I'm using autocad architecture 2010. When I click on the tool palettes like the steel command it is tell me. Unable to execute the tool. Unspecified error. How can I get the tool palette to work again?.
View 4 RepliesI am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies View RelatedI have created a custom Assembly using Assembly Composer for C3D 2012 and imported it to C3D. Problem is when I try to place the assembly in a drawing.
I get the error message "Unable to execute the tool. Not enough storage is available to complete this operation."
I am trying to create an assembly that will calculate a built volume based on constructed height of the structure.
I have attached the PKT file.
I have been away from PhotoShop for awhile and have not used CS3 for over a year. When I try to use the clone tool a pop up tells me unable to use tool due to a program error. How can I fix?
View 1 Replies View RelatedI can choose any tool either by menu or by shortcut, but only the hand icon remains visible and active. Reopen Photoshop and rebooting mac doesn't work, only solution I have found is: Repair Disk Permissions.
View 4 Replies View RelatedMy program crashed and upon restarting it some settings have changed. The biggest change is that I am unable to select objects and then execute a command. What the program is doing is when I select the objects I want a particular command executed, it will de-select all of the object and then execute the command. I then will have to reselect my objects. This makes deleting line work a little mor inconvenient. What setting is this and where can I change it back.
View 1 Replies View RelatedI have created a dll that I can run from the command line just fine. However, I have been asked to do the following:
When the user opens a drawing a button will appear. When the user clicks on the button the command contained in the dll will be executed.
I don't know how to do this and haven't been able to find much on this. I am using AutoCAD 2011.
How to execute -Overkill command in autocad using batch process.
View 2 Replies View RelatedHow do I use CUI to assign CTRL+M to execute the '_PAN command ?
View 4 Replies View RelatedI have tried to find information about this, but I am having a hard time. So i need to explain what I am doing.
I would like to be able to use commands stored in the cui menu file, initially this is done using our tablets, but our tablet drivers cannot work with windows 7 and autocad, nor can i get any that do, (i have tried over 20 different drivers).
So, instead of making a lisp function for every macro. I need to be able to use some of them.
Can I execute one of these macros using "MENUCMD" ? , I have all the information i need to do it but cannot figure it out menucmd does not seem to have an option to actually run the macro, and if it does It only seems to be able to do that with popup menus.
Currently i use the ribbon and add them in there, but want to know If i can do so just with lisp. and create my own on-screen tablet menu.
Here is an example of one of the macro's in the cui i need to use.
And here it is in the cui menufile:
UNDER-> <MacroGroup Name="User">
<MenuMacro UID="MMU_WT1[A-5]">
<Macro type="Any">
<Revision MajorVersion="17" MinorVersion="1" UserVersion="1" />
<ModifiedRev MajorVersion="17" MinorVersion="2" UserVersion="1" />
<Name xlate="true" UID="XLS_6804">WT1[A-5]</Name>
<Command>^C^CDTEXT C .125 0 </Command>
</Macro>
So.. that is my question how can i use that command via lisp..
Me and a friend are trying to work on a LISP routine to select objects in a drawing and change their attributes to "ByLayer" and other things. He is a familiar with the AutoCAD commands, I have a general idea of how to use LISP and we're trying to put our heads together to solve some workflow issues at our job.
-aDiagram
(defun c:set23 ()(setq uecho (getvar "cmdecho"))(setvar "cmdecho" 0)(command "setbylayer" "al" "" "n" "y")(command "-layer" "c" "23" "*")(command "-xref" "d" "*")(command "-purge" "al" "" "*" "n")(setvar "cmdecho" uecho)(princ))
Inventor isn't letting me use the revolve tool. I got the work axis and the sketch. I attached my part here and I also attached the file that tells how the revolve should look like .
View 2 Replies View RelatedI want to sweep the "cutting tool" through the helix to create a inner thread of my nut. When i set "Align" to "NO" it refuses to sweep. If i set "Align" to "Yes" it works perfectly but the result is of course totally wrong.
[URL].......
I'm trying to execute a pedit command in a lisp routine, without echoing, with no luck...
cmdecho and nomutt dont resolve my problem...
I would like to execute scalelistedit command with auto added parameters (Reset - Yes - Exit).
My
doc.SendStringToExecute("-scalelistedit R " + "
" + "Y" + "
" + "E", true, false, false);
And doesnt work - I'm getting "Invalid option" and it seems like instead of R, passing is A option (Add).
Just upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
I am running Inventor 2012 sp2.
Even with a simple IPT that only has a handfull of features, at times it takes a long time (3-5 minutes, sometimes longer) for Inventor to execute a undo or redo command.
Undo file size setting in Application options is set at 1MB (which is teh same setting I used in previous versions).
I am trying to run a parcel area report generator, and I get the above error message, along with the path xslParcel_Area.xsl and an advisory to reinstall the program.
I think it is pointing to the full path location of C:ProgramDataAutodeskC3D 2012enuDataReportsxsl.
The file (Parcel_Areas.xsl) exists in this location.
NONE of the parcel reports that I tried to execute work - they all return the same grammtically painful error message.
The measure tool is not giving me the correct measurement. For example, I offset a line 24' and when I go to double check the distance it is off by .03. That is starting on the original line and doing a perpendicular snap to the other line. So I thought, wait a minute that can't be right, so I drew a line between the two lines and did an inquiry and it gave me 24'.
I also did a dimension which also was correct. I also measured a 97' line and it was off by 3 feet. Never had issues with previous versions of Autocad as far as measuring.
I've recently installed auto cad 2007lt on our new computer. I set up numerous tool palettes with blocks that we use often. I was pulling images from the palettes to my drawing with no problem.
Today when I tried inserting an image from the tool palette it is saying that the image can not be found. I've tried under previous drawings and new templates and have been unsuccessful.
OS: Windows 7..I click on the PSCS5 button to start the program. The Photoshop.exe file briefly appears in Task Manager, then disappears. Nothing else happens. No error messages, no warnings, no nothing. I've uninstalled PS and reinstalled it. Trying to get the 12.0.4 patch installed, but since you're supposed to do it from inside the program, I can't run it.I just tried executing with Ctrl+Alt+Shift and it still doesn't want to come out and play.
View 4 Replies View RelatedPhotoshop CS4 keeps shutting down when I try to execute the program. I have uninstall and re-install the program and still it shutdowns. It is running on Windows XP 32bit version. I get the following error message:
AppName: photoshop.exe
AppVer: 11.0.0.0
ModName: photoshop.exe
ModVer: 11.0.0.0
Offset: 000c85f1
I'm currently working on a information page for my school. I spend many many hours creating it.After I saved and closed it today, I started my backup sync software called "Sync n Go" to save the file on my PC as well and not only on my portable flash drive.After I did so I got an idea and decided to open it again but I wasn't able to. Photoshop shows me a error message that says that Photoshop can't execute this psd because a program failure occured. (Image attached but on german)
My question is, if there's any way to restore this file?
Cs4 extended. "bigtiles" plug in not loaded. This is trial version, I haven't bought upgrade yet......but this feature is key for me.
Vista 32 bit, 4gb ram, 32gb available on HD
I keep getting the "can't complete because not enough RAM" message
I tried
a)converting to 8 bit file. working file size is 41mb
b)increasing amount of ram used by PS to 80%
c)removing most other processes from running.
efficiency still show up at 100% during process.
I've seen on this forum a lot people saying that in CS6 you can now call an action from JavaScript. However, I haven't been able to find what the syntax is to do that in the reference or the guide. Can you actually do this now with Javascript?
View 2 Replies View RelatedI have been trying to get Lightroom to execute a PS droplet after exporting a set of images. The droplet runs a set of actions which performs certain sharpening and NR steps. What I've been noticing is that if the number of images is too high, the droplet execution fails. Apparently, if the number of images is past 40-50, multiple droplet commands are passed to PS simultaneously and causes PS to fail. PS cannot execute actions simultaneously on multiple images at the same time. The error returned is "Could not complete the Play command because the action is already playing".
Here is what I've discovered by experimenting with droplets on the command line without LR initiating them:
There is an inherent limitation in the number of characters that can be pass to a command in the Windows OS. That limitation is right around 2048 characters. For example, if I want to pass 30 images to a droplet for execution, the command would look like:
mydroplet.exe c:/path/image1.jpg c:/path/image2.jpg c:/path/image3.jpg...etc
If the total number of characters in this command is more that 2048, the droplet crashes because you have exceeded the string limit of characters for Windows. If your source directory path is long enough like, C:UsersMynameDocumentsMy PicturesTalent Show 2008, each image can use up 50 or more characters within that command. You exceed the limit with just 40 images. My suspicion is that if you export more than this limit, LR breaks up the export into a series of droplet executions by executing multiple droplet commands. I confirmed this because as I increased the number of images exported out of LR, or placed them deep in the directory hierarchy, I can see more and more droplet commands being executed in Task Manager simultaneously. As soon as I pass 40 images, 2 droplets start running, and PS fails due to the error I previously mentioned.
What I don't know is why LR executes them simultaneously? Why not in series so that they will not "clog" up PS?
I want to execute a .JSX file by using Mac Terminal Command like i am doing in MS Windows by using following cmmand: C:/ start illustrator.exe Script.jsx
its working fine but i want to do the same thing in MAC, i am working on an Application in that I am using CS6 SDK to add some functionality in my Adobe Illustrator, but didnt find any method to execute JSX files directoly from VC++/CS6 SDK.
Trying to execute a script with the #include command.
It works great when the path does not conatin any spaces but else it fails and say that it cant find the file. Even networkshares work without spaces.
You may think that i have not tried to enclose it in " " signs but i actually have tried that with no success
#include Y:scriptsClintEastwoodscript.jsx //WIN!!
#include Y:scriptsClint Eastwoodscript.jsx //FAIL!!
#include 'Y:scriptsClint Eastwoodscript.jsx' //FAIL!!
#include "Y:scriptsClint Eastwoodscript.jsx" //FAIL!!
I need to do a form of automation, but wanting to execute this from another process (self-made application). Adobe Photoshop has this mechanism called "Droplets" that are executable based upon Actions defined in Photoshop (as far as I can understand). Is it possible to let AI do some work for you from an external application as with Photoshop (assuming you are able to execute the executable once it has been created)?
View 4 Replies View RelatedHow to load and execute sticky plugin
View 4 Replies View Related