When i'm using the modify commands, the objects that I'm modifying become choppy, and when I zoom in and out with the third button/wheel, the movement of the zoom isn't fluid like it normally is, also It is extremely hard to grab an osnap during this process.
View 2 Replies
I want to extract 3 different variable strings based on one large string such as:
"2013_ARCH-Lev01.dwg" <or "2014_STRC-Lev00-BM">
and the 3 variables are:
Dim YEAR As String
Dim TRADE As String
Dim LEVEL As String
YEAR = 2013 <or 2014>
TRADE = ARCH <or STRC>
LEVEL = 01 <or 00-BM>
I was thinking of using the first four digits "(0,1,2,3)" for YEAR?
using the next four digits following the underscore "_(0,1,2,3)" for TRADE?
using the rest of the digits following the dash "-(unknown)" for LEVEL?
In PS CS5 Extended latest version. I select all, then go to Select|Modify, and all choices are grayed out other than border. This is an 8 bit RGB image. The layer is selected. I also tried flattening it. I also tried creating a new image, RGB 8 bit depth. Also 16 bit. Nothing works.
I double checked CS3 and this works in CS3, but not CS5.
I am creating a selection set using ssget...
Then I copy that selection set multiple times in a loop. What I would like to do is then rotate (or otherwise modify) the last copied group of items. If I rotate "last" it will only accept the last drawn item, so only one item in the group of copied objects will rotate.
Here is the portion of simple code I am using right now (it's in a loop so all variables with 'Next' are changing each time):
(command "_.copy" SS1 "" SS1Base NextPT)
(command "_.Rotate" "l" "" NextPT NextAng)
This works fine with a single object, but I can't figure out how to call up the entire group of objects.
Civil 3D 2011
Windows 7 x64
Script (command) to make filter and then select any filter.
I have to run this operation on several files. So, needs it script.
I've just installed ACA 2010 on my laptop on Windows XP64 bit
When I select a command such as the wall or door command. The command starts then exits out before I can draw anything.
It seems that the 'combine zoom and pan commands' option doesn't work correctly. Let's say it doesn't react as i am used to in previous version. now i have to do the undo command or 'ctrl z' many times before i am back at the point where i want to go. I using the middle mouse button often to zoom in and out, and for panning. but now there are a lot of steps to undo if you want to go back.
I tried to switch of and on this option in the options dialog but no difference.
An older gentleman at our company is very much used to having F12 as endpoint, F11 as intersection and F10 as dist. Now that I've upgraded him to 2011, his life is pretty much ruined.
No matter what I try, I can't get the temporary override buttons to work. F10 always does POLAR, F11 always does OTRACK and F12 always does DYN.
How can I kill AutoCAD's default behavior and implement what he wants done?
I have autocad 2011 and commands not working. I reinstall autocad but command not working.
View 2 Replies View RelatedLock/unlock commands have three major problems! No “window selection” to select the layers required to be locked in one go. For example, the “isolate” tool works fine with window selection! In principle, I have no idea about the philosophy beyond which some commands are banned from “window selection!No BUILT-IN icon to Lock All or Unlock All (sure, we can customize it but I’m talking about having this command as built-in)The AutoCAD doesn’t give an alert if a command is applied in the location where particular layers are looked. For example, in many cases, we get into trouble as we move particular objects to discover later that some of the objects were locked! That’s fine, but the AutoCAD should give warnings in case a command is applied where some layers are locked.
View 3 Replies View RelatedHow to print the abbreviations of the commands?
I tried to print all the abbreviation of the commands but couldn’t know how can I do that.
I tried File>Print (as shown in the screenshot), but didn’t work
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I recently downloaded in my new computer the version of autocad 2011, but when I type letters for the command list to show, it doesnt!
View 1 Replies View RelatedJust recently I have really started to develop LISP routines and I am curious if it is possible to integrate them with a Keyboard call-out.
View 9 Replies View RelatedI've just encountered strange issue and I cannot find the proper solution anywhere.I work in AutoCAD for 5 years and I am used to type commands on the keyboard (I usualy don't use icons in AutoCAD).
I was used to...just cancel all previous commands by ESC key and start typing the command.But since last week I had to click in the command line to write the command in it. How to type commands without annoying clicking in command line?
Just got AutoCad 2012. Commands like Mirror and Copy which involve duplication (no problem with Move or Rotate, for example) will cause AutoCad to not respond for a few minutes. I believe it only is an issue with files brought forward from AutoCad 2000.
View 6 Replies View RelatedI created a command that I no longer use. I actually made a spelling error upon creating it "SUPECLOSE" and I want to delete it.
This is how I created this command: I typed in ALIASEDIT in order to add a new alias to a command.
I then clicked on the "Add" button.
In the "Alias:" field, I typed in "xx"
And in the "AutoCAD Command:" field, I typed in "SUPECLOSE" - which isn't actually an autoCAD command. "SUPERCLOSE" is the command I use to run a custom LISP routine that I created. Upon hitting pressing "OK" to this, AutoCAD prompted me with: "'SUPECLOSE' is a new command, Do you want to add this to your list of commands?"
I said yes. And then shortly afterwards realized the spelling error I had made. Problem is...I don't know how to access this list and delete the new command that I had just created (which does nothing).
We are working in AutoCAD 2010 and the keyboard shortcut commands are not working for one of our users. we are having difficulty getting it back online for her. we tried a menu load for the acad.pgp file and it isn't working .
View 2 Replies View RelatedIs there a list of obsolete commands / variables AutoCAD 2012?
AutoCAD Commands, variables, LISP commands, LISP variables?
My first lisp, so bring it hard on me I want to be an expert in autolisp .
My lisp is meant to do the following:
draw a rectangle with ”0” fillet. It can be done either via rectangle command, or pline command. The attached lisp has the variant with the pline-case.
The, I need to draw inside a smaller rectangle, with a fillet value, that is promoted and indicated by the user. The smaller rectangle must be centered inside the bigger one. I thought it was a good idea, to take one insertion-point for the bigger rectangle.
and to calculate a 2-nd insertion-point for the smaller rectangle, via "polar" function.
What I get:
the 2-nd insertion point is put the same as the 1-st one.
I wish to draw the bigger rectangle with one layer "example: Layer 1", and the smaller rectangle with another layer "example: Layer 2".
How to modify the settings of more than one layout in one go?
I wanted to choose the same printer for many layouts but I found out that I need to modify them one by one.
Some of these layouts have “Adobe pdf converter”, others have the “DWG TO PDF.pc3”. What I need is to set the printer “DWG TO PDF.pc3” for all the layouts in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
When working in a paperspace layout I am not able to move or re-size the default viewport. Upon selecting the viewport and attempting to move it I receive the following command line message: "1 was not in the working set." The viewport appears to be fixed and non-editible. What does the message mean? Would putting the viewport in the working set make it editable, and if so, how is this done?
View 2 Replies View Relatedthere is already a style set from the file i'm using, when i am trying to get the measurements from the line to show up, they aren't doing so. how do i get it to show the lines when i modify the text and make it become visible?
View 3 Replies View RelatedThe problem is that AutoCAD 2010, does not recognize any object snap commands, all the other comands work just fine.
I have reinstalled the program and don´t work.
What could be?
We've upgraded to 2012 and have noticed a problem when fast clicking on the mouse when using commands.
For example when using the erase command I would usually type E and then quickly right click and left click. However in 2012 it brings up random command instead of erase i.e. sheetset, publish, ucs etc..Bringing up the text window afterwards it shows
Command: e
ERASE
Select objects: Specify opposite corner: *Cancel*
0 found
Select objects: *Cancel*
Command: _PointCloudIndex
The right click and left click are only processed once.This happens on all commands typed on the command line not just erase
Having only recently started using Autocad 2012 (I mainly used various versions of LT over the last 10+ years) I have noticed a few strange goings on.
It doesn't happen all the time but sometimes whilst in a command ("move" for example), when I go to click on an object or pull a window, a separate, totally random command activates itself. Why this happens, I just hit escape a couple of times & continue what I was doing.
I'm not sure if it is a case of me, in my haste, missing my intended object & hitting the right click button (which I use as a return & not a drop down menu).
How do I turn on the dialog boxes when I enter commands? I finally found HPDLGMODE for the hatch command, but I would like it for all commands, especially array.
I have my FILEDIA set to 1.
Using ACAD2013, any command I try to execute requires two clicks. This specifically occurs with transformational commands - i.e. offset, rotate, mirror, but not line. For example I will enter the "OFFSET" command and hit enter, however instead of prompting me to input my OFFSET variables I will have to hit enter again and then enter the requisite variables. In effect I have to hit enter twice to execute any command of this sort. I have already tried changing my PICKFIRST settings, and AUTOCOMPLETE. I'm at a loss.
View 9 Replies View RelatedWhy are my edit commands (copy and cut) grayed out / unavailable? When trying to copy a selected layer or object, all my editing commands are grayed out and unavailable. Even if I convert something to a smart object, no joy. The only thing I seem to be able to select and copy/cut/paste is text in the text edit mode. makes no sense and is rendering PS unusable.
View 5 Replies View Relatedi have already made the pattern in 3d, but its made up of a whole bunch of different objects, what i need to do is to join them all together to make a seamless one piece. i read through the tutorials, the explain that i have to select all the objects that need joining, then click the "join" button under the modify tab. I did this but still see the seams.
View 9 Replies View RelatedUsing Civil 3D release 2102 on a 64bit Win7 capable Dell Precision, everything up to date.
I have a table created from a datalink using TABLE command. I want to have it use a fill color of 255 in order to mask the objects behind it. I cannot seem to modify the table style, and using fill in Excel doesn't seem to the affect Autocad table.
As you know, when I create a table from a datalink I am not allowed to choose which style.
I don't like using wipeouts to provide a background mask, because they never seem to work when plotting from paper space.
How I can apply fill to the table, or otherwise mask the pbjects behind the table?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
I have inserted an XREF with annotative blocks. The blocks in the original drawing are 1:1. In the new drawing I want to plot the XREF at 1:250. How do I set the annotative scale to the blocks with out adding scales to the original drawing?
View 1 Replies View Related
