AutoCAD Civil 3D :: Subassembly Composer Superelevation

Jul 23, 2013

How to use the superelevation. I read that I have to enter this command:

if((Side=Left)AND(SE.HasLeftLO), SE.LeftLO,
if((Side=Right)AND(SE.HasRightLO), SE.RightLO,

but I don't know where, and I just want to create a simple assembly with a slope and delta X and having a lane outside superelevation for the both side.

View 2 Replies


AutoCAD Civil 3D :: Subassembly Composer Superelevation

Feb 13, 2013

I am working with SAC , and cant understand how that superelevation works, how to make my models work in CIvil 3d in superelevations... how to build it properly in SAC.  I would rly love to get .pkt file with working model as example  , or at least get some usefull tip.

View 9 Replies View Related

AutoCAD Civil 3D :: Where Is The Subassembly Composer

Aug 15, 2013

I know this sounds like a really stupid question.  Where is the subassembly composer?  We have Civil3D 2013, and my understanding was that the subassembly composer was supposed to automatically install in 2013 as opposed to previous years when you had to download it from the Subscription Center.

C3D 2013

View 4 Replies View Related

AutoCAD Civil 3D :: Tunnel In Subassembly Composer

Jul 13, 2012

I am creating an subassembly for Tunnel in the subassembly composer.I am wondering how can i draw an ellipse with the minor and major radius data.I tried it with curve geometry but it doesn't seem to be way to draw an ellipse with the major and minor axis parameter?

View 7 Replies View Related

AutoCAD Civil 3D :: Autodesk Subassembly Composer

Dec 6, 2011

I have a basic wall sub assembly that I created in SAC.Its looks fine in the SAC but when I import it into Civils it does not work...I have changed the extension from pkt to zip so that I can post it on here

View 5 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Point Codes And How They Are Used

Nov 5, 2012

I need to make them my best friend because the Subassembly Composer is basically useless unless you use the proper point coding for your SAs. This I know... I've attached an image from the Autodesk file that shows multiple point codes per link and point for the DaylightStandard Civil 3D Stock SA.

Which point codes must I use in my subassemblies to ensure I can create corridor surfaces properly down the road? For example the DaylightStandard SA shows...

P3 shows: Ditch_Out, Hinge, Hinge_Cut
P3 also shows: Daylight, Daylight_Fill 
P4 = Dayltight, Daylight_Cut

If I'm building something similar in the Subassembly Composer what the heck do I focus in on for my point code. I will have issues with my Corridor surfaces down the road if I don't do this properly up front. I've seen examples where the Input / Output Parameters you define a string for the coding, is this to apply multiple codes to a point or a link?

View 1 Replies View Related

AutoCAD Civil 3D :: Export Subassemblies Into Subassembly Composer?

Mar 11, 2013

I understand the procedure for IMPORTING a pkt file from SAC into C3D.  But is there a way to go the other direction?I want to use certain SAs that come with OOB C3D -- but I want to customize them.

Of course I can recreate them -- but I'd rather not start from scratch (ESPECIALLY where it comes to the codes).

View 3 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer Target Surface

Oct 29, 2013

I can import my SA fine, but the problem is that the top of it needs to be cut off 1 m above the existing ground (which is already a surface in civil 3d). How do I setup the target surface so that when I import the SA into my drawing, I can link it to that surface and have it cut off 1 m above the surface?

View 5 Replies View Related

AutoCAD Civil 3D :: Subassembly Cannot Be Imported From Composer Properly

Aug 11, 2013

Not sure since when, the previous imported subassembly porperties cannot be modified in civil 3d and importing a new subassembly from the composer is also having issue, cannot see imported shape, just a red circle.

Someone said because of the SP2 installation. I have to go back to SP1 for now. 

View 2 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer Versus Section 3D

Mar 1, 2012

what is the main advantages and disadvantages of these two programs.

Because i actually want to focus of someone of these two programs 

View 5 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer Windows Won't Scroll?

Dec 27, 2012

Where Subassembly Composer windows won't scroll? I can scroll with the wheel, but the scrollbars don't work.

If I start a new project, they work for a while, but once I have worked for several minutes, they become disabled again.

I did an uninstall and re-install but I get the same results.

Autodesk Authorized Value-Added Reseller

View 2 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer Expression For Interchange Offsets

Mar 27, 2013

I need to make interchange shoulder widening for my sub assembly.

there is picture where I have the shoulder which I want to add target offset in corridor to make offset of the edge of shoulder. but I don't know how to write expression that when top link will offset slope will move with it and the bottom link will connect in crossing of this two points.

View 4 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Lane Assembly Targeting

Nov 19, 2013

I create Curb Return Fillet assembly with shoulder in SAC , but now i have problem with targeting , when i giving two targets it takes only first target and ignores second,   could you check attached assembly and drawing ?

View 4 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Link Slope To Elevation

Oct 8, 2012

Its a embankment crest (dam wall) and then sloping down at an angle to a target elevation. I want it to shoot through my topo / surface and then apply a boundary later.

It looks fine in Composer but doesn't show up in C3D - only straight line. Would like the same outcome as the Generic Link Code - LinkSlopetoElevation.

View 4 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Update Existing Custom SAs

Nov 27, 2012

What's the easiest way to update an existing custom SA once it's in the drawing.

For example i have some coding that I'd like to change and this particular SA is in use 10 times in my file in different ways. I used the Subassembly Composer to create the original custom SA.

It's not as easy as saving the file over top of the existing .pkt file, if it was I wouldn't be here. It seems to be behaving like a block would. I need to redefine the Subassembly in order for it to update in the drawing. How is best to do this and is there any tricks to the process. When do i need to open and close Civil in order to apply the new changes.

Do I need to update the SA in my tool palette as well? 

View 1 Replies View Related

AutoCAD Civil 3D :: Layout And Roadway Mode In Subassembly Composer

May 28, 2013

I use SAC 2014 to create a subassembly such as following but when design, the next Subassembly doesn’t attach with point P4, while the terms verify as designed is TRUE.

I checked and found that the Layout mode  is different with-  the Roadway mode.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Connect Two Points Via Surface / Subassembly Composer

Apr 22, 2013

I'm trying to create flexible model of a penstock with different ground surface elevation scenario.

In case if both top points of trench below or above EG, there will be cut/fill case to EG.

how to connect P1'/P2' and AX1/AX2 via EG? Basic link wouldn't work because it will be just a straight line.

View 5 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Varying Depths And Shapes

Oct 15, 2012

I have a case with the Subassembly Composer where I have 3 varying depths. InsideLane, OutsideLane, and Shoulder. My Base shape below these 3 shapes will not setup properly. I understand why, it's because the varying depths will create a potential step up or down situation depending on the depth of the top 3 shapes. This prevents the definition of the Base Shape. 

For the sake of quantities I'd like to create a Base Shape. I could create Base1 Base2 Base3 (one below Inside Lane, Outside Lane, and Shoulder). I would prefer not to for clarity purposes. 

How could one approach this? I'm thinking that I need some conditional components to clean this up. I'm not a pro writing expressions. I basically need to define the links that define the varying depths between the top 3 depths. I need to create another point and link if the depths vary, and that link needs to be included within the shape definition for Base.

View 1 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Set Default Width When Using Targets

Oct 4, 2012

I can make a small subassembly that can vary it's deltaX and deltaY based on a 3d polyline (or alignment / profile) in  the drawing. However the subassembly does not get put in with default perameters outside of the areas where the targets exist.

I have been trying to come up with a decision tree to tell the subasembly to use default values where there are no targets to use, but I have not been able to find the correct syntax that works for those true/false decisions. My VB language knowledge is clearly lacking..... 

Looking for small .pkt file to show how it is done?

View 3 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Ditch Depth In Fill Condition

Feb 2, 2013

I am trying to create a custom subassembly using SAC 2012 that will place a 1' deep ditch at the bottom of the slope in a fill condition.  The trouble I am having is how to hold a consant 1' depth on the backslope and vary the foreslope since the daylight offset and elevation is variable depending on the slope of the existing ground.  I need the attachment point to be the edge of the shoulder so it seems like a loop that varies the foreslope length would be required but loops are not allowed.  I will also have the option to target a profile but I also need the ability to hold a constant ditch depth.

How to model this condition.

View 9 Replies View Related

AutoCAD Civil 3D :: Change Sequence Of Input / Out Parameters In Subassembly Composer?

Mar 13, 2012

When I created my subassembly with subassembly composer, it's difficult to change the sequency of the input/output parameters. Do we have an easy way to do that, Like moving?

View 4 Replies View Related

AutoCAD Civil 3D :: Conditional Point / Link Code In Subassembly Composer

Jan 10, 2013

it is possible to define point/link codes using some conditional expressions. When I try to write in an expression under "Link Codes" I get an error. Is there a way to create conditional codes without the use of "decisions"?

View 1 Replies View Related

AutoCAD Civil 3D :: Autodesk Subassembly Composer 2013 - Lane Outside Condition?

Jan 31, 2013

Does the 2013 subassembly composer include a way to include a condition based on LANE-OUTSIDE-SLOPE?

The figure below indicates the type of condition I would like to include (red arrows).

View 5 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Variable Ditch Bottom With Slope And Delta Y

Oct 22, 2012

I'm trying to build the ditch portion of my Subassembly backwards from an offset target "DitchOffset". The elevation of this point should be derived from a point that is using Slope and Delta Y from point "P12" (see attached). Must be at least 1m from the bottom of SubBase with a 5:1 slope. 

The Ditch Bottom will be variable width. I'd like to be able to select my offset alignment for my ditch bottom. Have a link from this point extend at a slope to the Target Surface to complete the foreslope.

I can't quite picture how to complete the links from the DitchOffset point. This may be complicated but the diagram identify what I'm trying to do.

View 6 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer 2013 - Change Order Of Input / Output Parameter

Sep 24, 2013

Is there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?

I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.

View 3 Replies View Related

AutoCAD Civil 3D :: Shoulder Subassembly That Varies Slope In Relation To Lane Superelevation Slope

Jan 22, 2013

i need a shoulder subassembly that varies slope in relation to the lane superelevation slope. i know that i can get a subassembly for the shoulder that will follow the alignment superelevation xml data but in my case i can't use it because we are just adding a shoulder to an existing road. we're not changing the superelevation of the existing road, just milling and overlaying and widening. right now i've created a profile of the outside edge of the shoulder that gives me the correct shoulder slope but whenever i change my centerline profile i have to redo the shoulder profiles which is a real time suck.

View 9 Replies View Related

AutoCAD Civil 3D :: Import Subassembly API For Custom Subassembly - Error?

Nov 12, 2013

When I use ImportSubassembly API to import my subassembly created by Autodesk Subassembly Composer  into my civil project, it reports error-"eFilerError".

the code like this:

atcFile = @"D:9f92eaa4ef514ac982518852e1169932.atc";
itemId = "ab660722-c69d-4ade-b373-0e9f99c94e55";
SubassemblyCollection subassemblyCollection = cDoc.SubassemblyCollection;
ObjectId subassemblyId = subassemblyCollection.ImportSubassembly("TestSubassembly", atcFile, itemId, this.doc.Editor.GetPoint("Select import subAssembly location").Value);

However, it is OK if to import subassembly provided by Cilvil 3D.

View 9 Replies View Related

AutoCAD Civil 3D :: SuperElevation Not Responding?

Apr 13, 2012

I have a problem with my superelevation. everything is calculated accordingly but when i build my surface from corridor after i have calculated superelevation it does not show the results. Even my cross sections view still show a normal assembly cross section. It happaned on both C3d2011 and ad C3d3013. 

View 9 Replies View Related

AutoCAD Civil 3D :: Superelevation Information From Alignment

Oct 20, 2011

Is there a way to retrieve superelevation values from Alignment properties to show on, for example curve tables?.  I would like to display the super information along with curve geometry information.

View 1 Replies View Related

AutoCAD Civil 3D :: Corridor Surfaces And Superelevation

Feb 26, 2013

I have an alignement to which I have applied superelevation.

The superevation has been applied and the alignment has been annotation and it shows the change from camber to superelevation on  the curves.

However when I create a surface of my corridor it does not show the superelevation, the surface is showing a cambered alignment throughout.

I have created a new alignment, a new corridor and surface and still the same.

View 3 Replies View Related

AutoCAD Civil 3D :: Superelevation Curve Name API 2014

Sep 16, 2013

This is my aplicattion in Civil 3D 2014. URL....It´s a tool palette that checks the design criteria (for alignments,superelevations and profiles) according to Spanish rules.My program changes the name of each superelevation curve,for example:

---> With superelevation tool own of Civil 3D (Cuve.1,Curve.2,Curve.3)

---> With my program: (VisorNET Curva.1,VisorNET Cuva.2,.....)

 If I calcule again Superelevations using Superelevation button (Calculate/Edit superelevation)of Civil 3D, Civil 3D doesn´t change the Superelevation Curve Names and appears again (VisorNET Curva.1,VisorNET Curva.2,...).Superelevation CurveName property doesn´t exist in settings:

URL....and there isn't a name template. I would like to have this property (read and write----get and set) of settings.Then, I could re-write  the default Superelevation CurveName format. (name template)

View 4 Replies View Related

Copyrights 2005-15, All rights reserved