AutoCAD Civil 3D :: How To View Codes Of Assembly (not On Composer)
Jun 19, 2013I'd like to view the point codes (and also the links and shapes) of an assemby I have on my c3d drawing.I dont see nothing to get it ....
Civil 3D (2013)
ADVERTISEMENT
AutoCAD Civil 3D :: Subassembly Composer - Point Codes And How They Are Used
Nov 5, 2012 I need to make them my best friend because the Subassembly Composer is basically useless unless you use the proper point coding for your SAs. This I know... I've attached an image from the Autodesk file that shows multiple point codes per link and point for the DaylightStandard Civil 3D Stock SA.
Which point codes must I use in my subassemblies to ensure I can create corridor surfaces properly down the road? For example the DaylightStandard SA shows...
P3 shows: Ditch_Out, Hinge, Hinge_Cut
P3 also shows: Daylight, Daylight_Fill
P4 = Dayltight, Daylight_Cut
If I'm building something similar in the Subassembly Composer what the heck do I focus in on for my point code. I will have issues with my Corridor surfaces down the road if I don't do this properly up front. I've seen examples where the Input / Output Parameters you define a string for the coding, is this to apply multiple codes to a point or a link?
AutoCAD Civil 3D :: Creating A Rail Sub Assembly In Sub Assembly Composer 2013
Jul 11, 2013I thought I created a rail sub assembly.
So I created the rail sub assembly everything looks great in sub assembly composer.
Start a new dwg data reference in the rail alignment, Note the rail alignment type is set to rail.
Create an assembly and under the Construction tab for the assembly the Assembly Type is set to Railway. Attach my custom sub assembly to this assembly.
Created a corridor and I get this error: Something wrong with current subassembly: Operation is not valid due to the current state of the object.
So I delete my sub assembly attach the Civil 3D Rail Single sub assembly. Re run corridor and everything works fine.
So I promote the alignment change type to centerline. Delete the Rail Single sub assembly put my rail sub assembly back. Rerun the corridor and everything works.
So then I undo everything up to the point of promoting the alignment.
Opened the base file changed the alignment type to centerline.
When I tried to synchronize the references I ended up a broken reference with the following error. Invalid reference. Synchronization failed
Not good we already have plan sheets cut.
where in sub assembly composer were do I define the sub assembly to be for Rail?
AutoCAD Civil 3D :: Sub Assembly Composer Editing
Jul 13, 2011A way to edit the stock Sub Assemblies provided by Autodesk?? I noticed they are compiled into a dll, therefore there is not a way to open them as a pkt that I am aware of. My intention is not to get rid of what Autodesk has provided but to add on to them.
Many times I have been asked "This sub assembly is great but can it do this?" of course it is the one thing that particular sub assembly can't do. For instance, the Varying Width sub assembly can't extend the top layer while having the sub base layers go in a negative direction.
AutoCAD Civil 3D :: Sub Assembly Composer Expressions?
Jul 8, 2011Good site that would show how to write VB expressions for the Sub Assembly Composer?
View 5 Replies View RelatedAutoCAD Civil 3D :: Custom Sub-assembly Codes
Jul 21, 2013custom sub-assembly codes,I have gone through the list of codes that is given in the code list.
1. How do I add new code, should I just add with the new index at the end
2. What all things I need to update so correct feature line is picked, etc
3. Any c# example of building a sub-assembly using .net.
AutoCAD Civil 3D :: Subassembly Composer - Lane Assembly Targeting
Nov 19, 2013I create Curb Return Fillet assembly with shoulder in SAC , but now i have problem with targeting , when i giving two targets it takes only first target and ignores second, could you check attached assembly and drawing ?
View 4 Replies View RelatedAutoCAD Civil 3D :: Sub Assembly Composer Change Sign Of Slope
Jan 7, 2013I have an Input parameter called "Construction Slope" of type "Slope" that I would always like to be negative. As i did not find the possibility to restrict end user to inputing only negative value I tried to change the sign of the slope to negative if it is positive by using an "IF" expression (when used as a "Geometry Property" for a new link):
IF(ConstructionSlope<=0,ConstructionSlope,(-1)*ConstructionSlope)
However this expression produces an error: "Compiler error(s) encountered processing expression <...> Cannot infer a common type because more than one type is possible". If i remove multiplication by -1 then the error is gone (and the whole expression becomes meaningless as well of course). See even attached image.
AutoCAD Civil 3D :: Assembly Point Codes Not Shown In Section Views?
May 10, 2012I have a problem with point codes in section views in civil3d 2013. They are not showing at all. Drawing was made in civil3d 2012 and all point codes with defined styles were displayed correctly in section views and now they are all gone. Just link codes are shown. Is there something in setup of code styles that has to be changed?
Even if i set up new code and new label style it does not show up in section view after rebuild. Just in assembly.
If i do the same for link label it does show both in assembly and in section views.
AutoCAD Civil 3D :: Proposed Surface Not Linking To Correct Codes Of Assembly In Corridor
Nov 20, 2013When I paste the proposed surface with the corriodor surface and I check the profile the proposed surface ties to the bottom of the kerb ignoring the footpath.Also in the same drawing file I can't seem to export it to ACAD.
View 1 Replies View RelatedAutoCAD Inventor :: Rotate Assembly Drawing Using Vba Codes?
Jan 10, 2012how to rotate an assembly drawing using vba codes?
View 4 Replies View RelatedAutoCAD Civil 3D :: Basic Assembly Is Not Drawn Correctly In Section View
Oct 16, 2012“Basic assembly” is not drawn correctly in the section view,In the screenshot below, the “Basic assembly” is not drawn correctly in relation to the existing ground.What might be the reason that it is not closed with the existing ground?
View 5 Replies View RelatedAutoCAD Civil 3D :: Created Corridors - Assembly Keeps Showing Up In View Sections
Jun 14, 2012I have created several different corridors (with different assemblies in them), but when I to to view sections the same assembly keeps showing up. How do the sections get updated with the new assemblies?
View 4 Replies View RelatedAutoCAD Civil 3D :: Where Is The Subassembly Composer
Aug 15, 2013I know this sounds like a really stupid question. Where is the subassembly composer? We have Civil3D 2013, and my understanding was that the subassembly composer was supposed to automatically install in 2013 as opposed to previous years when you had to download it from the Subscription Center.
C3D 2013
64-bit
AutoCAD Civil 3D :: Subassembly Composer Superelevation
Jul 23, 2013How to use the superelevation. I read that I have to enter this command:
if((Side=Left)AND(SE.HasLeftLO), SE.LeftLO,
if((Side=Right)AND(SE.HasRightLO), SE.RightLO,
CType(slope,Double)))
but I don't know where, and I just want to create a simple assembly with a slope and delta X and having a lane outside superelevation for the both side.
AutoCAD Civil 3D :: Tunnel In Subassembly Composer
Jul 13, 2012I am creating an subassembly for Tunnel in the subassembly composer.I am wondering how can i draw an ellipse with the minor and major radius data.I tried it with curve geometry but it doesn't seem to be accurate.best way to draw an ellipse with the major and minor axis parameter?
View 7 Replies View RelatedAutoCAD Civil 3D :: Autodesk Subassembly Composer
Dec 6, 2011I have a basic wall sub assembly that I created in SAC.Its looks fine in the SAC but when I import it into Civils it does not work...I have changed the extension from pkt to zip so that I can post it on here
View 5 Replies View RelatedAutoCAD Civil 3D :: Subassembly Composer Superelevation
Feb 13, 2013I am working with SAC , and cant understand how that superelevation works, how to make my models work in CIvil 3d in superelevations... how to build it properly in SAC. I would rly love to get .pkt file with working model as example , or at least get some usefull tip.
View 9 Replies View RelatedAutoCAD Civil 3D :: Can't Edit Contents In Style Composer
May 22, 2012Every time I try to edit the Contents of a label on the Layout Tab of the Style Composer I get the errors below. I've tried a restart, a reboot, a repair and a reinstall with no change. This happens even in a new blank drawing.Each of these messages appears and has to be closed about 5 times.
View 6 Replies View RelatedAutoCAD Civil 3D :: Export Subassemblies Into Subassembly Composer?
Mar 11, 2013I understand the procedure for IMPORTING a pkt file from SAC into C3D. But is there a way to go the other direction?I want to use certain SAs that come with OOB C3D -- but I want to customize them.
Of course I can recreate them -- but I'd rather not start from scratch (ESPECIALLY where it comes to the codes).
AutoCAD Civil 3D :: Subassembly Composer Target Surface
Oct 29, 2013I can import my SA fine, but the problem is that the top of it needs to be cut off 1 m above the existing ground (which is already a surface in civil 3d). How do I setup the target surface so that when I import the SA into my drawing, I can link it to that surface and have it cut off 1 m above the surface?
View 5 Replies View RelatedAutoCAD Civil 3D :: Subassembly Cannot Be Imported From Composer Properly
Aug 11, 2013Not sure since when, the previous imported subassembly porperties cannot be modified in civil 3d and importing a new subassembly from the composer is also having issue, cannot see imported shape, just a red circle.
Someone said because of the SP2 installation. I have to go back to SP1 for now.
AutoCAD Civil 3D :: Subassembly Composer Versus Section 3D
Mar 1, 2012what is the main advantages and disadvantages of these two programs.
Because i actually want to focus of someone of these two programs
AutoCAD Civil 3D :: Subassembly Composer Windows Won't Scroll?
Dec 27, 2012Where Subassembly Composer windows won't scroll? I can scroll with the wheel, but the scrollbars don't work.
If I start a new project, they work for a while, but once I have worked for several minutes, they become disabled again.
I did an uninstall and re-install but I get the same results.
Autodesk Authorized Value-Added Reseller
AutoCAD Civil 3D :: Subassembly Composer Expression For Interchange Offsets
Mar 27, 2013I need to make interchange shoulder widening for my sub assembly.
there is picture where I have the shoulder which I want to add target offset in corridor to make offset of the edge of shoulder. but I don't know how to write expression that when top link will offset slope will move with it and the bottom link will connect in crossing of this two points.
AutoCAD Civil 3D :: Subassembly Composer - Link Slope To Elevation
Oct 8, 2012Its a embankment crest (dam wall) and then sloping down at an angle to a target elevation. I want it to shoot through my topo / surface and then apply a boundary later.
It looks fine in Composer but doesn't show up in C3D - only straight line. Would like the same outcome as the Generic Link Code - LinkSlopetoElevation.
AutoCAD Civil 3D :: Subassembly Composer - Update Existing Custom SAs
Nov 27, 2012What's the easiest way to update an existing custom SA once it's in the drawing.
For example i have some coding that I'd like to change and this particular SA is in use 10 times in my file in different ways. I used the Subassembly Composer to create the original custom SA.
It's not as easy as saving the file over top of the existing .pkt file, if it was I wouldn't be here. It seems to be behaving like a block would. I need to redefine the Subassembly in order for it to update in the drawing. How is best to do this and is there any tricks to the process. When do i need to open and close Civil in order to apply the new changes.
Do I need to update the SA in my tool palette as well?
AutoCAD Civil 3D :: Layout And Roadway Mode In Subassembly Composer
May 28, 2013I use SAC 2014 to create a subassembly such as following but when design, the next Subassembly doesn’t attach with point P4, while the terms verify as designed is TRUE.
I checked and found that the Layout mode is different with- the Roadway mode.
AutoCAD Civil 3D :: How To Connect Two Points Via Surface / Subassembly Composer
Apr 22, 2013I'm trying to create flexible model of a penstock with different ground surface elevation scenario.
In case if both top points of trench below or above EG, there will be cut/fill case to EG.
how to connect P1'/P2' and AX1/AX2 via EG? Basic link wouldn't work because it will be just a straight line.
AutoCAD Civil 3D :: Subassembly Composer - Varying Depths And Shapes
Oct 15, 2012I have a case with the Subassembly Composer where I have 3 varying depths. InsideLane, OutsideLane, and Shoulder. My Base shape below these 3 shapes will not setup properly. I understand why, it's because the varying depths will create a potential step up or down situation depending on the depth of the top 3 shapes. This prevents the definition of the Base Shape.
For the sake of quantities I'd like to create a Base Shape. I could create Base1 Base2 Base3 (one below Inside Lane, Outside Lane, and Shoulder). I would prefer not to for clarity purposes.
How could one approach this? I'm thinking that I need some conditional components to clean this up. I'm not a pro writing expressions. I basically need to define the links that define the varying depths between the top 3 depths. I need to create another point and link if the depths vary, and that link needs to be included within the shape definition for Base.
AutoCAD Civil 3D :: Subassembly Composer - Set Default Width When Using Targets
Oct 4, 2012I can make a small subassembly that can vary it's deltaX and deltaY based on a 3d polyline (or alignment / profile) in the drawing. However the subassembly does not get put in with default perameters outside of the areas where the targets exist.
I have been trying to come up with a decision tree to tell the subasembly to use default values where there are no targets to use, but I have not been able to find the correct syntax that works for those true/false decisions. My VB language knowledge is clearly lacking.....
Looking for small .pkt file to show how it is done?