AutoCAD Inventor :: 2013 Disable HUD During Commands
Jun 29, 2012
Any way to turn off HUD during commands? Seems to pop up right where I want to select geometry. I came across something about it for 2012 not being an option to turn it off but may be one for 2013
When I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
I don't know what I did but all the sudden my ribbons are gone, and after a day of research I found that I can type in RIBBON and it will appear. The only problem is I cannot find a solution docking the ribbon horizontally as it was when my program was installed.
is there a 1800 # for questions or just discussion groups?
Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)
My computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
How to get a list of commands and variables in AutoCad 2013. In the past I always got that from the help files, but it seems now that I cannot find in the help files in this new version of AutoCad 2013.
I just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
I have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013 HP Z210 Workstation Intel Xeon CPU E31240 @ 3.30 Hz 12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
I use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH Select objects to stretch by crossing-window or crossing-polygon... Select objects: Specify opposite corner: 13 found Select objects: Specify base point or [Displacement] <Displacement>: Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE Select objects: Specify opposite corner: 43 found Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total Select objects: Specify base point or [Displacement] <Displacement>: Specify displacement <0'-0", 0'-0", 0'-0">:
I have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
As the title says, when several commands are entered very rapidly, i.e. zoom + extents (z+e), AutoCAD doesn't seem to recognise the second command. I believe there was a command that I came across a while back that adjusted the time delay between entered commands but I am unable to remember or locate it.
Any way to decrease the minimum time between entered commands?
I recently installed AutoCAD 2014.When I open it a Design Feed palette comes up. (see attached image)I would like to disable this feature and not have the palette come up.
i set up the w key in my pgp file for a shortcut for wblocking (i only have 1 pgp file on my work station) it saved fine however, when i press the W key i get the workspace dialog box not a wblock dialog box any clue as to why the pgp file shortcut isnt working loading and how can i disable or change the workspace dialog from the W key
My customer is using autocad 2014 and find that sometime when he draw a line and select it, the properties show that there is a data in the delta Z value field, this cause confusion to customer since the length calculation is included the Z value, customer doesn't want the length calculate in 3D, my question is how to disable the delta Z value?
note that I am not looking for how to flatten existing drawing, I am looking for how to set the Z value default =0
AutoCad sticking on commands like copy selection and move tool, It is running very slow and when saving it says there is no system memory, although my Computer has pleanty of memory (the local disk has over 200GB space)
PC has correct specification for AutoCad 13, and I have never had problems until this morning-
Any registry setting (or some othere way) to disable Autodesk 360. My users have no reason to use this feature and I don't want them wasting time with it.
If it would be possible to disable the hatch previewing in AutoCad 2013 when you are creating it by clicking internal points, because it makes really slow the hatching work for my machine and sometimes i have to close AutoCad because it freezes.
The double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?
We will alter the Arch Base CAD file layer colors to a muted color for use as our backgorounds. We would sort the Layers by color, so that we could group them together to one base color, so basically layer colors 10-19 would then become 19, 20-29 would be 29, layer colors 30-39 would be 39, etc... If the colors were one of the 9 Base Colors (Red, Yellow, Green...) Red is effectivly the same as color as 10, so then we would make it 19, etc...
In 2007, even thought the sorting was by layer color, the layers rows would remain in the same location until we applied the changes. But in 2013, if we sort by color then alter the color, the layer row will automatically be re-sorted to its proper position in comparison to all other colors. OK I get that, but, if we are altering 40, 50, 60 layer colors, that auto re-sorting is annoying, because then we need to rescroll to our last location to continue.
So, is there a way to turn off the re-sort until we APPLY the colors.
Is there currently any way to integrate voice commands into Inventor? It would be an incredible time saver. Software such as Dragon Naturally Speaking and IBM ViaVoice offer this technology for some Windows applications. I was just wondering if it could be applied to Inventor? If not, can we expect something for R12?
how to Run Commands Using the API. And he also shows API can provide one sets of input to the command.
In my case, the Inventor command "analyze interference" need two sets of inputs. I tried to feed the commands with two selectset input throght API (see attached code). But the command looks like only take one set of them.So the behavior is not what I want.
So if it is possible, how to provide 2 set of pre-defined input to inventor commands throught API?
I have been using the ordinate set command to place set dimensions on an Inventor drawing in version 2012, I was looking for a similar way to rapidly add dimensions for hole diameters .