AutoCAD Architecture :: How To Get Old Custom Tool Palettes Into 2012 By Opening Content Browser
Feb 7, 2012
I just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
Still there is no 'refresh' option...???
View 2 Replies
ADVERTISEMENT
Jun 7, 2011
I've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
View 2 Replies
View Related
Jan 24, 2012
When I try to import my custom tool palettes onto my co-workers computer, his machine does not see the xpg.
My machine is a 64 bit computer and his is a 32 bit.
Is there a way to convert the xpg to a different extension or will I have to set up his palettes from scratch?
View 2 Replies
View Related
Apr 8, 2011
have the problem of the Tool Palette not staying docked when you shut down ACA 2012? I have to reload it every time.
View 8 Replies
View Related
Nov 14, 2011
I am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.
View 2 Replies
View Related
Dec 13, 2011
We use AA in the office but we have one version of autocad straight on a laptop. How can I get a tool palette we created in AA into autocad? I understand in AA that you use the content browser in AA to export a palette group but then how do you actually get that into Autocad for use? I think autocad uses an atc file or something like that.
Also, when trying to export the tool palette in AA using the content browser, the help file said I should be able to grab the tool palette and slide/ copy it into the new cataloque I created in the content browser. However, eveytime I grab onto the tool palette, the content browser woudl disappear. I finally just selected all of the items in my tool palatte and copied/ pasted them into the category folder I created within the new catalogue.
View 1 Replies
View Related
Jan 29, 2013
The content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
View 1 Replies
View Related
Nov 21, 2012
I can't get the content browser. I tried all keys (Ctrl+4, Ribbon,Tool) nothing works even after a complete shut down and a restart.
View 1 Replies
View Related
Feb 9, 2009
I just installed Autocad Architecture 2009 on a new computer. Content Browser will not open from the drop down menu or from the Start menu. I have now uninstalled Autocad Architecture 2009 and all Autodesk applications, deleting all folders and autocad registry folders then re-installed with no sucess. Everything else seems to be working fine.
View 6 Replies
View Related
Oct 12, 2011
I am using the 'Room tag with Dimensions' from the Content Browser. When it comes into the drawing, the room name is not centered above the rest of the tag text. So, I opened the block and moved the text and then saved the block. When I go to use the tag again - it tags everything - walls, doors, windows, etc...
Also, the drag and drop function does not work well - I have to drag a tool several times into the drawing from the content browser in order for it to work..
View 2 Replies
View Related
Dec 1, 2011
My content browser doesn't have the original options it used to have, instead it has a customized version. But the customized version does not have anything in it. How do I get it back? No matter where I search in CAD or in my files I can't find the original. Do I have to uninstall and install the program again?
View 2 Replies
View Related
Jul 11, 2013
Autocad Architecture 2014
My content browser is being finicky. The palettes are there, I can select the I-drop but when I release the dropper in my file, nothing happens, no error, no content???
Is it possible to unload and reload just the content browser?
View 5 Replies
View Related
Aug 5, 2011
I have used the Content Browser sparsely in the past to drag and drop items to a tool palette....but I was thinking it may be a go location to manage our detail library....
As a test i had tried to drag or copy past autocad details into the content browser with no success. I suppose there is a process to make linework usable for the content browser.
Do i need to convert the linework into a multi-view object and then drag it from the style manager into the content browser?
View 2 Replies
View Related
Jul 26, 2012
Thumbnail icons ( iDrop) not displayed within content browser catalog, why is this?
View 1 Replies
View Related
Mar 29, 2012
I use ACA 2012 on two seperate computers and would like to be able to have all my custom tool palettes, blocks, customizations, etc.. to migrate to both computers. I.e. I add a new tool to a tool palette on one computer and then when I'm working on second computer that new tool appears in palette in correct location. I would think the easist way to do this would to be to share the location of the tool palettes, customization files, etc.. at a common place (network share) but am unable to find all the files and settings to do this.
View 1 Replies
View Related
Aug 23, 2011
I have a custom tool palette all made up, it has three palette sets and 8-12 palettes per set.
Now, is it necessary to add the palette sets and palettes to the content browser before sharing the .atc file around the office? Also, once added to the content browser, I cannot change the properties of a block e.g. scale, layer, rotation prompt etc..
View 1 Replies
View Related
May 4, 2012
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
View 3 Replies
View Related
Apr 12, 2013
How to create a tag and add it to my tool palettes for future use?
I am using AutoCAD Architecture 2012, and I want to be able to tag the bottom elevation of slabs in my drawings. I found I can create a tag by using the DEFINETAG command and I created text in there that is set to display the bottom elevation of slabs. I'm stuck as to where to go from here. I can't actually "tag" anything with this, and I don't know how to add it to my tool palettes.
View 2 Replies
View Related
Dec 18, 2013
When I start AutoCad and also if I try to select the Refresh icon on the Pallett, I get a pop up that says "There was an error while refreshing. The palette could not be refreshed" Could there be a path that is broken, if so where would it be?
View 2 Replies
View Related
Apr 25, 2013
Just on to ACA 2014 and noticed many of the detail tabs missing. No longer interior, exterior, etc. tabs and can't find how to replace them. Also Detail compnent manager toolbar icon gone and can't find command in CUI?
View 9 Replies
View Related
May 27, 2013
I have imported atc files which were created in standard AutoCAD 2010, the palettes (atc) files import without a glitch the tools contained on them work perfectly. However adding new items fails despite all files not being read only also if a add a new palette nice though AutoCAD ADT will create one it wont actually allow me to add anything to it...
View 2 Replies
View Related
Apr 23, 2013
I have a problem with scaling and rotation when I apply one tag coming from palette tool. I use ACA 2013 METRIC and this problem did not exist in 2012.
I attached a file to do the test. Drag the tag to your tool palettes in space and try to apply the design to see the problem.
View 2 Replies
View Related
Mar 27, 2012
So I am trying to create a TP that has a few commands on it... the problem is I dont know where to start in order to make everything available to the others on my network...
I have created a new GROUP, dragged a palette into that group, made my commands, and they work on my PC... but how do I get them all so everone can see them. Exporting the "command tool samples" and importing it as "My layers" works, but the name is still command tool samples and breaks the actual command tool samples...
C3D 2010
View 3 Replies
View Related
Dec 16, 2010
I've made some custom tool palettes that are on the network. I just have them pathed in the options, and set up as a group for users to access. Civil 3D is real sluggish when it comes to using these, and switching between the tabs, and trying to load them up. But Vanilla AutoCAD loads them and switches between tabs no problem. Is there a variable specific to C3D that needs to change to make it work more like it does in Vanilla AutoCAD?
View 9 Replies
View Related
Jul 7, 2011
I've been using the design group in the tool palettes, and adding my own tool palettes as I create them.Today I login and see that my tool palettes is not docked to the left side of the screen anymore.So I push CTRL-3 to bring it back up.The tool palettes that I see there are the "All Palettes" group.
I cannot choose the design group, document group, detailing group, or the visualization group. They are not even selectable in the right click menu of the tool palette bar. But when I customize palettes the 4 groups show up there, but they are useless.And not even all the tool palettes are there. "Design" is missing, Windows, Doors. Any way of getting my palette groups back to the way it was before, other than re-installing autocad?
View 7 Replies
View Related
Aug 8, 2011
Got a problem with tool palettes ever since ACA 2012. When ever I start ACA, I have to push cntrl+3 to show the tool palettes. It's starting to get anoying that I have to do this, and I can't find any setting that will let the tool palettes display on startup.
View 7 Replies
View Related
Apr 19, 2013
I recently added a block ( by dragging & dropping from our dws block library file) to our shared Tool Palettes. The block showed up properly on everone's computer the day I added it. However each morning when we restart our computers the block is no longer on the palette and I have to redrag & drop it. I thought that prerhaps I needed to export the updated toolpalette, but when I go to the customize tool palettes dialog box and right click on the toolpalette I don't see the export or import options. I am at a loss. We are using AutoCAD Architecture 2013
View 1 Replies
View Related
Jun 24, 2011
I've got a user in our office w/ tool palettes that will not float, move, minimize. They are locked in place. They will open/hide, but I don't have the ability to click on them and move them.
View 3 Replies
View Related
Apr 16, 2012
ACA 2012
What's the best way to share tool palettes within an office?
I do it through profiles: I Created an 'office' profile (.arg) that I eventually share with every employee in the office. Whenever I add things to the tool palettes, I simply create a new profile for every user.
However, lately not every palette gets transferred. I've done a major reorganisation of the office tool palette and only a very small amount of palettes actually get transferred.
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
View 1 Replies
View Related
Mar 4, 2011
I am using Autocad 2011 just download it and its all perfect if you consider that I was stuck with 2008 before...
My problem is that I m creating objects from the tool palette (doors, windows, walls) and I cant change their material..
View 2 Replies
View Related
Aug 17, 2011
We are working on drawings saves as 2004 format from 2010. With ADT2006 I can't use the tool palettes or the fillet command. Is there a way to work around this problem?
View 2 Replies
View Related
