I've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
View 2 RepliesI just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
Still there is no 'refresh' option...???
We use AA in the office but we have one version of autocad straight on a laptop. How can I get a tool palette we created in AA into autocad? I understand in AA that you use the content browser in AA to export a palette group but then how do you actually get that into Autocad for use? I think autocad uses an atc file or something like that.
Also, when trying to export the tool palette in AA using the content browser, the help file said I should be able to grab the tool palette and slide/ copy it into the new cataloque I created in the content browser. However, eveytime I grab onto the tool palette, the content browser woudl disappear. I finally just selected all of the items in my tool palatte and copied/ pasted them into the category folder I created within the new catalogue.
The content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
I can't get the content browser. I tried all keys (Ctrl+4, Ribbon,Tool) nothing works even after a complete shut down and a restart.
View 1 Replies View RelatedI just installed Autocad Architecture 2009 on a new computer. Content Browser will not open from the drop down menu or from the Start menu. I have now uninstalled Autocad Architecture 2009 and all Autodesk applications, deleting all folders and autocad registry folders then re-installed with no sucess. Everything else seems to be working fine.
View 6 Replies View RelatedI am using the 'Room tag with Dimensions' from the Content Browser. When it comes into the drawing, the room name is not centered above the rest of the tag text. So, I opened the block and moved the text and then saved the block. When I go to use the tag again - it tags everything - walls, doors, windows, etc...
Also, the drag and drop function does not work well - I have to drag a tool several times into the drawing from the content browser in order for it to work..
My content browser doesn't have the original options it used to have, instead it has a customized version. But the customized version does not have anything in it. How do I get it back? No matter where I search in CAD or in my files I can't find the original. Do I have to uninstall and install the program again?
View 2 Replies View RelatedAutocad Architecture 2014
My content browser is being finicky. The palettes are there, I can select the I-drop but when I release the dropper in my file, nothing happens, no error, no content???
Is it possible to unload and reload just the content browser?
I have used the Content Browser sparsely in the past to drag and drop items to a tool palette....but I was thinking it may be a go location to manage our detail library....
As a test i had tried to drag or copy past autocad details into the content browser with no success. I suppose there is a process to make linework usable for the content browser.
Do i need to convert the linework into a multi-view object and then drag it from the style manager into the content browser?
Thumbnail icons ( iDrop) not displayed within content browser catalog, why is this?
View 1 Replies View RelatedHow to create a tag and add it to my tool palettes for future use?
I am using AutoCAD Architecture 2012, and I want to be able to tag the bottom elevation of slabs in my drawings. I found I can create a tag by using the DEFINETAG command and I created text in there that is set to display the bottom elevation of slabs. I'm stuck as to where to go from here. I can't actually "tag" anything with this, and I don't know how to add it to my tool palettes.
When I start AutoCad and also if I try to select the Refresh icon on the Pallett, I get a pop up that says "There was an error while refreshing. The palette could not be refreshed" Could there be a path that is broken, if so where would it be?
View 2 Replies View RelatedJust on to ACA 2014 and noticed many of the detail tabs missing. No longer interior, exterior, etc. tabs and can't find how to replace them. Also Detail compnent manager toolbar icon gone and can't find command in CUI?
View 9 Replies View RelatedI have imported atc files which were created in standard AutoCAD 2010, the palettes (atc) files import without a glitch the tools contained on them work perfectly. However adding new items fails despite all files not being read only also if a add a new palette nice though AutoCAD ADT will create one it wont actually allow me to add anything to it...
View 2 Replies View RelatedI have a problem with scaling and rotation when I apply one tag coming from palette tool. I use ACA 2013 METRIC and this problem did not exist in 2012.
I attached a file to do the test. Drag the tag to your tool palettes in space and try to apply the design to see the problem.
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View RelatedI've been using the design group in the tool palettes, and adding my own tool palettes as I create them.Today I login and see that my tool palettes is not docked to the left side of the screen anymore.So I push CTRL-3 to bring it back up.The tool palettes that I see there are the "All Palettes" group.
I cannot choose the design group, document group, detailing group, or the visualization group. They are not even selectable in the right click menu of the tool palette bar. But when I customize palettes the 4 groups show up there, but they are useless.And not even all the tool palettes are there. "Design" is missing, Windows, Doors. Any way of getting my palette groups back to the way it was before, other than re-installing autocad?
Got a problem with tool palettes ever since ACA 2012. When ever I start ACA, I have to push cntrl+3 to show the tool palettes. It's starting to get anoying that I have to do this, and I can't find any setting that will let the tool palettes display on startup.
View 7 Replies View RelatedI recently added a block ( by dragging & dropping from our dws block library file) to our shared Tool Palettes. The block showed up properly on everone's computer the day I added it. However each morning when we restart our computers the block is no longer on the palette and I have to redrag & drop it. I thought that prerhaps I needed to export the updated toolpalette, but when I go to the customize tool palettes dialog box and right click on the toolpalette I don't see the export or import options. I am at a loss. We are using AutoCAD Architecture 2013
View 1 Replies View RelatedI've got a user in our office w/ tool palettes that will not float, move, minimize. They are locked in place. They will open/hide, but I don't have the ability to click on them and move them.
View 3 Replies View RelatedACA 2012
What's the best way to share tool palettes within an office?
I do it through profiles: I Created an 'office' profile (.arg) that I eventually share with every employee in the office. Whenever I add things to the tool palettes, I simply create a new profile for every user.
However, lately not every palette gets transferred. I've done a major reorganisation of the office tool palette and only a very small amount of palettes actually get transferred.
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
have the problem of the Tool Palette not staying docked when you shut down ACA 2012? I have to reload it every time.
View 8 Replies View RelatedI am using Autocad 2011 just download it and its all perfect if you consider that I was stuck with 2008 before...
My problem is that I m creating objects from the tool palette (doors, windows, walls) and I cant change their material..
We are working on drawings saves as 2004 format from 2010. With ADT2006 I can't use the tool palettes or the fillet command. Is there a way to work around this problem?
View 2 Replies View RelatedI am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.
I just made myself another toolpalette, and the icons/images don't show up.Well, none of the icons/images show up except for the Junction Box (J with a circle around it.)I found that the Junction Box block is the only one that is NOT Annotative. All the other ones are ANNOTATIVE (as they should be.)
In Windows Explorer, it looks like images were saved for each new block I inserted into the toolpalette, but the images are blank except for the Junction Box of course. Is there a special way you have to put your Annotative blocks into a toolpalette so the icon/image shows up??
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View RelatedI want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.
Is there a way to copy these tools into another profile? Even if I over-right another palette?
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.