3ds Max :: Can Get Old Dialog Boxes Back In 2013 Design
Mar 11, 2013Can I get the old dialog boxes back in 2013 design with Windows 8?
View 9 Replies
ADVERTISEMENT
AutoCAD 2013 :: Save As And Export (FBX) Dialog Boxes Are Gone?
Apr 19, 2012I lost my dialog boxes for SAVEAS and EXPORT. I tried the CMDDIA system variable but had no luck. I can't stand having to type in full paths for files that I'm trying to save.
I would imagine that alot of my other dialog boxes default back to command line as well.
AutoCAD 2013 :: Dual Monitors - Open / Save Dialog Boxes?
Jan 9, 2014I've been running dual monitors (22" and a 18") for a while, but I just upgraded to a larger second monitor (now both 22"). Before, I left AutoCAD running in the main monitor, but now I've switched it to run in the second monitor instead. Now AutoCAD will not remember the position or size of the Open and Save dialog boxes while it is in the second monitor. Sometimes it throws them back into the main monitor and other times they show up in the second but without the resize I did previously.
View 1 Replies View RelatedAutoCAD 2013 :: Cannot Display Cyrillic Characters In AutoLisp Dialog Boxes
May 15, 2012AutoCAD 2013 cannot display cyrillic characters in autolisp dialog boxes. These .dcl files were created a few years ago, but they displayed cyrillic characters correctly in all previous versions 2012 including. Now I see some strange symbols and the autolisp routine is useless!
Bug observed on 2 computers with the same result.
My OS is Windows 7 64-bit professional (bulgarian)
Office 2010 (64-bit)
Product Design Suite Professional 2013 (64-bit, of course)
AutoCAD 2013 :: Tool Palettes Design Group Lost - How To Get Back
Mar 15, 2013I lost my Tool Palettes Design Group, I still have the same profile the only thing is showing is the menu bar, how to get it back
View 2 Replies View RelatedPhotoshop :: Dissappearing Dialog Boxes
Jun 23, 2009For some reason when I go to use "Save As" either from the dropdown "File" menu or from the keyboard shortcut the dialog box shows up for a split second and then dissappears. If I hit enter it acts as if I told it to write over the currently open file without renaming it and prompts me to verify that's what I want to do.
I can't see the dialog, so I can't rename the file if I want to, or change the location where the file is being saved to. I had my computer re-imaged last week and didn't have any issues once everything hed been reinstalled.
On Monday when I had the Wacom tablet drivers installed as they had been missed the previous week the issue started. I deleted my preferences but nothing changed. I had PS reinstalled as I know in the previous PS editions the software prefered to be reloaded when accessories were attached. This didn't fix the problem, so I had the wacom drivers removed.
It STILL didn't fix anything.When I came in this morning (23 June) neither PS or AI would even open up. I had the entire suite removed (even though Flash, Fireworks and Dreamweaver all operate as intended) and reinstalled. When they were finally done the problem was STILL there!! What other step am I missing?? Why out of the blue would these two, and ONLY these two be acting crazy?
AutoCad :: Dialog Boxes Not Showing Up
Sep 1, 2008This is probably a really stupid question, but several of my settings dialog boxes aren't showing up. I right click on the buttons at the bottom (at the moment snap and grid show this problem), click on the settings selection so I can modify them, then the autocad window looses windows focus (the bar at the top goes to the pale blue), and I can't do anything in autocad. I hit escape and it goes back to normal.
That looks to me like it is opening the settings window, and my focuse is being set to it, but I don't see it. How do I fix this? Can I reset dialog box starting locations (not like I know how it got moved to a crazy place in the first place, but still)?
How can I get my settings dialog boxes back?
Illustrator :: Dialog Boxes Appear Off Screen?
Oct 8, 2012Dialog boxes are appearing in various different places rather than a central location on the screen...
For example: the Save dialog appears half off screen towards the lower right section of the display. Various other boxes appear in the top left, upper right. All dialog boxes are moveable, so i can reposition them to the middle but the next time i used appear where they were, not centrally.
I work both on a 13" macook pro seperately and with and a 27" apple display attached. Dialog boxes are visiable on the 27" display but often in odd places.
Is there any way i can reset their position? I have tried reseting all dialogs, trashed the preferences in the preferences in the library folder on the computer but no luck. I am puzzled.
AutoCAD 2010 :: Dialog Boxes Not Displaying?
Feb 27, 2012When opening AutoCAD 2010, I get an error message "Unable to load profile...". This happened unexplicably. I have been using AutoCAD several months with no problems. One annoying consequence is that dialog boxes do not display. For example, running DIMSTYLE does not open the Dimension Style dialog box; instead, a list of options such as ANnotative, Save, and Restore appears. How do I get back to normal?
View 1 Replies View RelatedAutoCAD Architecture :: Rename Dialog Boxes
Apr 22, 2012How can I fix the following:
In AutoCad (I am working with ACA 2012) there are several dialog boxes e.g. the "rename" dialog box that always show up in the same (too small) size.
After renaming e.g. a block, the window closes and I have to repeat the command to rename another item.
I would like to size the window and keep the setting and would like to keep renaming things without getting interupted by automatical closeups of the window.
AutoCAD Inventor :: Disappearing Dialog Boxes
Apr 28, 2007I have a brand new Dell M90 Workstation (1 week old) with Nvidia Quadro Fx2500M Video Card (Certified). Both the context menus and dialog boxes are disappearing off the screen at different times - they are still there because when the mouse is moved across the area parts of the boxes reappear. Dell has replaced the video card, hard drive and motherboard and still the same problem.
View 9 Replies View RelatedPhotoshop :: Dialog Boxes In Bridge CS6 Have Black Background
Nov 21, 2013All of the dialog boxes in my Bridge & Photoshop CS6 have black writing on a black background which makes all of them unusable. I have recently zeroed my hard drive and reinstalled all software (Adobe via Creative Cloud) and this problem popped up.
There is a similar 2012 forum thread which addressed this problem, stating the solution was found by zeroing the drive, then reinstalling:
[URL]..........
Here's what it looks like:
Photoshop :: Mavericks And CC - Blank White Dialog Boxes?
Nov 16, 2013On Mavericks. I'm getting white blank dialog boxes in Photoshop CC. Doesn't happen right away. It lets me work for a limited time then I get the blank boxes and can only Force Quit. I don't use Suitcase but I do have a Wacom. iMac.
View 8 Replies View RelatedCorelDRAW Graphics Suite X5 :: Misalignment In Dialog Boxes
Aug 5, 2011Noticed the mis-alignment that occurs in some of Corel's dialog boxes? For example in the New Document dislogs (both Draw and Photo Paint). The Draw dialog looks like this on my machine:
Notice how the labels are out of line with the dialog controls - e.g. the label "Preview Mode" is much higher than the drop-down list it belongs to - way out of alignment. Also, notice how the 'Height' and 'Width' spinners cut off the second 'm'. It's the same situation with Photo Paint too.I mention this because in the Scott Georgeson Video Tutorials, his New Document dialog boxes are not misaligned
AutoCAD 2010 :: Unable To Get Dialog Boxes To Open
Mar 9, 2012I have several lisp routines I have been using since Acad 2002 (with occasional minor revisions) for my title blocks that open up a dialog boxes. None of the lisps I have that should open up a dialog box are working in a fresh 2012 install.
The lisps work in 2010 but not in 2012. I searched through the boards and found some info but it hasn't worked (made sure ATTREQ & ATTDIA set to 1).
Here is one the lisps in question:
(defun c:title(/ archl sqftl filel datel salel namel builderl planl subdivision1l subdivision2l plana planb year month day rb1 rb2 rb3 insp1)
(setvar "cmdecho" 1)
(command "attdia" "0")
(command "-osnap" "none")
(setq dcl_id (load_dialog "tools.dcl"))
[code]...........
I have tried changing the attdia value to 1 in the lisp but the result is the same. The command fails at the same spot:
Command: TITLE attdia Enter new value for ATTDIA <1>: 0
Command: -osnap Enter list of object snap modes: none
Command: nil
If I use -insert I can get the blocks to run by typing all the information at the command line but I want my dialog boxes back!
AutoCAD Architecture :: Pull Down Menus And Dialog Boxes
Mar 24, 2012I have an eye problem Macular Dystrophy) that requires the CUI Menus and dialog boxes to be made larger. Changing the customizing windows fonts do not increase the size of anything. I am still using AutoCAD 14 through virtual XP but want to use Autodad 2011 and can't get it to change so I can read the CUI.
View 1 Replies View RelatedAutoCAD 2010 :: Cannot Get Dialog Boxes For Purge / Xref
May 3, 2012I cannot get dialog boxes for purge, xref, etc. I only get the command line.
I made sure filedia=1 and cmddia=1.
The tilde ~ key will not bring up the dialog box from the command line.
Photoshop :: Open / Save Dialog Boxes Not Working Correctly
Sep 24, 2012Environment: CS6 (PS 13.0.1) Mac OS X 10.7.5. Plenty of hardware. (Generally starting with .CR2 RAW.)Recently (maybe since the 13.0.1 update??), I have been having problems with the open and save as dialog boxes.
First. The open file dialog always defaults to Enable: blank (i.e. no file types enabled). Each time I have to go to the bottom of the dropdown list and select "All readable documents" before I can open ANY type of file. I've searched in everyway I can think of looking for some method to have OPEN default to "all readable" but can't find anyway to do this. when whipping around at deadline having to stop each time and make this change is irritating. No other program has this difficulty (including Illustrator and InDesign). PS 5.5 did not exhibit this behavior on the same machine.
Second. When I save as and try to select any file format, say going from psd to tiff, the format dropdown list ALWAYS selects the format ABOVE the one I choose. Example: If I select JPEG, PS tries to save as .iff. If I pull the selection down to JPEG2000 it will then save as standard JPEG. Again just an irritant but, tiff (which I need for several other programs) is last on the list thus there is no way I can go one below it to get tiff format selected. It always comes out as png. Also note that the Format selection indicates the correct format - in the case of tiff the dialog box shows TIFF selected, but the program is appending .png. (Continuing the save as (without altering my selection) always results in the incorrect format no matter what the Format dialog says in the save as operation.) Again, no other program I work with (including several Adobe products) exhibits this behavior.
I seriously need to be able to save as tiff.
CorelDRAW Graphics Suite 11 :: Certain Dialog Boxes Don't Display Correctly
Apr 7, 2012currently getting by with v11 on winXP..Having a recent problem which I hope one of you can identify. I undoubtedly caused this problem myself by while trying to set up multiple monitors with different screen resolutions, dpi's, font viewing sizes, etc... but now I don't know exactly what setting caused it or how to get back to normal.
Here's the problem - two dialog boxes are displaying very skewed as shown in the screen-shots below. It's only these two dialogs I seem to have trouble with. It's like their popup windows are wrong proportions. No settings I change in my monitor setups seem to correct the situation.
AutoCAD Inventor :: Menus And Dialog Boxes Disappearing Or Blacking Out?
Oct 9, 2012I am using Inventor 2013 to create some complex shaped Maritime items. They have a lot of lofts, variable radius curves, fillets, etc. Anyway, on the more complex pieces, my menus start to dissapear or a dialog box, for example the fillet dialog box, will turn solid black and my system will hangup for a minute while executing the command. Am I running low on system memory or is this a video card issue? Here are my system specs:
HP XW8400 with two 3.4 GHz Xeon CPU's
4 GB RAM
160 GB Western Digital Raptor Hard Drive with approx 90 GB free
Quadro FX 1800 Video Card
Windows 7 Professional
Autodesk Inventor Premium Design Suite
AutoCAD Visual LISP / AutoLISP :: No Attribute Dialog Boxes?
Apr 13, 2011I have several lisp routines that we have used since release 12 that now dont work in 2012. They all placed blocks with attributes, allowed user to fill in and continued to finish. In 2012 the attribute dialog box does not come up and point information for block placement is filled in the attributes. Is there a system variable that changes dialog boxes in 2012?
View 7 Replies View RelatedAutoCAD Inventor :: VBA Dialog Boxes Opening On Wrong Monitor?
Dec 10, 2013I received dual monitors a while ago and I've noticed an annoying issue with VBA dialogs. No matter which screen I have inventor open on all but one of my dialog boxes opens to the far left side of my right monitor. This is quite annoying as I normally have to drag the dialog bad to a better spot.
All of my dialogs have the "Center Owner" for the start up position selected. I can't explain why one scripts dialog box appeared centered and the rest don't.
AutoCAD Civil 3D :: How To Get AEC Modify Tools To Show Up On Pop-up Dialog Boxes
Dec 10, 2007How to get the AEC Modify Tools to show up on my pop-up dialog boxes? Is there something I need to intall and/or configure?
View 6 Replies View RelatedAutoCAD Inventor :: Modify Default Values In Dialog Boxes
Sep 18, 2012When you create a new Frame Generator assembly, you have a dialog box with Frame name, Path to frame file, Skeleton name, path to skeleton file. Inventor propose default values. Is there a way to automatically modify these default values ? For example, instead Inventor propose "New Frame file name = Frame0001.iam", I want a custom calculated file name.
View 9 Replies View RelatedAutoCAD 2010 :: How To Turn On Dialog Boxes When Enter Commands
Sep 6, 2012How do I turn on the dialog boxes when I enter commands? I finally found HPDLGMODE for the hatch command, but I would like it for all commands, especially array.
I have my FILEDIA set to 1.
Corel PHOTO-PAINT X6 :: Get Rid Of Thousands Separator In Resample And Paper Size Dialog Boxes?
Jul 19, 2012Can I get rid of the thousands separator in the Resample and Paper Size dialog boxes?
View 4 Replies View RelatedAutoCAD Civil 3D :: Drop Down Menus In Dialog Boxes Appear Blank And Cursor Doesn't Echo
Jan 18, 2011In dialog boxes the drop down menus appear blank until I drag the mouse over it then the contents appear as I drag the mouse across. Also the cursor doesn't echo back (flash). I have tried updating drivers to no avail.
Running Civil 3D 2011 with all updates.
Windows 7 64 bit
16 gig ram
Quadra fx 1800
Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
I have attached a couple images to illustrate.
CorelDRAW Graphics Suite X6 :: Get The Export Dialog Box Back In CD?
Apr 12, 2012Transitioning to CD X6 while try to get work done is a chore. I just loaded the real CD X6 box version. It deleted the downloaded test version. But now I made a new poster and I am using Ctrl-E to export it and there is no Export Dialog box. It just saves the JPG in what it thinks I need!! How do I get the Export Dialog box back to control the parameters of my Export?
View 1 Replies View RelatedGIMP :: Layers Dialog Tool Set Back Up And Visible
Jun 20, 2011I can't seem to get the Layers dialog tool set back up and visible. I have uninstalled and re-installed and it still is not visible.
I have downloaded the latest version from cnet.com - 2.6.11. How do I get it back?
AutoCAD Inventor :: Can't Get Extrude Dialog Box Back On-screen Without Second Monitor Attached
Nov 11, 2012Normally I use two monitors, but I'm travelling. Because I last placed the extrude box on my other monitor I can no longer get access to it on the only screen I have left. Normally, as with any window, you could hit Alt+Space and M but....the blasted mini-toolbar takes focus first!! It seems that all the other menus don't have this, only extrude. Is there any way to reset menus when disconnecting? There really should be. I'd say that the program ought to know that there is only one monitor connected and respond accordingly.
W7-64, all up to date
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
AutoCAD 2013 :: Drawing Order - Send To Back / Not Working Anymore In 2013
Apr 17, 2013I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?