How do I turn on the dialog boxes when I enter commands? I finally found HPDLGMODE for the hatch command, but I would like it for all commands, especially array.
I have my FILEDIA set to 1.
Using ACAD2013, any command I try to execute requires two clicks. This specifically occurs with transformational commands - i.e. offset, rotate, mirror, but not line. For example I will enter the "OFFSET" command and hit enter, however instead of prompting me to input my OFFSET variables I will have to hit enter again and then enter the requisite variables. In effect I have to hit enter twice to execute any command of this sort. I have already tried changing my PICKFIRST settings, and AUTOCOMPLETE. I'm at a loss.
View 9 Replies View RelatedWhen opening AutoCAD 2010, I get an error message "Unable to load profile...". This happened unexplicably. I have been using AutoCAD several months with no problems. One annoying consequence is that dialog boxes do not display. For example, running DIMSTYLE does not open the Dimension Style dialog box; instead, a list of options such as ANnotative, Save, and Restore appears. How do I get back to normal?
View 1 Replies View RelatedI have several lisp routines I have been using since Acad 2002 (with occasional minor revisions) for my title blocks that open up a dialog boxes. None of the lisps I have that should open up a dialog box are working in a fresh 2012 install.
The lisps work in 2010 but not in 2012. I searched through the boards and found some info but it hasn't worked (made sure ATTREQ & ATTDIA set to 1).
Here is one the lisps in question:
(defun c:title(/ archl sqftl filel datel salel namel builderl planl subdivision1l subdivision2l plana planb year month day rb1 rb2 rb3 insp1)
(setvar "cmdecho" 1)
(command "attdia" "0")
(command "-osnap" "none")
(setq dcl_id (load_dialog "tools.dcl"))
[code]...........
I have tried changing the attdia value to 1 in the lisp but the result is the same. The command fails at the same spot:
Command: TITLE attdia Enter new value for ATTDIA <1>: 0
Command: -osnap Enter list of object snap modes: none
Command: nil
If I use -insert I can get the blocks to run by typing all the information at the command line but I want my dialog boxes back!
I cannot get dialog boxes for purge, xref, etc. I only get the command line.
I made sure filedia=1 and cmddia=1.
The tilde ~ key will not bring up the dialog box from the command line.
My AutoCAD has started doing something different, I don't remember turning it on, and now I can't figure out how to turn it off.
What happens is when I hover the mouse near two or more objects a little blue box icon appears telling me that there is multiple objects there. Then, if I click, it asks me which object I want to select. URL....
I got a user who uses AutoCAD 2013 LT. He is not able to draw lines, type commands, select objects etc, in new and in existing documents (that other users can edit). I have reset the default settings and did a reinstall of AutoCAD through a package. This did not resolve it. He also does not get the "crosshair" you normally see when using AutoCAD.
View 9 Replies View RelatedHow can I enter keywords in such a way that they don't initiate LR commands? (that subsequently make LR do all kinds of unwanted and unexpected things?
Usually it works. Now for reasons unknown to me, typing in the keyword box doesn't enter keywords, it enters commands.
And the white entry box under the keyword box is now active. I don't want that. I want to enter the keywords directly in the grey box, like I was doing before.
And now, I am also being prevented from removing unwanted keywords. Before, I could just delete them or backspace them out in the gray box.
I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in the width and height boxes. the cursor won't enter. same thing with resolution.
View 1 Replies View Relatedwhy I get a this when I click on a tab in the Options dialog box?
View 2 Replies View RelatedThis is probably a really stupid question, but several of my settings dialog boxes aren't showing up. I right click on the buttons at the bottom (at the moment snap and grid show this problem), click on the settings selection so I can modify them, then the autocad window looses windows focus (the bar at the top goes to the pale blue), and I can't do anything in autocad. I hit escape and it goes back to normal.
That looks to me like it is opening the settings window, and my focuse is being set to it, but I don't see it. How do I fix this? Can I reset dialog box starting locations (not like I know how it got moved to a crazy place in the first place, but still)?
How can I get my settings dialog boxes back?
How can I fix the following:
In AutoCad (I am working with ACA 2012) there are several dialog boxes e.g. the "rename" dialog box that always show up in the same (too small) size.
After renaming e.g. a block, the window closes and I have to repeat the command to rename another item.
I would like to size the window and keep the setting and would like to keep renaming things without getting interupted by automatical closeups of the window.
I have a brand new Dell M90 Workstation (1 week old) with Nvidia Quadro Fx2500M Video Card (Certified). Both the context menus and dialog boxes are disappearing off the screen at different times - they are still there because when the mouse is moved across the area parts of the boxes reappear. Dell has replaced the video card, hard drive and motherboard and still the same problem.
View 9 Replies View RelatedI lost my dialog boxes for SAVEAS and EXPORT. I tried the CMDDIA system variable but had no luck. I can't stand having to type in full paths for files that I'm trying to save.
I would imagine that alot of my other dialog boxes default back to command line as well.
I have an eye problem Macular Dystrophy) that requires the CUI Menus and dialog boxes to be made larger. Changing the customizing windows fonts do not increase the size of anything. I am still using AutoCAD 14 through virtual XP but want to use Autodad 2011 and can't get it to change so I can read the CUI.
View 1 Replies View RelatedI am using Inventor 2013 to create some complex shaped Maritime items. They have a lot of lofts, variable radius curves, fillets, etc. Anyway, on the more complex pieces, my menus start to dissapear or a dialog box, for example the fillet dialog box, will turn solid black and my system will hangup for a minute while executing the command. Am I running low on system memory or is this a video card issue? Here are my system specs:
HP XW8400 with two 3.4 GHz Xeon CPU's
4 GB RAM
160 GB Western Digital Raptor Hard Drive with approx 90 GB free
Quadro FX 1800 Video Card
Windows 7 Professional
Autodesk Inventor Premium Design Suite
I have several lisp routines that we have used since release 12 that now dont work in 2012. They all placed blocks with attributes, allowed user to fill in and continued to finish. In 2012 the attribute dialog box does not come up and point information for block placement is filled in the attributes. Is there a system variable that changes dialog boxes in 2012?
View 7 Replies View RelatedI received dual monitors a while ago and I've noticed an annoying issue with VBA dialogs. No matter which screen I have inventor open on all but one of my dialog boxes opens to the far left side of my right monitor. This is quite annoying as I normally have to drag the dialog bad to a better spot.
All of my dialogs have the "Center Owner" for the start up position selected. I can't explain why one scripts dialog box appeared centered and the rest don't.
How to get the AEC Modify Tools to show up on my pop-up dialog boxes? Is there something I need to intall and/or configure?
View 6 Replies View RelatedWhen you create a new Frame Generator assembly, you have a dialog box with Frame name, Path to frame file, Skeleton name, path to skeleton file. Inventor propose default values. Is there a way to automatically modify these default values ? For example, instead Inventor propose "New Frame file name = Frame0001.iam", I want a custom calculated file name.
View 9 Replies View RelatedI've been running dual monitors (22" and a 18") for a while, but I just upgraded to a larger second monitor (now both 22"). Before, I left AutoCAD running in the main monitor, but now I've switched it to run in the second monitor instead. Now AutoCAD will not remember the position or size of the Open and Save dialog boxes while it is in the second monitor. Sometimes it throws them back into the main monitor and other times they show up in the second but without the resize I did previously.
View 1 Replies View RelatedAutoCAD 2013 cannot display cyrillic characters in autolisp dialog boxes. These .dcl files were created a few years ago, but they displayed cyrillic characters correctly in all previous versions 2012 including. Now I see some strange symbols and the autolisp routine is useless!
Bug observed on 2 computers with the same result.
My OS is Windows 7 64-bit professional (bulgarian)
Office 2010 (64-bit)
Product Design Suite Professional 2013 (64-bit, of course)
I am editing a profile. Is there a way to trun off the gray boxes so that I can see the text input box (in blue behind the gray box).
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
In dialog boxes the drop down menus appear blank until I drag the mouse over it then the contents appear as I drag the mouse across. Also the cursor doesn't echo back (flash). I have tried updating drivers to no avail.
Running Civil 3D 2011 with all updates.
Windows 7 64 bit
16 gig ram
Quadra fx 1800
Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
I have attached a couple images to illustrate.
For some reason when I go to use "Save As" either from the dropdown "File" menu or from the keyboard shortcut the dialog box shows up for a split second and then dissappears. If I hit enter it acts as if I told it to write over the currently open file without renaming it and prompts me to verify that's what I want to do.
I can't see the dialog, so I can't rename the file if I want to, or change the location where the file is being saved to. I had my computer re-imaged last week and didn't have any issues once everything hed been reinstalled.
On Monday when I had the Wacom tablet drivers installed as they had been missed the previous week the issue started. I deleted my preferences but nothing changed. I had PS reinstalled as I know in the previous PS editions the software prefered to be reloaded when accessories were attached. This didn't fix the problem, so I had the wacom drivers removed.
It STILL didn't fix anything.When I came in this morning (23 June) neither PS or AI would even open up. I had the entire suite removed (even though Flash, Fireworks and Dreamweaver all operate as intended) and reinstalled. When they were finally done the problem was STILL there!! What other step am I missing?? Why out of the blue would these two, and ONLY these two be acting crazy?
Dialog boxes are appearing in various different places rather than a central location on the screen...
For example: the Save dialog appears half off screen towards the lower right section of the display. Various other boxes appear in the top left, upper right. All dialog boxes are moveable, so i can reposition them to the middle but the next time i used appear where they were, not centrally.
I work both on a 13" macook pro seperately and with and a 27" apple display attached. Dialog boxes are visiable on the 27" display but often in odd places.
Is there any way i can reset their position? I have tried reseting all dialogs, trashed the preferences in the preferences in the library folder on the computer but no luck. I am puzzled.
Can I get the old dialog boxes back in 2013 design with Windows 8?
View 9 Replies View RelatedAll of the dialog boxes in my Bridge & Photoshop CS6 have black writing on a black background which makes all of them unusable. I have recently zeroed my hard drive and reinstalled all software (Adobe via Creative Cloud) and this problem popped up.
There is a similar 2012 forum thread which addressed this problem, stating the solution was found by zeroing the drive, then reinstalling:
[URL]..........
Here's what it looks like:
On Mavericks. I'm getting white blank dialog boxes in Photoshop CC. Doesn't happen right away. It lets me work for a limited time then I get the blank boxes and can only Force Quit. I don't use Suitcase but I do have a Wacom. iMac.
View 8 Replies View RelatedNoticed the mis-alignment that occurs in some of Corel's dialog boxes? For example in the New Document dislogs (both Draw and Photo Paint). The Draw dialog looks like this on my machine:
Notice how the labels are out of line with the dialog controls - e.g. the label "Preview Mode" is much higher than the drop-down list it belongs to - way out of alignment. Also, notice how the 'Height' and 'Width' spinners cut off the second 'm'. It's the same situation with Photo Paint too.I mention this because in the Scott Georgeson Video Tutorials, his New Document dialog boxes are not misaligned
I am trying to find where to turn on the floating menu boxes in Photoshop CS. Right now I have the tools, color swatches and navigator, but want the layer toolbox. I know I can go to the pulldown menu to select layers, but it is much easer to use the floating box to select my between my different layers.
View 1 Replies View Related