Whenever I hover over my guardrail Subassembly I created with SAC I get this error. It's tied to the Tooltip info because it only happens when they are turned on. I have written a lot of subassemblies with SAC and this is the first one with this issue. See video: [URL] .......
I saw other posts about similar errors recommending a repair, which I did try, to no avail.
AutoCAD Expert Elite
AutoCAD Civil 3D 2014 Certified Professional
C3D 2014 (SP1)
Win 7 Pro, 64-bit
When I use ImportSubassembly API to import my subassembly created by Autodesk Subassembly Composer into my civil project, it reports error-"eFilerError".
I'm getting lots of error messages when I bring up drawings in my 2009LT. Resource Manager Error. Cannot load resource only DLL. File not found, then many similar messages with AecResMgrenu.dLL.
Over and over, keep hitting OK till drawing loads. Not one specific file either.
Also: Unable to locate resource string. Resource Manager is not correctly installed.
Is there a way to fix without reloading 2009LT and having to reset all settings. Can that file AecResMgrenu be replaced. I have backup Program Files on CD.
I created a new version of DaylightBench subassembly with a different class library application on .net for c3d 2009.
I added the tool data to C3D Metric Transportation Subassembly Catalog.atc. Tool is listed on Subassembly catalog and i can copy-paste the tool to Tool palette.
But on tool palette when i try to drag it to drawing it gives the error "tool is not registered". error msg is attached.
can it be about the resource fileds on ATC file eg: resource="1302" or the new GUID values?
I get a multiple error message dialogue "Cannot find resource string number XXXX in AeccPublishSVC 100 when exporting a DWFX file of drainage in Civil3d R2014 (I have R2013 open as well).
I created a custom assembly that has an offset target. Is it possible to program my subassembly to target only on the side of my subassembly (and not criss-cross onto itself it the target is on the other side)?
What's the easiest way to update an existing custom SA once it's in the drawing.
For example i have some coding that I'd like to change and this particular SA is in use 10 times in my file in different ways. I used the Subassembly Composer to create the original custom SA.
It's not as easy as saving the file over top of the existing .pkt file, if it was I wouldn't be here. It seems to be behaving like a block would. I need to redefine the Subassembly in order for it to update in the drawing. How is best to do this and is there any tricks to the process. When do i need to open and close Civil in order to apply the new changes.
Do I need to update the SA in my tool palette as well?
So simple little retaining wall subassembly created in the SAC. When i extract multiple feature lines from a corridor using this subassembly, all the feature lines assume the elevation of the first link i selected. So if i first click on 'RW_Hinge" all successive feature lines will show up with the same elevations as "RW_Hinge". if i erase all the feature lines the select a different link say "RW_Top" then they all go to "RW_Top".
I'm not having any luck on my own. Can I use subassemblies that I create in subassembly composer to make an intersection using the "CreateIntersection" command?
I've been running ADT 2005 successfully on windows XP Pro for a year, but suddenly after running the backup program in windows XP, I effectively cannot startup and run AutoCAD for all the "Resource Manager Errors".
Checking the Autodesk knowledge base, the problem is recognized, but the solution does not appear to be available to me. Here is what Autodesk has to say:
Startup error: Cannot load resource only dll Published date: 2004-10-21 ID: TS100289 Applies to: Autodesk Architectural Desktop 2005 Issue
When you attempt to launch a session of Autodesk Architectural Desktop 2005, the following error message is displayed:
Cannot load resource only dll
Solution: This error message typically occurs on systems running a backup software, such as Backup Software Verita 9.1. This software runs a remote agent that causes a conflict with the loading of ARX and DLL files associated with Autodesk Architectural Desktop 2005. In these instances, disabling the remote agent will restore the ability to launch and utilize Autodesk Architectural Desktop 2005.
*[back to me] - I've searched for the aformentioned "remote agent" on my system, but to no avail. Meanwhile, I cannot run ADT as it asks for missing files at startup and at every command.
I have made all my sheets through the Plan Production wizards. When I go to sheet set manager, and select publish to pdf, i get an error saying the following:
ERROR: Layout not found..By using one tab per drawing, seems to publish ok. But we want multiple tabs per drawing, so not really any use to us.
I'm running After Effects CS6 11.0 on MAC OSX and everytime I attempt to apply text, either by creating a new text layer from the drop down menu or dragging open a text box I get "Unable to Access Resource P_TextSmallCaps_Sm_N_D (type png)"
Is this a png file missing from the program, a fixable bug or what?
When working in the "Layout" when I want to work with the "viewport" always a window "Resource Manager Error" that says "Unable to find a row with the number 25900 in the resource AecXDisplayPropsData60" and one key "OK" Click the window again propodaet but when I try to work with the viewport poevlyaetsya again.
I have created a custom Assembly using Assembly Composer for C3D 2012 and imported it to C3D. Problem is when I try to place the assembly in a drawing.
I get the error message "Unable to execute the tool. Not enough storage is available to complete this operation."
I am trying to create an assembly that will calculate a built volume based on constructed height of the structure.
I have a SSM set up with both Sheet Custom Properties and Sheet Set Custom Properties.
When I start a new project, i can populate both areas of the main SSM. I'll create my sheets and have them self populated by the "root" SSM settings (if you will)well now, lets say i need to change the date of the sheets from the past.. to the future submittal date. I set it in the "Sheet Custom Properties" in the "root" SSM and then I have to go to each sheet; right click --> Properties each sheet and change the custom properties.
Basically, is there a way to have the sheets (after created) to automatically update to the new date?
I currently use code similar to Lee Ambrosius's 2009 AU handout that shows how to set/create custom properties. URL.... search for the header 'Adding Sheet Set and Sheet Properties'.
I have now accumulated numerous unused custom properties in my sheet set. I haven't been able to find a way to delete these additional custom properties.
Because I use multiple subsets with multiple sheets for printing, I would rather not have to go through all the sheets, store all the custom properties I need, destroy all the existing custom properties, and then re-create just the ones I need. how to delete individual custom properties.
It been a while since I did this and I getting something wrong. I want to add custom SS field to my TB which I have created in SSM, but when I edit the block to add the custom field to an attribute default the list is empty.
Civil 3D 2012 & 2013 HP Z210 Workstation Intel Xeon CPU E31240 @ 3.30 Hz 12 GB Ram
I've made an stairs assembly that contains adaptive parts that are all controlled by the assembly parameters.
Here is my assembly and the controlling parameters. The stringers on the side are made with the frame generator and use the "extend" feature to get the appropriate length, as driven by the parameters. The reason I used frame generator is so that I can easily change sizes of the stringers down the road, if needed. I chose to make the parts associative so I could control all of the parameters from within the assembly instead of opening each part separately.
My goal now is to be able to use this assembly (or something similar) as a template to create new sets of stairs, all to be placed in the same main assembly.
I attempted to duplicate all of the parts (append a "2" at the end of each file name and replace components in the new set of stairs with the 2nd version) but ran into problems with the two stringers. I can't figure out what to do to get the Frame00001 and Skeleton00001 to reassociate to Frame00002 and Skeleton00002. So any time I change my slope, the original stairs will end up trying to copy the new stringers instead of keeping the old ones.
how can I make this assembly reference a new frame, and secondly?
We are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly. The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified. how to add a target for a sub that is added after the corridor was created?
Civil 3D 2012 & 2013 & 2014 Toshiba Qosmio X505-Q890 2 x i7 - Q740 quad core CPU's 8GB of RAM 60GB SSD + 500GB HDD NVidia GeForce GTS 360M - driver 8.17.13.0697 Win 7 Home Premium
I need to transition to one subassebly to another. The first subassembly is at existing ground the other assembly is above ground. See following picture:
I need to transition from station 12+50 to 13+50. See following picture:
Here is a picture of the Corridor Properties:
Do I need to make a different subassembly in between the two stations? Is there a command I am not seeing that does it for me?
I know this sounds like a really stupid question. Where is the subassembly composer? We have Civil3D 2013, and my understanding was that the subassembly composer was supposed to automatically install in 2013 as opposed to previous years when you had to download it from the Subscription Center.
I have a project where I am removing existing asphalt pavement and overlaying new pavement. I am changing the existing profile and cross-slope to tie-in to the existing profile and cross-slope. know of a mill and overlay subassembly that will allow you to tie the edge to a profile or feature line?
Specifically to Subassembly.LinkWidthAndSlope / I only have Top or Datum options for that sub and if I assign either one in the code set it seems to overwrite all the other subassembly materials such as asphalt, curbs etc...with none set my realisic view has a gap between the back of curb and slope to existing.
Civil 3D 2012 SP1 on Win 7 64-bit SP1 Intel i7-2600kcpu @ 3.4ghz 16mb ram ATI FirePro V4800
but I don't know where, and I just want to create a simple assembly with a slope and delta X and having a lane outside superelevation for the both side.
