawings containing Raster Images, they display on every workstation besides his.
The saved path is correct but the images all list 'Unreferenced' as their status, I've tried reloading them and even detaching before reinserting them but to no avail. He is running Autocad 2013 (SP2 installed).
Also, he's had this problem for awhile now but it's happening on his brand new pc too, which suggests a possible network problem? He's on the same wireless network as half of our office but he's the only one experiencing this issue.
I am having some problem with plotting Raster image.
From time to time I need to use raster image as a background such as the example in the attachment. Here you can see that the raster image is only plotting half of the image.
When I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
View 9 Replies View RelatedInsert a Raster Image or an OLE object (like a selection from a XLS worksheet).
Explode the Raster Image/OLE object.
=> the Raster Image/OLE dissapears and the frame remains (LINE objects).
I think that these types of entities should not allow exploding.
I have a G300 9-button mouse from Logitech and I would like to assign some frequently used commands to each button, is there any way to do this.
View 2 Replies View RelatedAny way to turn off HUD during commands? Seems to pop up right where I want to select geometry. I came across something about it for 2012 not being an option to turn it off but may be one for 2013
View 1 Replies View RelatedI don't know what I did but all the sudden my ribbons are gone, and after a day of research I found that I can type in RIBBON and it will appear. The only problem is I cannot find a solution docking the ribbon horizontally as it was when my program was installed.
is there a 1800 # for questions or just discussion groups?
I am having problems with the selection commands,
Ctrl + A
Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)
My computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
View 3 Replies View RelatedHow to get a list of commands and variables in AutoCad 2013. In the past I always got that from the help files, but it seems now that I cannot find in the help files in this new version of AutoCad 2013.
View 4 Replies View RelatedHow do I accurately set the scale on a raster underlay based on 2 (or more) points where I know the distance between them?
In fact I would like to do this on 2 axes separately so that it stretches.
I am used to georeferenceing like this and getting raster underlays the right shape for the coordinate system I am using. How I can do this in AutoCAD, which used a very simple coordinate system.
I just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
View 3 Replies View RelatedScript (command) to make filter and then select any filter.
I have to run this operation on several files. So, needs it script.
I'm unable to create layers with GIMP. The program acts like the layers commands are disabled. Don't know whether it's relevant, but GIMP works normally on my XP machine. I'm unable to make layers from the program on my Vista machine, and I do not see settings or preferences for layers.
View 1 Replies View RelatedIs there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
I use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 13 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE
Select objects: Specify opposite corner: 43 found
Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total
Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total
Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
I have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
As the title says, when several commands are entered very rapidly, i.e. zoom + extents (z+e), AutoCAD doesn't seem to recognise the second command. I believe there was a command that I came across a while back that adjusted the time delay between entered commands but I am unable to remember or locate it.
Any way to decrease the minimum time between entered commands?
