I am new to VB.net and I just wondering if it is possible to use some codes that we use in VBA into VB.net , things like this .
Public Sub AddTheCircle() Dim p(0 To 2) As Double, r As Double p(0) = 10: p(1) = 50: p(2) = 0 r = 150 ThisDrawing.ModelSpace.AddCircle p, rEnd Sub
If not , so how to start with VB.net parallel to Autocad ?
I was wondering how to develop a Selection Set Filter that will select only Cogo Points? I know I need to use Dxf.Start as the code, but then what's the string associated with Cogo Points? Can't find any documentation on this or any Civil 3D-unique entities...I know Line is just "Line" and "Arc" is just arc...but Polyline is the unintuitive "LWPolyline" and "Cogo Point" isn't working.
View 5 Replies View RelatedI am seeking to simplify some of our drawings and want to make some forms or tables that has a click check or radio button. Is this possible in any way using Autocad and/or using the Visual Basic and Visual LISP add ons?
If it is possible what I seek is something similar to what is shown in the attached picture. Ideally I would be able to group the boxes together and set up something so it will only allow one of them to be checked, same thing for Mixed Occupancy, Construction Types, etc. If that is not possible via any means at a minimum I would like to be able to just click on the box to check or uncheck it.
If there is some way to make it as a block with attributes I can handle that as well.
How should I make a form which contains some shapes to be added to my drawing? by user pointing of course.
View 6 Replies View RelatedI'm trying to make a template for a six-faceted vase form. Basically one side of a sweeped hexagon along a curved path which I would like to Flatten in Sheet Metal.
First, I have a profile:
Then, I add a hexagonal base sketch:
Next I do a sweep using the profile as a guide rail and the y-axis as the axis:
So far so good. Finally, I select one of the facets and Thicken to 1mm:
After converting to Sheet Metal and setting the Sheet Metal default to 1mm, Sheet Metal will not perform a Flatten because it cannot find any bends.
Is there any way to go about this in Inventor? Perhaps using some other method than a Sweep? Any method that produces a flat pattern
I just started with Autocad and I got a problem with creating a solid. The file is attached and as you can see I managed to make the form as a Mesh but from that point I can't convert it to a solid.
View 9 Replies View Related[URL].........
That link is multiple images i have taken i want the ink to form the title of a book cover. By using the ink thats in the image not to put a already existing font over the top. How do i do this im not new to Photoshop but also not great. I have Photoshop CS6 and am on a Mac.
how do I make Font Lettering form in a circle?
View 5 Replies View RelatedI am trying to make a logo form Facebook page. The purpose of the page is to cover beauty pageants from around the globe, now I am confused how should the logo be like should I have a tiara or a image of a beauty queen or a plain simple logo.
View 1 Replies View RelatedI'm doing a full single page website in Edge, and don't know how to build a contact form with name, email and message with a send button and erace button, just like this.
View 3 Replies View RelatedI want to make a collage page but in landscape form.
Example 9 x 11 so that I can use it to be printed by Costco or someone else
One of the features I was really looking forward to in CS6 was creating fillable forms with ONE application. I created a form following the step by step instructions in classroom in a book for CS6. When I opened the exported form in Reader X, I get a "This operation is not permitted" error. I opened the completed "end" document in the lesson to make sure I didn't commit an error, and I got the same message when exporting. I have looked for places in menus to modify security restrictions and I can't find any. I installed the updates and that didn't solve the issue.
I saw one solution posted which is to open the document in Acrobat, then do a "save as" option. Is there anything we can do that doesn't involve buying additional software? If this is not the case, then Adobe seriously needs to change its training and advertising about this functionality.
I am working on a form (global) and have added a picture with a parameter and a picture folder underneath. So that the picture displayed on my form will change depending on the parameter value.Here comes the trick. Only text parameters can be used!On the form editor only 'Text parameter' can be selected to drive the picture selection. I actually need an integer, so that i can use my User/Excel parameters from Inventor.
I can work this around with an iLogic rule to equal the value of my string Picture Parameter with the relevant integer Inventor parameter, but the rules need to be run before the pic and the form updates (by pressing the 'Apply' button at the bottom of the form and then the assy updates too. So this takes a couple of minutes)... whereas if it was an option on the form editor then the update would be instant without waiting for everything to update...
Is there a particular reason why the Picture Parameter only can be a text parameter?
In this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
I am lifting mtext from a drawing and then working with the result. For some reason the "\pxi-" at the beginning of the string I am lifting is converting to " pxi-" when worked with as a string in vb.net. The result is this, when I apply the string back to mtext I get a bunch of messed up formatting codes at the beginning rather than a formatted piece of text.
This seems to be related to the "\" Is this automatically getting modified by vb or autocad when I pull the source text?
custom sub-assembly codes,I have gone through the list of codes that is given in the code list.
1. How do I add new code, should I just add with the new index at the end
2. What all things I need to update so correct feature line is picked, etc
3. Any c# example of building a sub-assembly using .net.
I'm looking for a way to tag entities (for example arc) in a DXF with an numeric ID of my choosing. I've been trying to understand the DXF reference and find examples of how to do it, but there is not much information available. My interpretation of the standard is that I'm allowed to do this:
0
ARC
8
Layer1
10
-1.734315
20
-1.975000
40
0.300000
50
225.000027
51
270.000065
102
{MYAPPLICATION
2000
13
102
}
Where 2000 is my application defined code and 13 is my numeric ID value. Is this correct use of application defined codes?
I need to make them my best friend because the Subassembly Composer is basically useless unless you use the proper point coding for your SAs. This I know... I've attached an image from the Autodesk file that shows multiple point codes per link and point for the DaylightStandard Civil 3D Stock SA.
Which point codes must I use in my subassemblies to ensure I can create corridor surfaces properly down the road? For example the DaylightStandard SA shows...
P3 shows: Ditch_Out, Hinge, Hinge_Cut
P3 also shows: Daylight, Daylight_Fill
P4 = Dayltight, Daylight_Cut
If I'm building something similar in the Subassembly Composer what the heck do I focus in on for my point code. I will have issues with my Corridor surfaces down the road if I don't do this properly up front. I've seen examples where the Input / Output Parameters you define a string for the coding, is this to apply multiple codes to a point or a link?
how to rotate an assembly drawing using vba codes?
View 4 Replies View RelatedIt is my understanding that C3D will only display the first point when there's more than 1 code for a survey point.
My first thought was to copy the line in the PENZD txt file and edit so that there's only 1 code listed. I tried appending the point number with "A" and ".1" without luck I assume I would need to use the next available point number.
An example of my txt file is:
17371,298429.877,568639.651,801.030,LPM SGN This produces only the light pole symbol and not the sign.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
AutoCadLT 13 won't open, internal error codes 2738, won't reinstall or repair or uninstall and it started with the new service pack update.
View 1 Replies View RelatedI'd like to view the point codes (and also the links and shapes) of an assemby I have on my c3d drawing.I dont see nothing to get it ....
Civil 3D (2013)
How I can get the linetype dxf codes of a line that I select. I have tried a few different things and all I can get is the linetype name. I'm trying to write a Lisp program that draws a "template" and sets up the line types and layers etc. But I need to get this info from a current drawing so that I can put it into the program. So far the program works well, but if I take a new drawing and run the program, the line types will need to be set up and the colors on the layers. I don't think I'll have a problem with the colors as they are standard to Autocad, but the linetype used in the current drawing is "homemade".
View 5 Replies View RelatedWe are using Civil 3d 2010.
In a description key code file, I would assume that a description key code of simply * would capture all points, but it seems this code gets ignored. How do we create a key code that captures all points?
For example, if I want to take advantage of the hierarchical processing of DKC files to assign layers, point styles, label styles, etc, I can theoretically create a 'design' DKC file that makes all points, regardless of their desciptions, to be sized relatively, and then move that DKC file to the top of the DKC file list.
I know this can be accomplished through the "_all points" point group, but I want to be able to control point layers as well, and as far as I know, neither point groups, point styles, nor label styles affect the insertion layer of a point, but DKC files do.
I am quite conversant with Unicode keystrokes (Alt+XXXX) for most symbols in fact I have a cheat that aids me in the correct character code.If I don't have the code I just copy it from the character map and paste it into the sentence but it gets a little tiresome after a while searching the character map for symbols.
I have on numerous occasions lately had the need to to insert the 'THEREFORE' symbol (You know the 3 dots in a triangle) into text notes on my drawings.
This symbol only seems to have a code "U+2234"..I have spent a lot of time searching everywhere for a clue as to what this keystroke sequence means.
I have my font style set to "Arial Unicode MS". Looking for the correct keystroke sequence for "U+XXXX"?
Simple LISP routine to enable the background mask of a single mtext object using dxf codes?
View 4 Replies View RelatedCan I use the description key set to not show point parameters with particular characters?I use the Linework Code Set codes to control survey figures and so the linework codes show up in the Raw descriptions. That's great for editing survey data.
But when the survey is passed on to the designers I want to show a full description that does not show the linework codes.For example when surveying a road culvert I will code the first point,
"CULV B 32 600" - (CULV is the code for culvert, B is to begin the figure, 32 is the culvert number and 600 is the diameter)
The second point is coded, "CULV 32 600"I want to show full descriptions of "CULV 32 600" for both points, ie I don't want a parameter that is a "B" to show up.Can I use the description key set to not show point parameters with particular characters?
We have been using Stringer Connect to convert our SDR files to RW5 then FBK, but have recently tried the Survey Link for Civil3D2008.
We use a field code "EC" for edge of concrete. Stringer handles this just fine, but whenever Survey Link sees EC it removes the code from the RW5 file, so we end up with points with no codes and no strings joining them.
How can you "hard code" a link code or point code into a subassembly? I can use Input parameters to create the code, but then the user has the ability to change the code once in C3D?
how can you lock the name of a point or link code?
I would like to have my corridor section points report to have different labels for the points like Edge of Shoulder or EOP instead of labels like P2 and Hinge. Is the only way to do this to somehow change the codes in the stock subassemblies?
Civil 3D 2014
I have a problem with point codes in section views in civil3d 2013. They are not showing at all. Drawing was made in civil3d 2012 and all point codes with defined styles were displayed correctly in section views and now they are all gone. Just link codes are shown. Is there something in setup of code styles that has to be changed?
Even if i set up new code and new label style it does not show up in section view after rebuild. Just in assembly.
If i do the same for link label it does show both in assembly and in section views.