AutoCAD Architecture :: Project Browser Icon Missing (2013)
Sep 18, 2013
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
View 4 Replies
ADVERTISEMENT
Sep 9, 2011
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies
View Related
Jan 16, 2013
how can i open the project browser and properties box in revit 2013. they just disappeared.
View 3 Replies
View Related
Jul 20, 2012
For some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
View 1 Replies
View Related
May 4, 2012
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
View 1 Replies
View Related
May 4, 2012
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
View 3 Replies
View Related
Feb 6, 2012
I've just downloaded the student revit-architecture, however even after reinstalling I cannot find the elevations in 'Project Browser'. I only have floor plans and ceiling plans. Is it hidden somewhere?
View 7 Replies
View Related
Jun 7, 2011
I've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
View 2 Replies
View Related
Jan 11, 2013
I was working on a project adding topography and trees when revit crashed. I saved a recovery file which i then opened and saved over the old file. what I hadn't noticed was the the defaut site view in the project browser had gone missing. how to recover this view / plan which shows the topography, origin point and survey points etc?
View 1 Replies
View Related
Apr 17, 2012
Just installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
View 2 Replies
View Related
May 14, 2012
How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
View 3 Replies
View Related
Sep 22, 2011
how to add custom browser views to the project browser window. See the attached image
View 1 Replies
View Related
May 6, 2013
finally I got my express tools ribbon but a lot of commands are missing....REDIR for example....
Don't tell me to reinstall AutoCAD Architcture because I already did it twice!
Don't tell my to select the acetmain.cuix by CUILOAD...because..
I also tried the menuload and the appload command but won't load every single lisp routine
from the express folder...can you imagine how many lisp routines the Express Folder has....
AutoCAD Architecture hasn't got such problems with Express Tools.....
View 6 Replies
View Related
May 22, 2012
I am attempting to update a section and the program hangs at message "Missing double in restore file". this is becoming critical for a particular project
View 1 Replies
View Related
Jan 26, 2014
I am using Autodesk Revit Architecture 2013. I am using mirror project from the manage pulldown under position. I have used this tool many times in the past with success. This particular home is an average size two story. The file is about 40Mb. I tried flipping the home and Revit gets to about 29% and stopps. I let it run for an hour over lunch, even over night and no luck. I tried the same house on another computer running Autodesk Revit Arch. 2013 and it did the same thing.
I tried purging the file, I made sure nothing was locked, I even got rid of my grouped items. I tried copying the plan into another "fresh" file with nothing extra (like title blocks or other families).
I do have some floor framing shown in this plan. I used structural 2x10s to produce the framing (I did try getting rid of the framing and it didnt work). I tried turning off the roof lines (it has about three reverse gables) and nothing.
View 8 Replies
View Related
Jan 29, 2013
The content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
View 1 Replies
View Related
Nov 13, 2012
is it possible to change browser folder icon?
View 7 Replies
View Related
Dec 6, 2011
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies
View Related
Dec 21, 2012
How can I change the default icon that shows up in the browser node in a part file? I found some VB code but can't seem to get it to work with ilogic.
View 7 Replies
View Related
Jun 10, 2013
But is there a way to get an image icon in the project list? I have a lot of projects and descriptive names only go so far with me. A little image next to each one would jog the memory. Rather than plod through a bunch looking for the right one.
View 5 Replies
View Related
Jul 17, 2013
I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
View 2 Replies
View Related
Nov 21, 2012
I can't get the content browser. I tried all keys (Ctrl+4, Ribbon,Tool) nothing works even after a complete shut down and a restart.
View 1 Replies
View Related
Feb 9, 2009
I just installed Autocad Architecture 2009 on a new computer. Content Browser will not open from the drop down menu or from the Start menu. I have now uninstalled Autocad Architecture 2009 and all Autodesk applications, deleting all folders and autocad registry folders then re-installed with no sucess. Everything else seems to be working fine.
View 6 Replies
View Related
Apr 23, 2012
When working in an assembly model or part my 'find in browser' command has disappeared under the right click menu - why and how to retrieve it?
Inventor Professional 2013.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 7 Replies
View Related
May 11, 2006
My co-worker is working on his first Inventor project and he opened up Inventor 11 this morning and both his panel and browser bar are no where to be seen - yet checked off in the options as visible? What is the problem and how do we fix it. He used it two days ago and everything was fine.
View 7 Replies
View Related
Jun 20, 2013
I just opened two separate projects in Revit Architecture 2014 and the Properties window and the Project Browser Window will not dock. When I double click on the top tab of each one, it will expand in width to the full width of my screen. I recently upgraded from 2013 to 2014. Is this a 2014 glitch?
View 9 Replies
View Related
Oct 4, 2013
I have created new levels e.g T.O.F. & T.O.G. but they will not show up under the existing Floor Plans section in the Browser. All I get is a new section Titled: ???! How do I get these new levels to show with the rest of my levels under the floor plans category. Using Revit Ultimate 2014.
View 2 Replies
View Related
May 3, 2013
Having just download a free trial and being very new to revit--I notice when I open revit and the project I have been working on I can see faintly and briefly the properties and project browser box but they disappear as it's opening and I cannot figure out how to get them on my screen.
Did I hide them somehow with out realizing it? Where do I go to get them back on my screen again?
View 1 Replies
View Related
Feb 17, 2014
Using Revit 2014 SP2 64bit / Windows 7
Worksharing enabled project. When I delete anything from the browser; views, family types, families, Revit crashes. Was able to delete views such as sections by finding and selecting section tag within plan and deleting within view, but deleting same instance from project browser crashes Revit. Deleting types within 'purge unused' dialog does not result in crash also.
Have reset registry values for Current User, confirmed SP2 install, confirmed Hardware Acceleration is turned off. Still crashing.
View 7 Replies
View Related
May 3, 2013
I am attempting to learn revit via the on-line tutorials. I have figured how put in walls, doors, and furniture. I would like to do some elevation work and I notice I have no project browser.
How do I bring up the project browser?
View 2 Replies
View Related
Oct 4, 2011
I'm not sure what happened but all of a sudden when I try to open an existing drawing it no longer pops up a box to browse, it asks me in my command bar at the bottom to type in the name of the drawing. The same thing happens when I try to "save as" a drawing... How to get this back to normal?
I have attached a Jpg of both instances...
View 1 Replies
View Related
