AutoCAD Architecture :: 2012 Tool Palettes - Unable To Execute
Nov 14, 2011
I am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.
View 2 Replies
ADVERTISEMENT
Sep 8, 2009
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies
View Related
Apr 8, 2011
have the problem of the Tool Palette not staying docked when you shut down ACA 2012? I have to reload it every time.
View 8 Replies
View Related
Feb 7, 2012
I just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
Still there is no 'refresh' option...???
View 2 Replies
View Related
Feb 3, 2012
I'm using autocad architecture 2010. When I click on the tool palettes like the steel command it is tell me. Unable to execute the tool. Unspecified error. How can I get the tool palette to work again?.
View 4 Replies
View Related
Apr 28, 2012
I have created a custom Assembly using Assembly Composer for C3D 2012 and imported it to C3D. Problem is when I try to place the assembly in a drawing.
I get the error message "Unable to execute the tool. Not enough storage is available to complete this operation."
I am trying to create an assembly that will calculate a built volume based on constructed height of the structure.
I have attached the PKT file.
View 3 Replies
View Related
Sep 28, 2012
I am creating new tool palettes for lab equipment blocks. I was able to create a new palette and drag and drop blocks into it. When I go to create other palettes I am unable to drag and drop blocks into them. I am able to drag and drop into the tool palette I previously created and then drag and drop into the new palette.
But when I shut off Autocad and reopen the new palettes disappear. How can I create a new tool palette and it works, then create other tool palettes and I can not drag and drop to it? I am using Autocad Architecture 2013.
View 4 Replies
View Related
Apr 12, 2013
How to create a tag and add it to my tool palettes for future use?
I am using AutoCAD Architecture 2012, and I want to be able to tag the bottom elevation of slabs in my drawings. I found I can create a tag by using the DEFINETAG command and I created text in there that is set to display the bottom elevation of slabs. I'm stuck as to where to go from here. I can't actually "tag" anything with this, and I don't know how to add it to my tool palettes.
View 2 Replies
View Related
Dec 18, 2013
When I start AutoCad and also if I try to select the Refresh icon on the Pallett, I get a pop up that says "There was an error while refreshing. The palette could not be refreshed" Could there be a path that is broken, if so where would it be?
View 2 Replies
View Related
Apr 25, 2013
Just on to ACA 2014 and noticed many of the detail tabs missing. No longer interior, exterior, etc. tabs and can't find how to replace them. Also Detail compnent manager toolbar icon gone and can't find command in CUI?
View 9 Replies
View Related
May 27, 2013
I have imported atc files which were created in standard AutoCAD 2010, the palettes (atc) files import without a glitch the tools contained on them work perfectly. However adding new items fails despite all files not being read only also if a add a new palette nice though AutoCAD ADT will create one it wont actually allow me to add anything to it...
View 2 Replies
View Related
Apr 23, 2013
I have a problem with scaling and rotation when I apply one tag coming from palette tool. I use ACA 2013 METRIC and this problem did not exist in 2012.
I attached a file to do the test. Drag the tag to your tool palettes in space and try to apply the design to see the problem.
View 2 Replies
View Related
Jan 24, 2012
When I try to import my custom tool palettes onto my co-workers computer, his machine does not see the xpg.
My machine is a 64 bit computer and his is a 32 bit.
Is there a way to convert the xpg to a different extension or will I have to set up his palettes from scratch?
View 2 Replies
View Related
Jul 7, 2011
I've been using the design group in the tool palettes, and adding my own tool palettes as I create them.Today I login and see that my tool palettes is not docked to the left side of the screen anymore.So I push CTRL-3 to bring it back up.The tool palettes that I see there are the "All Palettes" group.
I cannot choose the design group, document group, detailing group, or the visualization group. They are not even selectable in the right click menu of the tool palette bar. But when I customize palettes the 4 groups show up there, but they are useless.And not even all the tool palettes are there. "Design" is missing, Windows, Doors. Any way of getting my palette groups back to the way it was before, other than re-installing autocad?
View 7 Replies
View Related
Aug 8, 2011
Got a problem with tool palettes ever since ACA 2012. When ever I start ACA, I have to push cntrl+3 to show the tool palettes. It's starting to get anoying that I have to do this, and I can't find any setting that will let the tool palettes display on startup.
View 7 Replies
View Related
Apr 19, 2013
I recently added a block ( by dragging & dropping from our dws block library file) to our shared Tool Palettes. The block showed up properly on everone's computer the day I added it. However each morning when we restart our computers the block is no longer on the palette and I have to redrag & drop it. I thought that prerhaps I needed to export the updated toolpalette, but when I go to the customize tool palettes dialog box and right click on the toolpalette I don't see the export or import options. I am at a loss. We are using AutoCAD Architecture 2013
View 1 Replies
View Related
Jun 24, 2011
I've got a user in our office w/ tool palettes that will not float, move, minimize. They are locked in place. They will open/hide, but I don't have the ability to click on them and move them.
View 3 Replies
View Related
Apr 16, 2012
ACA 2012
What's the best way to share tool palettes within an office?
I do it through profiles: I Created an 'office' profile (.arg) that I eventually share with every employee in the office. Whenever I add things to the tool palettes, I simply create a new profile for every user.
However, lately not every palette gets transferred. I've done a major reorganisation of the office tool palette and only a very small amount of palettes actually get transferred.
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
View 1 Replies
View Related
Jun 7, 2011
I've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
View 2 Replies
View Related
Mar 4, 2011
I am using Autocad 2011 just download it and its all perfect if you consider that I was stuck with 2008 before...
My problem is that I m creating objects from the tool palette (doors, windows, walls) and I cant change their material..
View 2 Replies
View Related
Aug 17, 2011
We are working on drawings saves as 2004 format from 2010. With ADT2006 I can't use the tool palettes or the fillet command. Is there a way to work around this problem?
View 2 Replies
View Related
May 31, 2013
tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
View 3 Replies
View Related
Dec 6, 2011
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies
View Related
Feb 7, 2012
I want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.
Is there a way to copy these tools into another profile? Even if I over-right another palette?
View 6 Replies
View Related
Apr 18, 2013
I work on AutoCad 2012. I am trying to find the revision cloud & tag tool. I seem to only be able to place a revision cloud without a tag on the drawing. I don't see a tag option and searching for the option on the help menu has resulted in zero hits. Does AutoCad 2012 not offer this feature or am I looking in the wrong location?
View 1 Replies
View Related
Jan 15, 2013
I am running Inventor 2012 sp2.
Even with a simple IPT that only has a handfull of features, at times it takes a long time (3-5 minutes, sometimes longer) for Inventor to execute a undo or redo command.
Undo file size setting in Application options is set at 1MB (which is teh same setting I used in previous versions).
View 9 Replies
View Related
Oct 16, 2013
Just upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
View 2 Replies
View Related
Sep 2, 2013
I was installing my Express tools & somehow hit the unload button by mistake,now when i type Ribbon..It says no tabs or palets loaded.Which file do i have to Upload ?
View 2 Replies
View Related
Nov 5, 2007
When I add the hatch pattern to the tool palette and then try to use it, it defaults the boundaries add command to pick points. Is there a way i can have it default to select objects?
View 1 Replies
View Related
Dec 19, 2013
We have company tool palettes set up in catalogs on the server. I was able on "load and existing catalog" on a users machine this morning but when I try to drag and drop the catalog palettes to the tool palette, nothing happens. They don't populate the palette and they do not show up as an available tab under "customize".
View 2 Replies
View Related
Sep 14, 2013
After 20 years of using Autocad thought it time to get serious about putting all my symbolslocks on palettes. Went to design center, selected a folder and right clicked to get "Create Tool Palette of Blocks". Creates a black palettes but no block tools ?
All symbolslocks are individual files. I'm using ACA 2014.
View 4 Replies
View Related
