I want to sweep the "cutting tool" through the helix to create a inner thread of my nut. When i set "Align" to "NO" it refuses to sweep. If i set "Align" to "Yes" it works perfectly but the result is of course totally wrong.
[URL].......
I am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
I've been following the Convert 2D to 3D video that is given in the Help section of AutoCAD 2012, and whenever I try to sweep the handle using the same methods that were used in the video it says that it is unable to sweep 1 selected object (when I select the path). I've attached the DWG file.
Also, when I went to use the 3D align feature I did exactly as the video did, but my handle wouldn't align with the side of the mug. It kept lining up with the side but never between the top and bottom of the mug like you'd expect. I kept having to move it to get it down where it needed to be.
why I cant sweep this region. I have tried to flip ucs move region etc.
M10x20.dwgSweep.jpg
I need to create a series of "trays" that are in the shape of letters. I am having some success with certain letters, but zero success with others.
I am creating these letters using a curve brought in from illustrator, and sweeping the profile that I want to use around the curve to create the outside.I am then using presspull to create the base of the tray.
However, sometimes the sweep command will simply say "unable to sweep 1 selected object" with no explanation as to why.
Sometimes I will get the shape that I want, but it is facing the wrong way, and I cannot fix it. Other times it will simply stall and then delete both the curve and the profile.
I have a wall tool whose style has a sweep attached, when I added the tool to the palette it drops the sweep. I know this was a wish list item a few years back. Has the feature been added that allows me to add the sweep to the tool so I dont have to manually import and add the sweep in every drawing?
View 2 Replies View RelatedSolution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies View Relatedgetting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies View RelatedIv just never been hundred percent sure about the perfect
technique! My problem is, when coming to extract say a "model"
from a coloured/detailed background
you spend along time trying
to make the selection as neat as possible,but sometimes have a few
missed bits, what is the best way to make the edges a little neater?
I have tried techniques like duplicating the layer and using things
such as "inner glow" etc
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View Relatedway to remove images from their backgrounds.
Which works best for you? Pen tool, Extract Tool or plugin?
A blade does make cutting easier when you need to do multiple cuts real quick.
View 3 Replies View RelatedI cropped an image using the Cutting Tool, now rather than recreate the image with more height, I'd like to see if I can add some more white background space to the bottom of this existing xcf image (s0 I can add some text) after the fact.
View 1 Replies View RelatedI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
I have been away from PhotoShop for awhile and have not used CS3 for over a year. When I try to use the clone tool a pop up tells me unable to use tool due to a program error. How can I fix?
View 1 Replies View RelatedI can choose any tool either by menu or by shortcut, but only the hand icon remains visible and active. Reopen Photoshop and rebooting mac doesn't work, only solution I have found is: Repair Disk Permissions.
View 4 Replies View RelatedTrim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies View RelatedI'm using autocad architecture 2010. When I click on the tool palettes like the steel command it is tell me. Unable to execute the tool. Unspecified error. How can I get the tool palette to work again?.
View 4 Replies View RelatedInventor isn't letting me use the revolve tool. I got the work axis and the sketch. I attached my part here and I also attached the file that tells how the revolve should look like .
View 2 Replies View RelatedJust upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
The measure tool is not giving me the correct measurement. For example, I offset a line 24' and when I go to double check the distance it is off by .03. That is starting on the original line and doing a perpendicular snap to the other line. So I thought, wait a minute that can't be right, so I drew a line between the two lines and did an inquiry and it gave me 24'.
I also did a dimension which also was correct. I also measured a 97' line and it was off by 3 feet. Never had issues with previous versions of Autocad as far as measuring.
I've recently installed auto cad 2007lt on our new computer. I set up numerous tool palettes with blocks that we use often. I was pulling images from the palettes to my drawing with no problem.
Today when I tried inserting an image from the tool palette it is saying that the image can not be found. I've tried under previous drawings and new templates and have been unsuccessful.
I am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies View RelatedI have created a custom Assembly using Assembly Composer for C3D 2012 and imported it to C3D. Problem is when I try to place the assembly in a drawing.
I get the error message "Unable to execute the tool. Not enough storage is available to complete this operation."
I am trying to create an assembly that will calculate a built volume based on constructed height of the structure.
I have attached the PKT file.
On solidworks, There is an option to rotate the profile along the path as it sweeps. I'm curious if there is anything similar to that ability in Inventor? And if not, if there is a way to create a helix along a curved axis.
View 3 Replies View RelatedI have looked through these forums and found plenty of sweep problems and the answers to the problems but none for this particular type. I made a 3d intersection curve and am trying to sweep a profile along that curve but I keep getting the discontinuous segments error. I am using standard inventor 2011.
View 9 Replies View Relatedsweep.jpg
View 9 Replies View RelatedI have a tunnel profile that I need to sweep around a path. This path is a 3D Polyline but it has arcs and slope associated with it. The sweep command has this automatic banking or twisting to it that just screws everything up. The profile needs to stay perpendicular to the path and the floor of this tunnel needs to remain flat.
I have attached the actual working drawing. It has the profile (which is a simple typical tunnel) and the path all situated.I'm working in AutoCAD 2012 if that really matters.
Trying to create a 3D sweep. I want to keep the sweep parallel to the XZ plane (like a parting surface). In the attached part, there is a SweepSrf3 that has sort of what I am trying to do, but it does not go all the way around the path. Notice how the sweep is parallel to the plane. I tried to do the same thing in SweepSrf4, by selecting the 3D Sketch1 as the path, Sketch2 as the profile, and Workplane2 as the Guide Surface. That failed.
In SweepSrf4, the only way that I could get the sweep to come close to working was to use the 3D Sketch1 as the guide rail and the circle as the Path. Seems like I need to use the circle as the guide rail and the 3D Sketch1 as the path to get what I want... but that fails.
I'm trying to sweep it around shape like this But it won't, it says "The selected path curve is not valid." - so what do I do? (it is polyline) Is there maybe some other way to get this 3D shape fast?
View 8 Replies View Related