AutoCAD Civil 3D :: Button Icon Missing For A Zoom Command
Sep 4, 2012
I loaded 2013 Civil 3D and I customized my Ribbon with Zoom Commands I use frequently; everything looked fine...I changed the Workspace to Planning & Analysis and cutomized my Ribbon to include the Zoom Commands but a Button Icon for ZOOM_TO_POINT came up with a cloud & question mark. I went to look for the Icon Image & I don't see it. I made the mistake of changing the Icon to another hoping I could change it back but it's not there. I went to the 2012 verison & the Button Icon is there...first icon listed. Where are the icons in 2012 so I can drag & drop image into 2013?
The icon has a point symbol with a magnifying glass. I've checked other computers and the same thing. Can't find the Image Icon for ZOOM_TO_POINT. It shows up when you load the software but if you want to edit it...it's not there in the CUI Button Icons.
On some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
1) How do I get the ucs Icon (X,Y axis) to not move when I zoom in and out. I want it to be stationary in the bottom left corner as I'm used to seeing it.
2) For some reason I cannot peform the simple task of drawing a line by picking a point and then entering a distance. Ever since I've been drafting with cad I have been able to type "line" in the command line and then am asked to "specify first point" (I do so), and am asked to "specify second point" (which I do). Normally I do this in ortho mode (0, 90, 180 etc.) For example, using 25', I lead the cursor to the right as my "second point", and the line normally shows up 25' to the right. This is not happening now for some reason. After I specify my second point as 25', the command linen states, "point or option keyword required" and does not draw the line. I'm sure the solution is an easy one but I've never seen this happen before.
I've created a button that I've implemented into inventor. However I am at a loss as to how to create an icon for the button. I've read all the articles i can find (such as)
[URL]..
[URL]....
I've restarted the program and the computer multiple times but to no avail.
I'm searching for quiet a while now, but I can't find information or an example to show an Icon (image) in a button on the shelf for my new tools. The addin should run on 64bit windows.
I found some example wich use vb6 tools, but I don't have these on my win64 and c#.
The double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?
I had this new script which is used in Unwrella2 so I placed it in the user interface as a new button in the tool bar, the problem is it has no icon so, I wanted to customize one for it. I start searching tile I found how to and I followed the description..I customize a button icon 24*24 it had to be *.bmp 24-bit(I also found that to have an alpha channel it has to be 32_bit 8red 8green 8blue 8alpha) or 16 bit it must contain an alpha channel which I did all of this I even toke one of the original ones from the UI folder and I customize it then every time I copy the new button in icon folder and restart max 2012 and go to “edit button appearance” and search for the new button nothing there I named the new button right “group-name”_24i.bmp but still the max 2012 don’t want to read it.
in the image attached a button icon which should give me a new group called Unwrella with two buttons. I even found some original buttons which is split in two file (file *_24a.bmp contain the Alpha as RGB) and (file *_24i.bmp contain 24_bit colored RGB) I even tried this but still max 2012 don’t read it.
I'm trying to zoom a photo by right clicking but the zoom icon shows only in some areas of the picture (mostly on the left side). Everywhere else, right click takes me to the next photo?
I have a portion of my routine below. Basically I need the user to continue to loop through the command. They are picking Circles or blocks in the drawing and I get the insertion point, then insert a new block. However, whenever they try and use a transparent zoom or pan to move around the drawing when the promptentityresult is hit, it zooms back to the original location.
Here is a code....
< CommandMethod("getpnt", CommandFlags.Session)> _ Sub findpnt() Dim cnt AsInteger = 0 Dim NEWPNT AsPoint3d = GetInsPoint() While cnt < 3
My lot top mouse is not working no more with the zoom in and out command. I dont have and external mouse other than the one is install from factory on my lot top comp. It was working perfect, but i think i click something by mistake. I only learn enough to draw in cad but when it comes up to problems like this i do not know what to do. I was trying to copy a table with chairs from and other file and when i pasted to my drawing something happen so my mouse is not zooming in or out in my drawing .
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
when i work on geometry which is not in orthographic orientation i always prefer to create orthographic view of this, that's what i do :
Command : ucs Command : z Command : (selecting representative angled 2 points) Command : plan Command : c
than the whole zoom is lost , and i need to find again the portion , and save a view. i want to automate this process but before i automate it i want to know if there is a way to avoid zoom lost after executing the (plan) command?
This happens with a number of drawings, I believe all the files are very large approximately 8mb+. The issue is that by using the REGEN or the Zoom - Dynamic command, it will freeze AutoCAD. I will have to conduct a force shutdown than restart the program.
My question is; where do I start to determine what is the cause? Where do I find an error log?
In the model space there is the "ZoomCube" and there was a "Zoom" object there as well. Somehow I turned it off. I can't find a way to turn it back on. Can't seem to find the documentation for the same.
My computer crashed and had to reinstall everything, well almost everything, still re-installing. The issue that I am having is the Instant Project-Wizard button/icon, that is suppose to be located above the Timeline is not being displayed. This applies to both programs, VideoStudio X4 & X5 versions.
I followed the upgrade procedures and the projects appear in the projects list but they are empty once I enter them.I noticed a workspace icon appears next to the edit button the first time a try to launch a project. See attached screenshot. The only choice there is workspace.
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
Just installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
My AutoCAD Architecture 2011 program is missing the button to export to an earlier version of AutoCAD. I have seen this button on other computers at our office. I need to export some drawings to earlier versions without having to bind exrefs and do a 'save as' earlier version.
How I can get this button back? Does it have anything to do with DWG Trueview?Here are two screen shots, one with the button, and one without.
