AutoCAD Civil 3D :: Custom Sub-assembly Codes

Jul 21, 2013

custom sub-assembly codes,I have gone through the list of codes that is given in the code list.

1. How do I add new code, should I just add with the new index at the end

2. What all things I need to update so correct feature line is picked, etc

3. Any c# example of building a sub-assembly using .net.

View 2 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: How To View Codes Of Assembly (not On Composer)

Jun 19, 2013

I'd like to view the point codes (and also the links and shapes) of an assemby I have on my c3d drawing.I dont see nothing to get it ....

Civil 3D (2013)

View 4 Replies View Related

AutoCAD Civil 3D :: Assembly Point Codes Not Shown In Section Views?

May 10, 2012

I have a problem with point codes in section views in civil3d 2013. They are not showing at all. Drawing was made in civil3d 2012 and all point codes with defined styles were displayed correctly in section views and now they are all gone. Just link codes are shown. Is there something in setup of code styles that has to be changed?

Even if i set up new code and new label style it does not show up in section view after rebuild. Just in assembly.

If i do the same for link label it does show both in assembly and in section views.

View 1 Replies View Related

AutoCAD Civil 3D :: Proposed Surface Not Linking To Correct Codes Of Assembly In Corridor

Nov 20, 2013

When I paste the proposed surface with the corriodor surface and I check the profile the proposed surface ties to the bottom of the kerb ignoring the footpath.Also in the same drawing file I can't seem to export it to ACAD.

View 1 Replies View Related

AutoCAD Inventor :: Rotate Assembly Drawing Using Vba Codes?

Jan 10, 2012

how to rotate an assembly drawing using vba codes?

View 4 Replies View Related

AutoCAD Civil 3D :: Custom Assembly Causing Error - Unable To Execute The Tool

Apr 28, 2012

I have created a custom Assembly using Assembly Composer for C3D 2012 and imported it to C3D. Problem is when I try to place the assembly in a drawing.

I get the error message "Unable to execute the tool. Not enough storage is available to complete this operation."

I am trying to create an assembly that will calculate a built volume based on constructed height of the structure.

I have attached the PKT file.

View 3 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Point Codes And How They Are Used

Nov 5, 2012

I need to make them my best friend because the Subassembly Composer is basically useless unless you use the proper point coding for your SAs. This I know... I've attached an image from the Autodesk file that shows multiple point codes per link and point for the DaylightStandard Civil 3D Stock SA.

Which point codes must I use in my subassemblies to ensure I can create corridor surfaces properly down the road? For example the DaylightStandard SA shows...

P3 shows: Ditch_Out, Hinge, Hinge_Cut
P3 also shows: Daylight, Daylight_Fill 
P4 = Dayltight, Daylight_Cut

If I'm building something similar in the Subassembly Composer what the heck do I focus in on for my point code. I will have issues with my Corridor surfaces down the road if I don't do this properly up front. I've seen examples where the Input / Output Parameters you define a string for the coding, is this to apply multiple codes to a point or a link?

View 1 Replies View Related

AutoCAD Civil 3D :: Multiple Codes At 1 Survey Point?

Aug 2, 2012

It is my understanding that C3D will only display the first point when there's more than 1 code for a survey point.

My first thought was to copy the line in the PENZD txt file and edit so that there's only 1 code listed. I tried appending the point number with "A" and ".1" without luck I assume I would need to use the next available point number.

An example of my txt file is:

17371,298429.877,568639.651,801.030,LPM SGN     This produces only the light pole symbol and not the sign.

C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD Civil 3D :: Description Key Code For All Points Not Matching Any Other Codes?

Aug 18, 2011

We are using Civil 3d 2010.

In a description key code file, I would assume that a description key code of simply * would capture all points, but it seems this code gets ignored. How do we create a key code that captures all points?

For example, if I want to take advantage of the hierarchical processing of DKC files to assign layers, point styles, label styles, etc, I can theoretically create a 'design' DKC file that makes all points, regardless of their desciptions, to be sized relatively, and then move that DKC file to the top of the DKC file list.

I know this can be accomplished through the "_all points" point group, but I want to be able to control point layers as well, and as far as I know, neither point groups, point styles, nor label styles affect the insertion layer of a point, but DKC files do.

View 4 Replies View Related

AutoCAD Civil 3D :: Description Key Set - Hide Linework Code Set Codes

Aug 9, 2012

Can I use the description key set to not show point parameters with particular characters?I use the Linework Code Set codes to control survey figures and so the linework codes show up in the Raw descriptions. That's great for editing survey data.

But when the survey is passed on to the designers I want to show a full description that does not show the linework codes.For example when surveying a road culvert I will code the first point,

"CULV B 32 600" - (CULV is the code for culvert, B is to begin the figure, 32 is the culvert number and 600 is the diameter)

The second point is coded, "CULV 32 600"I want to show full descriptions of "CULV 32 600" for both points, ie I don't want a parameter that is a "B" to show up.Can I use the description key set to not show point parameters with particular characters?

View 9 Replies View Related

AutoCAD Civil 3D :: 2008 Surveylink - Does Not Recognize All Field Codes

Dec 2, 2007

We have been using Stringer Connect to convert our SDR files to RW5 then FBK, but have recently tried the Survey Link for Civil3D2008.

We use a field code "EC" for edge of concrete. Stringer handles this just fine, but whenever Survey Link sees EC it removes the code from the RW5 file, so we end up with points with no codes and no strings joining them.

View 2 Replies View Related

AutoCAD Civil 3D :: SAC - Hard Coding Link And Point Codes

May 28, 2012

How can you "hard code" a link code or point code into a subassembly?  I can use Input parameters to create the code, but then the user has the ability to change the code once in C3D?

how can you lock the name of a point or link code?

View 3 Replies View Related

AutoCAD Civil 3D :: How To Make Selection Set Filter For Cogo Points (DXF Codes)

Oct 10, 2013

I was wondering how to develop a Selection Set Filter that will select only Cogo Points? I know I need to use Dxf.Start as the code, but then what's the string associated with Cogo Points? Can't find any documentation on this or any Civil 3D-unique entities...I know Line is just "Line" and "Arc" is just arc...but Polyline is the unintuitive "LWPolyline" and "Cogo Point" isn't working.

View 5 Replies View Related

AutoCAD Civil 3D :: Change Codes For Corridor Section Points Report?

Nov 7, 2013

I would like to have my corridor section points report to have different labels for the points like Edge of Shoulder or EOP instead of labels like P2 and Hinge.  Is the only way to do this to somehow change the codes in the stock subassemblies? 

Civil 3D 2014

View 4 Replies View Related

AutoCAD Civil 3D :: Creating A Rail Sub Assembly In Sub Assembly Composer 2013

Jul 11, 2013

I thought I created a rail sub assembly.

So I created the rail sub assembly everything looks great in sub assembly composer.

Start a new dwg data reference in the rail alignment, Note the rail alignment type is set to rail.

Create an assembly and under the Construction tab for the assembly the Assembly Type is set to Railway. Attach my custom sub assembly to this assembly.

Created a corridor and I get this error: Something wrong with current subassembly: Operation is not valid due to the current state of the object. 

So I delete my sub assembly attach the Civil 3D Rail Single sub assembly. Re run corridor and everything works fine.

So I promote the alignment change type to centerline. Delete the Rail Single sub assembly put my rail sub assembly back. Rerun the corridor and everything works.

So then I undo everything up to the point of promoting the alignment.

Opened the base file changed the alignment type to centerline.

When I tried to synchronize the references I ended up a broken reference with the following error. Invalid reference. Synchronization failed

Not good we already have plan sheets cut.

where in sub assembly composer were do I define the sub assembly to be for Rail? 

View 2 Replies View Related

AutoCAD Civil 3D :: Adding A Sub-assembly To An Assembly?

Jul 19, 2013

I have a finished corridor, but now I need to add marked points to label a few key grade breaks in my cross sections.  When I attempt to add the marked points on some of my sub-assemblies it gives me the error that the sub-assembly is not part of the assembly.  I can right click the sub-assemly and choose "Add to Assembly" but when I rebuild the corridor it strips all the sub-assembly data from my assembly and leaves me with essentially a null assembly for the range.

View 4 Replies View Related

AutoCAD Inventor :: Change The Parameters Of A Custom Ipart Inserted Into An Assembly?

Sep 10, 2013

Is it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?

In that case I simply remove the previous occurrence and insert a new one I suppose?

View 1 Replies View Related

AutoCAD Inventor :: Change Custom Property Format From Assembly Level

Apr 8, 2013

I have a frame fabrication / assembly with a Custom iProperty called "FINISHED MATERIAL SIZE". I have set the following parameter for this property:

FINISHED MATERIAL SIZE = <Stock Number> x <G_L>mm

This returns the stock size and length to my drawing cutlist. The problem is that the <G_L> Parameter returns the trailing zeros and unit string.

I would like to set all the frame members in the assembly such that the G_L parameter returns a value rounded off to 0 decimal places with no trailing zeros and removes the unit string as well.

Is there a way I can achieve this from the assembly so I don't have to manually open each frame member and make the changes in the fx parameters dialog one at a time?

View 3 Replies View Related

AutoCAD Inventor :: Custom IProperties Not Updating In Drawing When Update Assembly Model?

Nov 19, 2012

I'm using Inventor 2011 and when I go to change parameters using iLogic in an assembly model, (sometimes it is a component suppression, other times it is an iPart component change) it won't update the associated drawing file. I need to go into the BOM on the drawing and renumber the balloons, or change something else in order for the custom iProperties to update in the drawing template. If I just change the iPart component, then the BOM doesn't need to update making the renumbering of balloons redundant.

I'm using iLogic to update all of the iProperties and component references, then reattach balloons. What I would like to do is automatically update the custom iProperties drawing template fields, and renumber the drawing BOM.

View 2 Replies View Related

AutoCAD Inventor :: Send Custom Properties From Selected Assembly View In Drawing To All Parts

Nov 4, 2013

I want to create a rule with CommandManager.pick who see the name of assembly and send a custom ipropertie to all parts of this assembly view in drawing, this is my none finish rule.

Dim doc = ThisApplication.ActiveDocument
Dim entity = ThisApplication.CommandManager.Pick(
SelectionFilterEnum.kDrawingViewFilter,
"SÉLECTIONNE UNE VUE")
modelName = IO.Path.GetFileName(ActiveSheet.View(entity.Name).ModelDocument.FullFileName)
PART = Left(modelName, 11)
EXT = Right(modelName, 3)
FIRST = Left(modelName, 3)

[code]....

I have the rule "SEND TO PARTS" in my assembly but i have this error message

MEMBER NOT FOUND. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND))

View 8 Replies View Related

AutoCAD Inventor :: ILogic To Trigger And Insert Custom Content Center Files To Assembly

May 9, 2013

I would like to know, whether is there is any ilogic option by which the Custom content center is triggered automatically to insert component in an assembly.

View 7 Replies View Related

Revit :: Custom Wall Assembly Tag?

Nov 1, 2013

Im working on creating all of our common AutoCAD annotation symbols in revit. 
 
For section details we use a wall asembly tag that wraps the thickness of the wall, and its set up so we pull the arrows to match the width of the assembly. (see attatchment)
 
Im struggling to find a way to make this work in Revit as well, either by automatically adjusting to the width of the assembly we are tagging, or even by just pulling the arrows like we did in autocad.

View 1 Replies View Related

AutoCAD .NET :: How To Make Codes Form VBA

Aug 3, 2011

I am new to VB.net and I just wondering if it is possible to use some codes that we use in VBA into VB.net , things like this .
 
Public Sub AddTheCircle() Dim p(0 To 2) As Double, r As Double p(0) = 10: p(1) = 50: p(2) = 0 r = 150 ThisDrawing.ModelSpace.AddCircle p, rEnd Sub

If not , so how to start with VB.net parallel to Autocad ?

View 7 Replies View Related

AutoCAD .NET :: MText Formatting Codes To VB String

Oct 16, 2012

I am lifting mtext from a drawing and then working with the result.  For some reason the "\pxi-" at the beginning of the string I am lifting is converting to " pxi-" when worked with as a string in vb.net.  The result is this, when I apply the string back to mtext I get a bunch of messed up formatting codes at the beginning rather than a formatted piece of text.

This seems to be related to the "\" Is this automatically getting modified by vb or autocad when I pull the source text?

View 3 Replies View Related

AutoCAD 2013 :: Application Defined Codes In Entities

Feb 14, 2013

I'm looking for a way to tag entities (for example arc) in a DXF with an numeric ID of my choosing. I've been trying to understand the DXF reference and find examples of how to do it, but there is not much information available. My interpretation of the standard is that I'm allowed to do this:

0
ARC
8
Layer1
10
-1.734315
20
-1.975000
40
0.300000
50
225.000027
51
270.000065
102
{MYAPPLICATION
2000
13
102
}

Where 2000 is my application defined code and 13 is my numeric ID value. Is this correct use of application defined codes?

View 4 Replies View Related

AutoCAD LT :: Won't Open - Internal Error Codes 2738

Aug 2, 2013

AutoCadLT 13 won't open, internal error codes 2738, won't reinstall or repair or uninstall and it started with the new service pack update.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: DXF Codes For Linetypes

Nov 7, 2012

How I can get the linetype dxf codes of a line that I select. I have tried a few different things and all I can get is the linetype name. I'm trying to write a Lisp program that draws a "template" and sets up the line types and layers etc. But I need to get this info from a current drawing so that I can put it into the program. So far the program works well, but if I take a new drawing and run the program, the line types will need to be set up and the colors on the layers. I don't think I'll have a problem with the colors as they are standard to Autocad, but the linetype used in the current drawing is "homemade".

View 5 Replies View Related

AutoCAD Civil 3D :: Transitions With Sub Assembly

Sep 13, 2013

There are been a few posts about transitions this week, so here is a simple little sub assembly (provided "As Is") that might work. It was build with Sub Assembly Composer 2014. The way it works it to calculate a number at a station based on a start and end value, a transition type and the station (chainage) value in relationship to the start and end points of the region. It has X transition types: Linear, Parabolic Out (rate of change increases) Parabolic In (rate of change decreases), Reverse parabolic (back to back), Bay Taper (from Caltrans this is a three part transition made of 2 parabolas and a linear section), Cubic Out and Cubic In.

The way it works is you insert the subassembly before a subassembly that you need to transition. You set up the start and end values and the type of transition to make. Then in the following subassembly you reference the value that is returned. For slopes, you'll have to input the values in decimal (4:1 = 0.25)

I've attached a drawing as well that shows a bay taper of a road from 12 to 24 over 120 and a daylight that goes from 1:1 to 4:1 and back around a curve (3 regions)

Autodesk, Inc.

View 1 Replies View Related

AutoCAD Civil 3D :: LaneInsideSuper For Assembly

Jan 3, 2014

I need to use LaneInsideSuper for my assembly, but I could not find it in the palettes of Civil 3D 2013.

It does show in the palettes of Civil 3D 2011. I was wondering if there is a way to copy that subassembly from 2011 to 2013?

View 2 Replies View Related

AutoCAD Inventor :: ASCII Characters / Correct Character Codes

Feb 13, 2012

I am quite conversant with Unicode keystrokes (Alt+XXXX) for most symbols in fact I have a cheat that aids me in the correct character code.If I don't have the code I just copy it from the character map and paste it into the sentence but it gets a little tiresome after a while searching the character map for symbols.

I have on numerous occasions lately had the need to to insert the 'THEREFORE' symbol (You know the 3 dots in a triangle) into text notes on my drawings.

This symbol only seems to have a code "U+2234"..I have spent a lot of time searching everywhere for a clue as to what this keystroke sequence means.

I have my font style set to "Arial Unicode MS". Looking for the correct keystroke sequence for "U+XXXX"?

View 1 Replies View Related

AutoCAD 2010 :: Enable MTEXT Background Using LISP And DXF Codes

Jun 27, 2012

Simple LISP routine to enable the background mask of a single mtext object using dxf codes?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved