Just installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
View 2 RepliesAll of a sudden I see that within my Inventor the vault Collaboration ribbon has disappeared. How do I bring this back?
C1
Inventor Professional 2013
Vault Collaboration 2013
Since yesterday The vault ribbon is missing in Inventor 2014 and also add ins are grayed out(not loaded).
win 7 x64 system?
The icon dispayed on the ribbon for my addin seems to be the large (32x32) icon and i'm not sure how to fix that.
In IV2012 it was fine and i can't find anything in the programming that suggests anything was changed.
Using IV2014 Pro SP1 update 1, Win7-64bit
When I open up Inventor 2014 the Vault tab is visible in the ribbon; however, when I create a new file (of any type) the vault tab disappears from the ribbon. I can retrieve it by right clicking on the ribbon, clicking ribbon appearance and selecting reset ribbon. This fix is only temporary because if I close out Inventor and re-open it I must go through the same steps to retrieve the Vault tab in the ribbon. Any way to make it stay in the ribbon so I don't have to reset the ribbon every time?
After digging a bit more I came across the answer: [URL]....
I am very new to Autodesk products, I never used any of them before. I just purchased a student license and I downloaded Inventor Professional. This is the 2013 version, 64 bit edition. I also downloaded Vault Basic 2012.
I am trying to learn how to use these tools and one step in this process is to map the working folder in Inventor to Vault so files can be checked in and out, so I created a new vault, added users and groups, and that went without any problem.
Then, in Inventor I log in to this new vault. All the other buttons, (Open, Place, Check In and Check Out) are grayed out at this time. Reading the literature, I got the instructions to click on the Vault ribbon in Inventor, then on Access and "Map Folders". But at this point I cannot proceed because this menu item is grayed out as well.
I have noticed today that my Vault ribbon is not working. I can log in / log out of the Vault and navigate to the Vault explorer. Also in the browser I only have access to model and favorites. It acts like the Vault project is not active.
The project file is active and mapped properly and I can check files in and out via the Vault explorer. I have also installed updates dl19384851 and update 1 for Inventor.
I am running Windows XP Pro x86 & Vault Professional.
I'd like to insert an adjust image tool on image context ribbon.
Civil 3D (2013)
Is there an easy way to ensure the Vault ribbon/addin loads within Inventor 2011?
AutoCADM 2011 SP2
XP 32-Bit SP3
i have aprblem with the main icons of the ribbon, i install the program and it works correctly Suddenly the user interface converts to the normal autocad i tried to restore the ACAD.CUIX and doesn't work.
i have Win8, the version i have of the program is 2014 and the problem also happen on autocad architecture.
I have problem visualization icon ribbon in PDS 2012.How can restore ?
View 1 Replies View RelatedI need to create a section of a 3d model. Unfortuntaly the layout tab I need is missing. Normally if somthing is missing I type 'CUI' and then click Ribbon>Tabs> select the one I want and drag it to 'Workspaces Contents' - 'Ribbon Tabs'
The ribbon tab for layout is missing from the cui. See attached images.
How can I get the Layout Ribbon Tab back quickly?
Tutorial I am trying to follow; [URL] .......
I am using a full version of 2014 plain vanilla AutoCAD. More recently I have had the utility panel (that contains MEASUREGEOM) and the export panel pulled down in the work area for ease of access. The utility panel has disappeared completely, and sometimes I find the export panel hiding on the far right side of my screen with just a little bit of it sticking out. I right click on the the home tab and open "show panels" and I don't even see the utilities panel as an option to check or uncheck. I wonder if the utility panel is hiding beyond my screens view, but am unsure how to easily explore this possibility.
View 2 Replies View RelatedI just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.
What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack.
In the process of migrating from 2010 to 2013, all seemed okay at first. Now when I open 2013 i have no ribbon and my keyboard is no responding to shortcuts. For example in 2010 is used the keyboard i key to insert blocks.
View 7 Replies View Relatedi miss my "create view" etc. buttons in my layout ribbon. Where can i find an option to make them visible?
View 4 Replies View RelatedI am looking to import an Inventor file and create views of it in AutoCAD 2013, However this is what appears under my Layout ribbon.
View 9 Replies View RelatedA customer has a problem with the add-in of Vault in Inventor. Log In and Log Out options are lost as shown in the picture. The machine already formatted and installed applications again but the problem continues.
View 9 Replies View Relatedsystem info: win8 64bit, autocad 2013 64 bit,
if open autocad program first, every thing is fine , ribboon is working good. but if derictly open a .dwg file when autocad is not running, the ribbon panel is gone, i tried every method i can find -- reinstall, repair install, type "ribbon" command, reset cui, swich to other worksapce then swich back--- but the ribbon just don't come back.
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
Theres no text on the ribbon bar. So far, I have tried switching from classic to ribbon UI, changed the font size from the application options, reinstalled and uninstalled twice, cleaned my PC of registry errors, system restored to the time i didnt have this problem.
View 3 Replies View RelatedI recently installed Vault pro 2013. I was running Inventor 2012 at the time.. My vault add-in stopped loading. I installed Inventor 2013 and the vault add-in still won't load. I've gone to the Add-in manager 2013 and set it to loaded. I hit the "OK" button and nothing. Open the manager up again and it says "unloaded". Something is going on that is not allowing my vault add-in to load.
View 1 Replies View Relatedi opened inventor pro 2012 and my interface is different and my ribbon is missing. i tried restarting a number of times with no change. I tried a repair with no change. I might try a reinstall.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
Does Inventor Pro 2013 works with Vault Pro 2012.
View 1 Replies View RelatedI am getting the attached error when trying to check in an assembly and idw. The Vault is pointed to the C drive, so I'm not sure why it isn't finding the files within the C.
View 3 Replies View RelatedComputer: Dell Optiplex 790, Intel i5-2400 - 3.10 GHz, 8 GB RAM, NVidia Quadro 600 video card, Windows 7 - 64 Bit
Vault: Files are not displayed if opened in Detail view. Must go to the Incon view to display files. Then, switching back to Detail view, file (Vault) status is not shown. If click "Get/Check IN" on file, Vault will crash and shut down. More recently, an HTTP 404: Not Found error appears when clicking on files - may disappear after a wait or clicking on the file repeatedly.
Inventor: Cannot access any files through the Vault tab - Inventor crashes and shuts down. If file opened from Vault instead, it will open and can be saved, checked In/Out.
All of this started a couple of weeks ago shortly after installing Windows Updates. It occurs only on my machine. No other Vault/Inventor user is having any problems. Two IT techs spent a week trying to solve the problem. The only solution was to unistall and reinstall everything including Windows 7. It worked great for a week until another Windows update was installed - now back to the same problems.
I have installed Inventor 2013 on a machine just so that I can use this machine to migrate my files using the Autodesk Task Scheduler. I started the TS, then Create Task>Migrate Files task. I selected my "Vault" project and get a message that says "Vault Projects not supported".
I noticed that in the Migrate Files dialog, there is not a box at the top that says "Migrate from Vault".
This is installed on "Windows Server Standard x64" OS.
I tried a repair install and Reinstall on the Inventor 2013 installation. Problem still persists.
I was getting this error on one of my users machines, inventor 2013 vault add in could not find the data management services
I uninstall Vault workgroup 2013, Inventor 2013, re install, and re install add ins, worked for half a day, and just got the same error again,
it seems As Inventor looses the add in, what was intersiting it gave an error about some unerlaying error after disgarding that, the add in doesnt work anymore.
I also cant copy design from vault on the same machine, all Inventor related files cant be copied, but dwg files can.
I get the feeling its an Inventor issue, my last resort is a clean install.
Can I disable ribbon in 2013?
View 1 Replies View RelatedI've just been messing about with the ribbon in Civil 3D 2013 and managed to create my own tab and add a panel with 3 rows. In one of them i have added the command BATTMAN. I've obviously added an icon and used button style 'Large with Text (Vertical)'.
I've noticed that on other buttons with longish names under them have wrapped text. How do i achieve this so say 'Block Attribute Manager' text would appear stacked under the button?
We just upgraded to 2013 software and anytime i change the ribbon to anything besides the default Inventor crashes.
View 9 Replies View Related