I like the new feature in 2012 where I can type a couple of letters at the Command Prompt and get several commands to pick from but I would like to have the command alias back (for me) such as typing E and the Erase command would be there. I went to Express Tools and loaded the acad.pgp file; typed RE-INIT at command prompt but there was not change. Closed the program and restarted and still no change. When I type E, the first command is EATTEDIT. I don't see any of the aliases abbreviations. How do I get these to show up?
I am using AutoCAD 2013 and, out of nowhere, my keyboard aliases don’t work. Ex: When I type m for MOVE, I get MADD. When I type co for COPY, I get COLOR. If I turn off ‘Auto Append’, and try it, I get ‘UNKNOWN COMMAND’. I’m at a loss as to what to do. (I checked to see if I lost the acad.pgp file, but it’s still there.) how to get them back.
I have a lot of pre existing sheet metal parts with my material listed as Steel, Mild.
I am using this code to automatcally fill out my iproperties but the material name is not exactly what I want it to say. iProperties.Value("Project", "Description")=iProperties.Material
I'd like it so that any time it sees Steel, Mild it replaces it with the text "A36"
I've just discovered my Command Line Box at the bottom of the screen is missing in action...not sure what I did to loose it. Any COMMAND to get it back?
Any command to fill in a little gap of missing material when you extrude one surface at the angle to the other. It's easy when it's a flat surface to just extrude in the othe direction, but with 3D loft it's not as much fun. See pic attached.
Somehow, in sketch mode, under the draw panel, I have lost the Hatch/Fill command. I've spent several hours searching, and cannot find a way to get it back.
The Array command does not work in the same way like in previous versions and I find it difficult. Also the snap mode does not work propel y when no command is in process and no object is activated.
we have a strange problem showing up here on Autocad Architecture 2014 on Windows 8: We use the "space-bar" to confirm a command or shortcut. After start of AutoCAD everything seems fine but suddenly a hit of the space bar is interpreted as two hits:
Line <space> Specify first point: Specify first point: Specify next point or [Undo]: [cursor ready for next point]
No chance to point the "first point". It is either 0,0,0 or the last coordinate.
Using the <Enter> button (or selecting an icon) is working as expected / normal but very unhandy because on the right side of the keyboard.We tried different keyboards but this is not a hardware problem!
When drafting either in model space or paperspace, eventually either the command line disappears completely "OR" the command line area increases and prevents me from seeing the tab sheets for accessing paperspace "OR" the mouse arrow gets stuck outside of the drawing area. This is the most non-productive program here after all these years (the worst version ever)
I either have to do one of the following, in order, hopefully to achieve being able to continue to draft;
1. double click the 2D Wireframe in the upper LH corner of the drawing plane. 2. envoke "Task Manager" but then cancel. 3. turn off the Autocad program and start over.
I loaded 2013 Civil 3D and I customized my Ribbon with Zoom Commands I use frequently; everything looked fine...I changed the Workspace to Planning & Analysis and cutomized my Ribbon to include the Zoom Commands but a Button Icon for ZOOM_TO_POINT came up with a cloud & question mark. I went to look for the Icon Image & I don't see it. I made the mistake of changing the Icon to another hoping I could change it back but it's not there. I went to the 2012 verison & the Button Icon is there...first icon listed. Where are the icons in 2012 so I can drag & drop image into 2013?
The icon has a point symbol with a magnifying glass. I've checked other computers and the same thing. Can't find the Image Icon for ZOOM_TO_POINT. It shows up when you load the software but if you want to edit it...it's not there in the CUI Button Icons.
I recently switched to Inventor 2012 from a previous version. I cannot find the create flat pattern command. Some of my coworkers were able to customize their RMB menu to have this command, but I am not even able to do that! (They don't have the command on the ribbon, either.)
I navigate (all functions, pan zoom, etc) with my space explorer in autocad architecture 2011 any autocad command will be cancelled by the 3d mouse. when use the 3d mouse, the cursor in autocad changes to the default windows cursor display. I have an updated version of autocad 2011 with all of the service packages and hotfixes, the space explorer software driver is up to date too, windows 7 ultimate x64 is updated too.command line example:
Command: _line Specify first point: "I move the 3d mouse" Specify next point or [Undo]: *Cancel* Command: *Cancel*
I tried reinstalling both autocad and 3dconnexion, restored the default settings of the 3d mouse. I also shutdown the logitech mouse software to make sure it was not interfering with anything. I also double checked that it was not a display refresh issue with the graphics card or the display settings for autocad, I also played with the profiles in the 3dx sofware.
I installed Aucad Architecture 2012 and same freaking issue. The only way to solve it "half way" (so not a real solution) is to change the visual style to other than 2d wireframe, but when doing so, whatever object you are manipulating seems to freeze on the screen and doesn't refresh untill you move the mouse (normal one), basicaly the manipulated object doesn't zoom with the rest of the objects in the screen.
This is very anoying since the purpose of these stuff is to create an uninterrupted worflow not the complete oposite!! this mouse is worth around 200-300 dolars and Autodesk took responsability for it's drivers!! and it doesn't work!! it's faster to work with your regular mouse. Also you should develop the driver version for the Autocad Mac version.
I have been using Architecture 2013 for a while now, but now there is what I beleve to be a configuration issue. Essentially, ACAD loads,but does not recognise any AEC components. The tool pallette no longer has an icon to add a wall, for example. If I load an older drawing that has a wall in it, and select the wall, the Properties window says it is a wall, but none of the blue grips is visible. Right clicking does not give the option to "Edit Wall Style" for example. It behaves as though it does not know what an Architecural element is. If it type "WALLADD" at the command line, it says ""Unknown Command".
The company I purchased it from initially had me do a "repair", then a "reinstall" and then a "Clean reinstall". All of which I have done.
I was using 2009 Architecture. I kept getting a message in the command line: "WARNING: Xdata tag 100 is missing" like hundred to 1000 times and while its scrolling through this same message in the command line I can not do anything but wait for it to finish. Not sure if a recent windows update has anything to do with it. I am using XP Pro. I have a Dell with 3GB of ram and a Radeon X300/X550/X1050 video card and am running dual monitors. I have an upgrade to Archtiecture 2010 so rather than reinstall 2009 I installed 2010. Unfortunately, same problem. In 2009 I seem to remember that it was more random. In 2010, it pops up when I do an xref reload.
I know Ribbons have been out for a while, but I just finally updated to ACA 2010 from ACA 2008. Why these ribbons are suppose to be so much better. I can obviously re learn where everything is... but it takes multiple steps to get to a command that I used to be able to access in one click.
I recently downloaded the trial version of Autocad Architecture 2013. I changed my main customization file to aca.cuix so that I would have the build panel. The build panel is now there, but it is not working. All the icons are questions marks and when I click on the ceiling grid icon it says 'unknown command'. How can I get the ceiling grid function to start working?
We recently upgraded to Autocad Architecture 2013 and the trim command is driving me mental. Lets say I have a window mullion pattern with 4 intersecting lines and I want to trim out the center. (see attached example) I start the trim command, then right to left window to select the 4 lines, then use another right to left selection window to trim out the lines. It always leaves on of the lines leaving me to have to click one more time. This is a huge pain when you have to do this multiple times. That is a lot of extra clicks. What gives? I never had this issue before.
AA 2012 - The REFEDIT window is missing, which means I cannot add a subtract objects while editing a block, I can save and close the block by Right Clicking menu, but the window is nowhere to be found!
My AutoCAD Architecture 2011 program is missing the button to export to an earlier version of AutoCAD. I have seen this button on other computers at our office. I need to export some drawings to earlier versions without having to bind exrefs and do a 'save as' earlier version.
How I can get this button back? Does it have anything to do with DWG Trueview?Here are two screen shots, one with the button, and one without.
I am using ADT 2013, and I had my drawings printing fine, and was able to override layer colors and plot some xref's such as the floor plan ghosted so the electrical plan would show up better. Now it says that Full Saturation is missing. I can override the vp color in the layer properties manager, but when I go to plot preview the layer still remains colored.