AutoCAD 2013 :: Script (Commands) To Make Filter?
Jun 14, 2012Script (command) to make filter and then select any filter.
I have to run this operation on several files. So, needs it script.
ADVERTISEMENT
AutoCAD Civil 3D :: Layer Filter Commands?
Feb 8, 2013I have been working on an extensive template and wanted to add some layer filters too it. I was wondering if there was a list anywhere that outlines what different characters mean to the fillter? What I mean is... I know that ~*|* excludes xfref layers because ~ means 'not' and * means "anything" and | is the character we are looking for. But what are all the other things that filters understand?
View 2 Replies View RelatedAutoCAD 2013 :: Commands Are Not Working
Apr 11, 2013When I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
View 9 Replies View RelatedAutoCAD 2010 :: Modify Commands Make Objects Choppy
Mar 30, 2012When i'm using the modify commands, the objects that I'm modifying become choppy, and when I zoom in and out with the third button/wheel, the movement of the zoom isn't fluid like it normally is, also It is extremely hard to grab an osnap during this process.
View 2 Replies View RelatedAutoCAD 2013 :: Assign Mouse Commands
Aug 21, 2013I have a G300 9-button mouse from Logitech and I would like to assign some frequently used commands to each button, is there any way to do this.
View 2 Replies View RelatedAutoCAD Inventor :: 2013 Disable HUD During Commands
Jun 29, 2012Any way to turn off HUD during commands? Seems to pop up right where I want to select geometry. I came across something about it for 2012 not being an option to turn it off but may be one for 2013
View 1 Replies View RelatedAutoCAD 2013 :: Ribbon Commands Disappeared?
Apr 29, 2013I don't know what I did but all the sudden my ribbons are gone, and after a day of research I found that I can type in RIBBON and it will appear. The only problem is I cannot find a solution docking the ribbon horizontally as it was when my program was installed.
is there a 1800 # for questions or just discussion groups?
AutoCAD 2013 :: Selection Commands Not Working
May 8, 2012I am having problems with the selection commands,
Ctrl + A
Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)
AutoCAD 2013 :: Computer Freezes Between Commands
Oct 3, 2012My computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
View 3 Replies View RelatedAutoCad :: Get List Of Commands And Variables In 2013?
Dec 28, 2012How to get a list of commands and variables in AutoCad 2013. In the past I always got that from the help files, but it seems now that I cannot find in the help files in this new version of AutoCad 2013.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Make Different Start Points For Different Commands
Jun 29, 2013My first lisp, so bring it hard on me I want to be an expert in autolisp .
My lisp is meant to do the following:
draw a rectangle with ”0” fillet. It can be done either via rectangle command, or pline command. The attached lisp has the variant with the pline-case.
The, I need to draw inside a smaller rectangle, with a fillet value, that is promoted and indicated by the user. The smaller rectangle must be centered inside the bigger one. I thought it was a good idea, to take one insertion-point for the bigger rectangle.
and to calculate a 2-nd insertion-point for the smaller rectangle, via "polar" function.
What I get:
the 2-nd insertion point is put the same as the 1-st one.
I wish to draw the bigger rectangle with one layer "example: Layer 1", and the smaller rectangle with another layer "example: Layer 2".
AutoCAD 2013 :: Buttons Returning Unknown Commands
Oct 1, 2012I just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
View 3 Replies View RelatedAutoCAD 2013 :: Unable To Run Any Of Raster Design Commands
Nov 6, 2012I have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
AutoCAD as such runs fine.
AutoCAD Civil 3D :: 2013 Hundreds Of Group Commands In Undo?
Mar 14, 2013Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
AutoCAD 2013 :: Move / Copy / Stretch Commands With Snapping?
Jul 19, 2013I use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 13 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE
Select objects: Specify opposite corner: 43 found
Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total
Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total
Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
AutoCAD 2013 :: Express Tools Loaded But None Of Commands Working
Feb 20, 2013I have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
AutoCAD 2013 :: 2014 Not Recognizing Commands Entered Quickly?
Aug 14, 2013As the title says, when several commands are entered very rapidly, i.e. zoom + extents (z+e), AutoCAD doesn't seem to recognise the second command. I believe there was a command that I came across a while back that adjusted the time delay between entered commands but I am unable to remember or locate it.
Any way to decrease the minimum time between entered commands?
AutoCAD Architecture :: 2013 Express Tools Missing Commands
May 6, 2013finally I got my express tools ribbon but a lot of commands are missing....REDIR for example....
Don't tell me to reinstall AutoCAD Architcture because I already did it twice!
Don't tell my to select the acetmain.cuix by CUILOAD...because..
I also tried the menuload and the appload command but won't load every single lisp routine
from the express folder...can you imagine how many lisp routines the Express Folder has....
AutoCAD Architecture hasn't got such problems with Express Tools.....
AutoCAD 2013 :: Programme Running Very Slowly Sticking On Commands And Error Saving
Feb 21, 2013AutoCad sticking on commands like copy selection and move tool, It is running very slow and when saving it says there is no system memory, although my Computer has pleanty of memory (the local disk has over 200GB space)
PC has correct specification for AutoCad 13, and I have never had problems until this morning-
AutoCAD 2013 :: Commands Only Work In Inches - Not Feet / Inches
Mar 20, 2013Out of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View RelatedAutoCAD 2013 :: New Group Filter
Oct 29, 2013I've been using AutoCAD since R14 and I've never had this problem. Recently installed 2013 as we upgraded from 2012 and started using a license server instead standalone licenses.
I like to setup a specific Group Filter (among others) that has my most used layers (for example centerline layer, hidden layer, paper layer, etc.). I create the Group Filter and label it "EN Layers" (Entertainment Layers). I then populate it with the aforementioned layers and layer "0". Now if I want to create a whole new layer and have it be part of the group filter (EN Layers), I used to be able to select the "New Layer" button in the "Layers Property Manager", have it create the new layer in the currently selected group filter, rename the layer and it would appear in the group filter.
As of recently, when I create the new layer in the group filter and rename it, I can see the name as I type it, but when I hit enter to save the name, it defaults back to Layer1 and saves the name as that. If I immediately create another layer inside of the group filter and rename it and press enter, both layers are updated with the names I typed. It seems like the "Layer Properties Manager" isn't refreshing fast enough.
AutoCAD LT :: 2013 Layer Filter
Apr 6, 2012Just upgraded to LT13 from LT12 and noticed that the layer filters don't change the list of layers in the manager. for example if I click on an xref'd drawing in the filter tree in past versions only the layers in that drawing would be visible. In 13 all layers are still visible. Is there a setting in this version I am unaware of?
I'm sure this is the first of several "quirks" I will discover with the new version that I will most assuredly ascribe to a step backwards in functionality in the interest of pushing out a new piece of software. How many days before the first service pack is available?
AutoCAD 2013 :: Layer Filter From One Drawing To Another?
Jun 5, 2012How to bring Layer filter from one drawing to another drawing?
View 1 Replies View RelatedAutoCAD 2013 :: Layer Filter Not Filtering
Jan 16, 2013I'm having issues with Civ3d 2013. I pushed off upgrading because of the format change and the service pack release. I was hoping little glitches would be fixed.Here are the a couple of glitches to date that I saw no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I don't want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipe outs don't work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
another complaint that doesn't have anything to do with AutoCAD, but since I'm venting... we just got a KIP 7100 printer/scanner. WORST printer/scanner we've ever had. Period. Getting the right driver, then getting the driver to produce good drawings to the correct paper size was ridiculous, and the gray shades still look like we're using a big dot matrix printer. Scanning is the most painful thing; compared to the Xerox 6204 we gave up, the quality is poor and PDF file sizes are huge.
AutoCAD Civil 3D :: How To Make Selection Set Filter For Cogo Points (DXF Codes)
Oct 10, 2013I was wondering how to develop a Selection Set Filter that will select only Cogo Points? I know I need to use Dxf.Start as the code, but then what's the string associated with Cogo Points? Can't find any documentation on this or any Civil 3D-unique entities...I know Line is just "Line" and "Arc" is just arc...but Polyline is the unintuitive "LWPolyline" and "Cogo Point" isn't working.
View 5 Replies View RelatedAutoCAD 2013 :: Show Combo Box To Activate Layer Filter
Mar 13, 2013It could be interesting to activate a layer filter from a combobox (I'd like to have this combo into the layers panel) in order to have fast access to the layers beginning to this filter.
View 3 Replies View RelatedPhotoshop :: Make Filter On Picture
Oct 23, 2013make this filter on the picture? The left side pic is the normal one and the right side pic is the filtered one by the way, this filter is called "instant" if you have iphone with new iOS7 (you will find the filter in camera or while editing pic from photo)
filter makes pic a bit sharper, yellowish a bit with keeping the textures of the pic..i tried to play with levels and brightness but couldn't really get it..if you have iphone with iOS7 you might wanna take pic and try the effect to see how it changes the pic.
GIMP :: How To Make A Basic Color Filter
Nov 1, 2011I want to make a basic color filter over my image that, for instance, filters out every color that isn't red. so everything that was red would show up as normal and everything that was blue or green would show up as black.
How do I do that in gimp?
Revit :: Filter The Selection And Make It As View Template?
Jun 19, 2012Is it possible to filter a selection (6 categories checked instead of 10) and make it as a view template?
So that next time I open up this view, only these 6 categories checked in the filter instead of re-doing the filtering again?
AutoCAD 2013 :: Can't Make Ribbon Tab Appear
Oct 16, 2012when I tried downloading and installing this INCREMENT app from the Exchange Store. First, I can't get this to run at all. If I go into the CUI settings dialogue, I don't see this plug-in listed anywhere where it should appear. It had occurred to me that maybe the only way this app works is from the plug-in tab and not from the command line, but I'm not sure that makes any sense, either seems it should work either way, if I'm interpreting the documentation correctly. But, I cannot make my ribbon tab appear to check out my probably mistaken theory (see above). Navigating around the CUI dialogue and checking the settings for my tab, I see that it is set to "show" and there is every indication that it should appear, but there seems to be something buggy or suspicious going on with the
Control-0 (clean screen) toggle and/or the Control-9 (command line) toggle as well?I don't see how either of these would have any affect on the visibility of my tab, if they were toggled to the correct setting. I am the only person using this workstation so it's not like there is a profile issue at work here.
AutoCAD LT :: 2013 - Can't Make Changes To Drawing
Oct 11, 2012I have cad drawings but when I select to change a desk in the floor space the whole floor highlights - what can I do to stop that and select only what i want to delete add
View 3 Replies View Related