AutoCAD Civil 3D :: Custom Assembly Causing Error - Unable To Execute The Tool
Apr 28, 2012
I have created a custom Assembly using Assembly Composer for C3D 2012 and imported it to C3D. Problem is when I try to place the assembly in a drawing.
I get the error message "Unable to execute the tool. Not enough storage is available to complete this operation."
I am trying to create an assembly that will calculate a built volume based on constructed height of the structure.
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
I'm using autocad architecture 2010. When I click on the tool palettes like the steel command it is tell me. Unable to execute the tool. Unspecified error. How can I get the tool palette to work again?.
I am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.
I created a new version of DaylightBench subassembly with a different class library application on .net for c3d 2009.
I added the tool data to C3D Metric Transportation Subassembly Catalog.atc. Tool is listed on Subassembly catalog and i can copy-paste the tool to Tool palette.
But on tool palette when i try to drag it to drawing it gives the error "tool is not registered". error msg is attached.
can it be about the resource fileds on ATC file eg: resource="1302" or the new GUID values?
I have been away from PhotoShop for awhile and have not used CS3 for over a year. When I try to use the clone tool a pop up tells me unable to use tool due to a program error. How can I fix?
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
Whenever I hover over my guardrail Subassembly I created with SAC I get this error. It's tied to the Tooltip info because it only happens when they are turned on. I have written a lot of subassemblies with SAC and this is the first one with this issue. See video: [URL] .......
I saw other posts about similar errors recommending a repair, which I did try, to no avail.
AutoCAD Expert Elite AutoCAD Civil 3D 2014 Certified Professional C3D 2014 (SP1) Win 7 Pro, 64-bit
My program crashed and upon restarting it some settings have changed. The biggest change is that I am unable to select objects and then execute a command. What the program is doing is when I select the objects I want a particular command executed, it will de-select all of the object and then execute the command. I then will have to reselect my objects. This makes deleting line work a little mor inconvenient. What setting is this and where can I change it back.
So I am trying to create a TP that has a few commands on it... the problem is I dont know where to start in order to make everything available to the others on my network...
I have created a new GROUP, dragged a palette into that group, made my commands, and they work on my PC... but how do I get them all so everone can see them. Exporting the "command tool samples" and importing it as "My layers" works, but the name is still command tool samples and breaks the actual command tool samples...
I've made some custom tool palettes that are on the network. I just have them pathed in the options, and set up as a group for users to access. Civil 3D is real sluggish when it comes to using these, and switching between the tabs, and trying to load them up. But Vanilla AutoCAD loads them and switches between tabs no problem. Is there a variable specific to C3D that needs to change to make it work more like it does in Vanilla AutoCAD?
Has seen this error in the event viewer? We seem to get this with all drawings containing a Pipe Network?
The complete error is: Type=Error Source= AeccDbNetworkRule::runScript Description= Unable to run Macro: ValidateRule.
And this error repeats itself 253 times in this dwg. We do have the "Pipe Catalogs" on a network drive. But it's mapped as R:AutoCAD Civil 3DPipes Catalog and not a unc address. I don't know if this is a problem to worry about or not, but it's still annoying to get this many events in the Panorama.
Civil 3D 2012 Windows 7 Pro (64bit) Intel Xeon W5580 @3.20GHz 12gig RAM NVIDIA Quadro 600
The measure tool is not giving me the correct measurement. For example, I offset a line 24' and when I go to double check the distance it is off by .03. That is starting on the original line and doing a perpendicular snap to the other line. So I thought, wait a minute that can't be right, so I drew a line between the two lines and did an inquiry and it gave me 24'.
I also did a dimension which also was correct. I also measured a 97' line and it was off by 3 feet. Never had issues with previous versions of Autocad as far as measuring.
I am trying to run a parcel area report generator, and I get the above error message, along with the path xslParcel_Area.xsl and an advisory to reinstall the program.
I think it is pointing to the full path location of C:ProgramDataAutodeskC3D 2012enuDataReportsxsl.
The file (Parcel_Areas.xsl) exists in this location.
NONE of the parcel reports that I tried to execute work - they all return the same grammtically painful error message.
How can I remove libraries without causing Load Stream Error. Should I delete all the contents first? I have created several libraries for my individual projects but whenever I have finished with one and try to remove (delete) it I get this error message and have to reset to factory defaults. This means losing the libraries I still want to use.
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit) Adobe Illustrator CC 17.1.0 (64 bit)
when i try to use marquee tool by clicking on it Photoshop cs6 closes or I see an error message and then it closes? text tool causes the same problem? im using xp sp3.
Why does the color look strange, is it only because it's green? I have it set to custom color>green because no color/black was only grey. This is still desaturated & very grey. Playing with the settings didn't seem to work.
What's with the pixelated edging? It's an inner bevel & appears on the rounded parts.
When I drag a previous custom command into an existing custom tool bar and edit the custom command (then rename the command in the Name and Command Name) it also changes the previous custom command that I originally drug into the toolbar. What am I doing wrong?
We have a work station with C3D 2013 that has started crashing when trying to open the pipe network vista. We have to edit the pipes using pipe properties for the individual pipes. This makes it difficult when trying to edit a large network. The drawings work fine on other computers. It has something to do with the settings on this machine. What would be causing the crash when trying to open the vista window?
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
When I use ImportSubassembly API to import my subassembly created by Autodesk Subassembly Composer into my civil project, it reports error-"eFilerError".
I crop a picture and when I print it white lines appear on the print . When I print the uncropped version of the same picture I get no lines . How can I get it to stop.
What is causing my EG Data Reference Surface to disappear on screen and Profile goes to crap? I've noticed this twice on same project in separate drawings. If I go to Toolspace and synchronize then it appears back on screen.
First dwg: I created a Pump Station Site Plan and data referenced in my surface and pipe network. I save and close then reopen and EG is gone until I synchronize.
Second dwg: I created a Railroad Crossing Exhibit showing plan and profile. I data referenced in my surface and pipe network. Same thing...save, close, reopen and I have to synchronize it to have plan and profile to appear ok.
This isn't good when I have .dsd files that I typically plot my drawing package from. I sent multiple sets of drawings to the plotter and all my Pump Station Site Plans were missing the surface contours. For this sheet, I had to synchronize and send separate plots just to have contours appear.
