How to print the abbreviations of the commands?
I tried to print all the abbreviation of the commands but couldn’t know how can I do that.
I tried File>Print (as shown in the screenshot), but didn’t work
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I like the new feature in 2012 where I can type a couple of letters at the Command Prompt and get several commands to pick from but I would like to have the command alias back (for me) such as typing E and the Erase command would be there. I went to Express Tools and loaded the acad.pgp file; typed RE-INIT at command prompt but there was not change. Closed the program and restarted and still no change. When I type E, the first command is EATTEDIT. I don't see any of the aliases abbreviations. How do I get these to show up?
View 2 Replies View RelatedI've just installed ACA 2010 on my laptop on Windows XP64 bit
When I select a command such as the wall or door command. The command starts then exits out before I can draw anything.
It seems that the 'combine zoom and pan commands' option doesn't work correctly. Let's say it doesn't react as i am used to in previous version. now i have to do the undo command or 'ctrl z' many times before i am back at the point where i want to go. I using the middle mouse button often to zoom in and out, and for panning. but now there are a lot of steps to undo if you want to go back.
I tried to switch of and on this option in the options dialog but no difference.
An older gentleman at our company is very much used to having F12 as endpoint, F11 as intersection and F10 as dist. Now that I've upgraded him to 2011, his life is pretty much ruined.
No matter what I try, I can't get the temporary override buttons to work. F10 always does POLAR, F11 always does OTRACK and F12 always does DYN.
How can I kill AutoCAD's default behavior and implement what he wants done?
I have autocad 2011 and commands not working. I reinstall autocad but command not working.
View 2 Replies View RelatedLock/unlock commands have three major problems! No “window selection” to select the layers required to be locked in one go. For example, the “isolate” tool works fine with window selection! In principle, I have no idea about the philosophy beyond which some commands are banned from “window selection!No BUILT-IN icon to Lock All or Unlock All (sure, we can customize it but I’m talking about having this command as built-in)The AutoCAD doesn’t give an alert if a command is applied in the location where particular layers are looked. For example, in many cases, we get into trouble as we move particular objects to discover later that some of the objects were locked! That’s fine, but the AutoCAD should give warnings in case a command is applied where some layers are locked.
View 3 Replies View RelatedI have a lot of pre existing sheet metal parts with my material listed as Steel, Mild.
I am using this code to automatcally fill out my iproperties but the material name is not exactly what I want it to say. iProperties.Value("Project", "Description")=iProperties.Material
I'd like it so that any time it sees Steel, Mild it replaces it with the text "A36"
AutoDesk Inventor 2012
I recently downloaded in my new computer the version of autocad 2011, but when I type letters for the command list to show, it doesnt!
View 1 Replies View RelatedJust recently I have really started to develop LISP routines and I am curious if it is possible to integrate them with a Keyboard call-out.
View 9 Replies View RelatedI've just encountered strange issue and I cannot find the proper solution anywhere.I work in AutoCAD for 5 years and I am used to type commands on the keyboard (I usualy don't use icons in AutoCAD).
I was used to...just cancel all previous commands by ESC key and start typing the command.But since last week I had to click in the command line to write the command in it. How to type commands without annoying clicking in command line?
Just got AutoCad 2012. Commands like Mirror and Copy which involve duplication (no problem with Move or Rotate, for example) will cause AutoCad to not respond for a few minutes. I believe it only is an issue with files brought forward from AutoCad 2000.
View 6 Replies View RelatedI created a command that I no longer use. I actually made a spelling error upon creating it "SUPECLOSE" and I want to delete it.
This is how I created this command: I typed in ALIASEDIT in order to add a new alias to a command.
I then clicked on the "Add" button.
In the "Alias:" field, I typed in "xx"
And in the "AutoCAD Command:" field, I typed in "SUPECLOSE" - which isn't actually an autoCAD command. "SUPERCLOSE" is the command I use to run a custom LISP routine that I created. Upon hitting pressing "OK" to this, AutoCAD prompted me with: "'SUPECLOSE' is a new command, Do you want to add this to your list of commands?"
I said yes. And then shortly afterwards realized the spelling error I had made. Problem is...I don't know how to access this list and delete the new command that I had just created (which does nothing).
We are working in AutoCAD 2010 and the keyboard shortcut commands are not working for one of our users. we are having difficulty getting it back online for her. we tried a menu load for the acad.pgp file and it isn't working .
View 2 Replies View RelatedIs there a list of obsolete commands / variables AutoCAD 2012?
AutoCAD Commands, variables, LISP commands, LISP variables?
The problem is that AutoCAD 2010, does not recognize any object snap commands, all the other comands work just fine.
I have reinstalled the program and don´t work.
What could be?
We've upgraded to 2012 and have noticed a problem when fast clicking on the mouse when using commands.
For example when using the erase command I would usually type E and then quickly right click and left click. However in 2012 it brings up random command instead of erase i.e. sheetset, publish, ucs etc..Bringing up the text window afterwards it shows
Command: e
ERASE
Select objects: Specify opposite corner: *Cancel*
0 found
Select objects: *Cancel*
Command: _PointCloudIndex
The right click and left click are only processed once.This happens on all commands typed on the command line not just erase
When i'm using the modify commands, the objects that I'm modifying become choppy, and when I zoom in and out with the third button/wheel, the movement of the zoom isn't fluid like it normally is, also It is extremely hard to grab an osnap during this process.
View 2 Replies View RelatedHaving only recently started using Autocad 2012 (I mainly used various versions of LT over the last 10+ years) I have noticed a few strange goings on.
It doesn't happen all the time but sometimes whilst in a command ("move" for example), when I go to click on an object or pull a window, a separate, totally random command activates itself. Why this happens, I just hit escape a couple of times & continue what I was doing.
I'm not sure if it is a case of me, in my haste, missing my intended object & hitting the right click button (which I use as a return & not a drop down menu).
How do I turn on the dialog boxes when I enter commands? I finally found HPDLGMODE for the hatch command, but I would like it for all commands, especially array.
I have my FILEDIA set to 1.
Using ACAD2013, any command I try to execute requires two clicks. This specifically occurs with transformational commands - i.e. offset, rotate, mirror, but not line. For example I will enter the "OFFSET" command and hit enter, however instead of prompting me to input my OFFSET variables I will have to hit enter again and then enter the requisite variables. In effect I have to hit enter twice to execute any command of this sort. I have already tried changing my PICKFIRST settings, and AUTOCOMPLETE. I'm at a loss.
View 9 Replies View RelatedMy autocad 2012 installation runs slower when I have the network cable plugged in. This is very obvious when I run lisp commands.
I have a standalone installation with a drawing on a local drive, also SP1 is installed.
lost ability to preselect lines when typing keyboard commands?
View 3 Replies View RelatedIs there a way to create an 'Abbreviations Legend'?
View 2 Replies View RelatedI don't understand why Lightroom will not send print commands properly to my Epson Stylus Photo 1400, but all I get is error.
Since the printer works with every other program on my computer, including Elements, it must be a Lightroom problem.
Currently we change our printing equipment, Kyocera to HP.The problem is that before printed instantly (in seconds) and now it takes 20 minutes to 45 minutes.
For example:
1. - A 2D file with 655 KB they send to print and goes to the print queue with a weight of about 40 MB.
2. A 2D file with 2MB send it to be printed and the print queue with a weight of about 40 MB.
HP 9050 with PCL6 Universal Printer Driver, to which was added more memory and hard drive and still the same.
Win XP sp3
AutoCAD 2010 with the service pack installed
2GB RAM
NVIDIA Quadro SX1700
I'm trying to print to Adobe pdf. I know I can use the DWG to PDF which works great, but I don't know if this is a bug or a setting that I have to adjust. At first I thought this was an Adobe Pro X problem, but now I'm 100% sure it's a setting or something in ACAD. When in model space, if I print and print to adobe pdf, the file looks good, sharp. I can zoom in all the way and it looks good. But in paperspace, when I print to Adobe, the quality is awful. like if it printed an image. It looks ok zoomed out but when I zoom in (and not that far in), the quality is terrible, what is it that I'm missing? What setting needs to get adjusted? It looks like an awfully compressed pdf file. Also, when printing in paperspace, it also takes twice as long. Its quick in modelspace and looks great.
View 3 Replies View RelatedIf I insert a pdf underlay into a drawing, it won't display or print out. I know a pdf has been inserted as I can use Erase-All and it will say an object has been selected. The funny thing is that it all worked fine a week ago, and now doesn't. I can open a drawing done months ago which was fine but now there is no pdf displayed.
I've checked various settings against another computer and they are the same.
I have a few viewport on a drawing and when I hit Print I get the following warning:
" some viewports do not fit the right zoom conditions. Do you want to update them before plotting"
It then proceeds to print correct.
What is the reason for this error message and how do I get rid of it?
I am currently printing/plotting a ANSI D size drawing to 1:2 scale but whether I plot directly to the printer or publish to PDF I lose the drawing border.
View 7 Replies View RelatedWhy plotting the drawing in pdf file produces a NOT to scale drawing?
I’m wondering if there is a way to print the drawing in a pdf file such that the drawing scale is kept correct.
For example, I tried to print the drawing shown in the screenshot in 1/100 scale using the Adobe pdf printer, but later, as I printed the pdf file, the printed drawing is not to scale!
Why the pdf file doesn’t keep the scale?
Is there a way to “preserve” the scale while printing the drawing in a pdf file?