AutoCAD 2010 :: Cutting Solid Into Two With Non-planar Cutting Plane
Aug 2, 2012
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies
ADVERTISEMENT
Aug 27, 2013
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies
View Related
Aug 1, 2011
I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
View 8 Replies
View Related
Aug 18, 2012
0
false
18 pt
18 pt
0
0
false
false
false
I have a Toshiba laptop with Windows 7. It has a 500GB HD, 4GB RAM, 16" screen and CorelDRAW X5 and Summa's WinPlot bridge software installed. Everything runs perfectly.
I want to be able to cut vinyl letters from my Summa D75R vinyl cutter and then to cut a different colored outline to be applied over the top of those letters. The letters themselves, that is, the main body of the letters, I can cut with no problem.
I know that I will have to separate the two elements and cut the letters from one file and the outlines from a different file. As an experiment I created a single word with a color. I then created an outline for that word. I deleted the body of the letter leaving only the outline.
I then did a "Convert to Curves" on the outline and imported the image into the WinPlot software that my Summa D75R vinyl cutter uses. I sent the image to the cutter but it cut it as a solid letter. It did not make a double-line cut as it would have to do to make the image an outline.
View 14 Replies
View Related
Mar 6, 2012
Currently, I am using Inventor to produce inventor DWG drawings for our supplies to read using autocad and trueview etc. One of our suppliers is a laser cutting firm and they need us to produce a seperate DXF file from our inventor drawings (for the flat patterns). As this has to be done manualy and is potentially error prone (as drawings can be automaticallyt updated where as DXF's requre a seperate 'save as' we had hoped to be able to just send the Inventor DWG for them to extract the geometry of the blank using their copy of AutoCad. I noticed that when opening an inventor DWG in autocad, the 'model' contains no geometry and it is placed on a seperate tab called sheet 1 (or whatever the sheet was called in inventor).
Is there any way that this data can be extracted from the DWG so that they may manipulate the geometry?
I have attached an Inventor DWG for reference.
View 7 Replies
View Related
May 4, 2012
when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
View 1 Replies
View Related
Jul 3, 2012
I need to send 2D drawings for laser cutting. Opti is the laser software..My issue is that the laser cuts to each grip and gives the cut metal a serrated looking edge.
Removing/simpliying the lines into fewer (microscopic!) segements or being able to adjusts the number of grips.
View 6 Replies
View Related
Dec 11, 2012
know of a way to take a polyline shape (brought in from another program) and save or export it to a dxf at the same time as it being simplified and made "nice" (for want of a better word) so that the cutter doesn't stop every 2mm with the excess vertices?
I've heard of programs like Flexisign which can take a dxf, clean it all up whilst keeping the shape and then export as dxf in a nice polyline. Can You do anything similar with autocad? Seems like one of the front runner programs used for creating geometry for cutting should provide such a service surely?
View 3 Replies
View Related
Jun 27, 2011
I have a drawing where I have to cut a door and window into a small room. I have been able to layout the location of both, but when I highlight to erase around the nodes, it just erases only those. I used the extension object snap to layout the location of both. put nodes on the ends, and centers, of both objects.
View 9 Replies
View Related
Apr 6, 2011
I have 2 pieces of round pipe meeting in a V shape, one of them being cut to sit on the other. I need to make a template so the shop guys can put on the pipe for marking the cut, so if i get the section of pipe modelled in 3D, can i then unroll it to procuce the template ?
View 9 Replies
View Related
Jan 5, 2014
We got a 3d printer and I've been doing a lot of basic designs, right now Im having an issue with trying to figure out how to cut a notch (if that is even the correct wording) in the edge of a plate.
View 2 Replies
View Related
May 1, 2013
I am attempting to take two surfaces and cut straight down through a set polyline and get the difference between two surfaces. Do i want to use the bounded volumes to do this? Or can i simply create two surfaces and and use the analyze/volumes tool and just select the two. I would then add the boundary to each surface to limit the data.
My concern is since the two surfaces do not meet along the edges which will cause the math to be off.
View 6 Replies
View Related
Oct 23, 2012
How would you cut into a flat surface such as a rectangle, to create an opening that is visible in 3D?
View 9 Replies
View Related
Sep 21, 2013
Im building a bracelet, and I built the bottom and top half in 2 files. After assembling them and putting on my pivot point I wanted to use the shape of the tip from the top half to make a matching depression in the bottom half.
View 4 Replies
View Related
Jan 31, 2012
i am trying to find out how to use autocad to nest objects for cutting on a cnc machine. it would require a lengthy discussion and i dont know if this is a appropriate forum for it.
View 6 Replies
View Related
Dec 13, 2011
I would like to import logos in to my cad drawings that i send out for laser cutting. Is there an easy (easier) way to produce a laser ready dxf of complex logos?
I have done a couple in teh past and faught with it the entire way.
View 4 Replies
View Related
Dec 17, 2011
i am trying to use autocad to nest parts for cutting on a cnc machine. is there any way to make a 2d part have a projected boundary of say .5 inches larger than the part so another part cannot nest closer than that. after the nesting is done, the boundary would be removed. the parts are different sizes and shapes so the projected boundary would have to enclose the part.
View 6 Replies
View Related
Sep 4, 2011
I want to sweep the "cutting tool" through the helix to create a inner thread of my nut. When i set "Align" to "NO" it refuses to sweep. If i set "Align" to "Yes" it works perfectly but the result is of course totally wrong.
[URL].......
View 9 Replies
View Related
Jun 22, 2011
I need to cut some flat veneer using a laser machine, like making a jigsaw puzzle. The laser operator needs a drawing in the .dwg format.I will be drawing a 2d shape using a photograph in the background to copy.
I need to make the shape cut up into sections so I can assign a different bitmap to each section, at least for the design part of it. Since I'm more familiar with Max it'd be easier to do the design work there and export the file.
What I need is to make 2 or more closed spline objects that share adjacent lines so that each section has a surface that can accept an individual bitmap.
View 9 Replies
View Related
Sep 2, 2013
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies
View Related
Apr 1, 2013
I need to cut slots in a circular pattern around a flange ring, but I also need the slots to maintain their orientation so the slots are straight.
What I am atempting is to create a shim that once cut can be slid between 2 flange rings and not have to take the bolts all the way out.
I attached a pic of what I am trying to do. The slot has to stay in that orientation, yet patterned around the circle.
View 3 Replies
View Related
Aug 2, 2013
We recently upgraded to 2014 and have been experience significant issues with plotting to PDF. When plotting individual pages, we are able to center the plot and adjust the margins to where they will plot correctly. However, when trying to "batch publish" mutiple layouts of a drawing they all come out off center or parts of them are being cut off.
View 2 Replies
View Related
Dec 3, 2013
I am trying to make a toilet paper roller; standard white ones with the spring inside [URL] .
I need to cut the bottom of the cylinder at a 45 degree angle from the center to wall so if the roller was standing, it would be at an angle of 45 degrees to.
I have attatched what I have so far.
I am having trouble with the slicing. I am not sure how to chop the whole cylnder at an angle.
Also how do I remove the yellow lines and the white line with the measurement .1280 (you'll understand when you open the file)
View 9 Replies
View Related
Mar 21, 2013
I am having some trouble trimming a line using a circle as my cutting edge,the line falls short of the circle,I have tried changing EDGEMODE and still the problem persists!
View 9 Replies
View Related
Jul 23, 2012
I migrated to 2013 last week (from 2012). I have a welded part which consists of only two items: a hub and a plate. I brought in that welded piece into another file which is going to take care of the machining. I machined one side without any issues. The second side refuses to machine the back of the plate. It does everything else but will not cut into the back of the plate.
Please find attached the part I am trying to machine 60077B which is made of 60077F which in turn is made of 50176 & 50204. The final thickness of the plate is supposed to be 1" currently it holds its ground at 1.063".
View 2 Replies
View Related
Dec 14, 2012
im trying to do is print on standard 8.5" X 11" paper but for some reason it keeps cutting off the top and the bottom. ive tried changing the plotter settings around but to no avail. its like theres a certain amount that it refuses to pring on the bottom. no matter what, the is always a .5" gap at the bottom. i can get it to print to the very edge of the top. just having issues with the bottom. ive also tried using plot calibration and all of that is fine
See photo for what im getting. and yes its doing it when i make pdf's too.
View 4 Replies
View Related
Oct 10, 2013
know if a file from a student version of autocad 2014 can be used to laser cut or will there be issues of some sort?
View 9 Replies
View Related
Oct 27, 2011
Is possible to generate with Inventor 2011 (or 2012) PST files (after-process file) for use in a cutting machine? or other similar files?
The same as (for example) generated by software "MASTERCAM"..In my case is for use with ONA machine, that allows to cut real material with wire EDM technology
View 1 Replies
View Related
Dec 14, 2011
I am constructing a pipe (made up by sections) in Inventor. The pipe is going to be manufactured by cutting pieces of metal in a flow jet, roll them, and eventually weld them together.
I was wondering if it is possible to "unfold" the pipe sections to the plane, so I easily can see the cutting lines for the flowjet?
View 1 Replies
View Related
Apr 11, 2011
I am wondering if there is a way to use a part of one piece located in an assembly to cutout a portion of another piece located in an assembly when both pieces occupy the same space?
The situation I'm in is that I've got an L bracket (piece 1) resting on top of a piece representing a concrete block (piece 2). The L bracket has metal studs attached that protrude into the concrete. Idealy I'd like the mass of concrete located in the same space as the studs removed so that when I generate cross sections everything adds up.
View 5 Replies
View Related
Dec 8, 2011
CAM software that will run a hot wire CNC machine used for cutting EPS foam? I am using Inventor to create my product drawings and I want to use an integrated CAM software to create the G-Code to run my hot wire CNC.
View 1 Replies
View Related