Is possible to generate with Inventor 2011 (or 2012) PST files (after-process file) for use in a cutting machine? or other similar files?
The same as (for example) generated by software "MASTERCAM"..In my case is for use with ONA machine, that allows to cut real material with wire EDM technology
I have an assembly with around 120 variants in it. I am getting a little annoyed having to click the OK button when asked:
"Do you want to save changes to 122.iam" and its dependents"
is there any way to set the default to OK?
(other than setting an electric motor and a poking device up)
I have to sometimes make files for a router table, water jets, and plasma cutters. Some of the shapes are created from splines and or polylines. Our router program and some of the programs that our vendors use (water jet and plasma cutter) programs that have major trouble with the amount of control points (nodes) that are required to hold that shape as it should be. When I try to remove the nodes in autocad the shape changes.
One of the methods I have to use is to import the DXF file into Corel Draw X3 and remove all the extra nodes that the program will allow me to delete without changing the shape of the item. This works sometimes depending on the program that the vendor is using. I have to do different things for different vendors, and as I said this only works 50 percent of the time, and I will not know if it worked or not, until the vendor starts complaining about open files or not. On one occasion the final product came in from the vendor, and it was a mess, inside corners were blown out in large circles, and outside corners were rounded off into large circles.
The in house router table issue has been overcome, it is the water jet vendors and plasma cutter vendors that we are still having issues with.
I have created master assembly that has rules to 'save as' the assembly and parts to different locations and with different names. This master assy has links to excel file to get different names
In the same way I am looking the drawings (for both assy and parts) needs to be created and 'save as' to different locations. These newly generated drawings should have links to newly created parts/assembly.
I am able to 'save as' the master drawings to different locations but these newly created drawings still has links to master assembly/parts.
I have generated around 1200 iParts from my drawing and I would like to generate every ipart in an individual ipt. file.
This is easily done by right-clicking the iPart and clicking on Generating Files. But I can't manage to generate all the ipt files in one go. I noticed that I can hold Ctrl and selecting all the iPart, but I would prefer not spending a couple of hours selecting 1200 iPart.
We are using iPart - iAssembly workflow with Inv-2013 and Vault Basic 2013
My question is related to released state of iparts. Currently we are generating/ releasing
all the iparts when new member is added in order to manintain the parent child version relationship
Example : say i have a ipart 41020.ipt and i have members 41020- 001 ~ 008 . I check out the parent
from Vault and add 009 member to it.
Question :
Do I have to generate all and check those in to maintain the version relationship between the child and parent inside
Vault 2013 ?
Or
Only generating 009 will maintain version relationship inside Vault 2013
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
I am looking to generate ipart members for each ipart as I activate it?
View 2 Replies View RelatedIm building a bracelet, and I built the bottom and top half in 2 files. After assembling them and putting on my pivot point I wanted to use the shape of the tip from the top half to make a matching depression in the bottom half.
View 4 Replies View RelatedI'm trying to Copy an Assembly via the Apprentice Server functionality.
But I don't want to copy all files with the filesave as feature. Some of the files, has to be used again as the source file. For Example Content Center files should not be copied. Or maybe also some specific defined internal standard files.
Is there a possibility to get this work?
In the moment, I got all these files via:
[...] For each Element As Inventor.ApprenticeServerDocument In doc.AllReferencedDocuments [...]
maybe it's possible to say something like that:
If Element=ContentCenterDocument then BlaBlaBla
I know, there's an "Inventor.ObjectTypeEnum.kContentCenterObject", but I don't know, how to use it, to check the ApprenticeServerDocument with that.-
How the PMS color palettes "simulate" on screen how the color will print on different substrates (glossy vs matte vs uncoated paper). That's great for comps, but if you convert it to CMYK to print it, and the values are representing a "simulated" color it won't look correct (by that I mean come close to matching the spot color). For example, the uncoated palette simulates the color by making them appear a bit washed out on screen - pretty good visual simulation. But it might do so by adding black and cyan to orange for example, etc. - effectively dulling the original color.
So if I convert that to CMYK within the new Pantone + color palette, and then send it to the printer - it won't appear as it did on screen, it will dull the end color even more because it's converted the color to the dull simulated version - what a disaster! It's only doing half the job - showing us what it should look like on screen. In order to be truly efficient for design professionals the CMYK conversion might remove black and cyan completely to effectively brighten the color in the final output on uncoated paper. I would prefer it just stick to the standard conversion, which Pantone did have as a standard palette option (PMS to process), and then I can adjust if I think it's necessary.
Any corporate branding system will likely start with a PMS spot color palette for the identity. Then it will build into many different adaptations - full color brochures, large format banners and trade show graphics, website, advertising. So any corporate branding system will need to have PMS, CMYK and RGB versions of their main corporate color palette. There was a standard for these translations that was automatically consistent in the Adobe software and that is now all over the place, so it relies on individuals manually adapting the color mixes for final use - what a great way to screw things up.
We have had this issue now for a couple years and don't know what is causing it. We are using vault pro with admin set single project file. A user can work for months using correct.ipj, then randomly at 10:42 they will notice the active project was been changed to some other temporary project location "c: emp.....". Then it will happen to different users at different times. I cant seem to find any correlation to anything. I can only imagine that it is somehow triggered from the vault addin.
We are inventor 1012 and vault 2012 pro.
It's routine generate hatch files. (pat extension). You can use them in Autocad or import in Revit.
Two commands:
DHA - tile paterns.
DHL - construction paterns.
I Hope it's work.
I don't need the capability to print directly to a plotter, but I need to set up a dummy plotter to generate plt files that will be changed to tif files with our Kip. Any plotter driver that works for this situation? Every one I have tried has generated a plt file, but the Kip would not convert it or open it.
View 8 Replies View RelatedIs there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View RelatedI got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
Photoshop CS6 Extened won't play or process Dolby Digital (AC-3) Audio Files from my AVCHD video files.The video plays fine just no sound at all. When processed still no sound. Are there any (AC-3) audio codecs I can download and install. How would I install them. Do I need to convert audio files to another format & if so how & what format.
View 1 Replies View Relatedis it possible to do something like this but to create an shrinkwrap of an IAM and save it as IPT?
View 3 Replies View RelatedWhy do I generate xmp and xml files
View 4 Replies View RelatedIs possible to automatically generate dimensions based on its parameters when creating a view in a particular model ?
View 3 Replies View RelatedIt is possible to generate the model of only one sprocket, without drawing the whole transmission?If possible, how to generate this model.
View 3 Replies View RelatedThe question is 'how to generate ribs out of surface, to machine from wood and assemble the skeleton for doing fiberglass'). URL....Someone generated those wooden ribs, machined it and assembled the shape to fill inside with stereofoam (say), and cover by fiberglass to generate mold.
I failed to find any kind of tutorial that answers "how generate such ribs out of a surface at hand".
I am trying to create a C# program to do batch Title Block attribute updates on selected AutoCAD drawings.
What I would like to do is keep the AutoCAD interface hidden, and just display my custom form which would allow the user to select the drawings that they wish to process.
And then the custom program would load each drawing behind the scenes and update the Title Block attributes, but the AutoCAD interface would remain hidden.
Is something like this possible with AutoCAD 2010? Are there any examples doing something like this (showing a custom form at startup, etc.)?
PS We do have newer versions of AutoCAD available if needed. Our engineers use AutoCAD 2010, but we could use a newer version for this standalone tool which would only be used by 1 or 2 people.
VIDEO STUDIO PRO ULTIMATE....A real head-scratcher... Cannot create discs, files, or instant projects. When attempting any kind of "sharing", the program closes and sends me to the desktop....very perplexing as this occurs on my XP Pro PC, but so far is running ok on a W7 laptop.
View 14 Replies View RelatedI know that Lightroom is unable to generate previews for PSD files if they haven't been saved with the Maximize Compatibility option. But, it seems that once you begin a preview for a folder Lightroom gets stuck in that mode even if you then go ahead and resave the file with the Maximize Compatibility option set to Always.
In a test just now I opened one of the problem files in Photoshop CS6 and saved it. Then I went back to Lightroom and tried to reimport the file but it still said Preview Unavailable. I tried toggling on/off a couple of layers and resaving but it. So, next I actually tried making a change to the file and resaving. That still didn't work. I've tried exiting from the Import dialog in LR and restarting the import and even restarting Lightroom but nothing makes a difference.
If I save a new copy of the file in Photoshop (without changing any settings in my Photoshop preferences) Lightroom i
I've run into a problem with my "Jet.oledb.4" connection string not working for x64 machines. I've done some research and found out a few things, but am still confounded.
The code was written on a x86 XP machine with vb.net 2010 express. AutoCAD will load the dll just fine on x64 machines. Everything will work except the connection to the database. I tried installing the Microsoft Access Database Engine 2010 Redistributable for x64, but couldn't because the MS Office installed is x86!! Instead I installed the x86 version, but got the same unhandled exception at runtime.
Do I need to have the current x86 MS Office uninstalled and then install the x64 version of MS Office on those machines? Is it that the code is compiled as x86? If so, how can I compile to x64? I didn't see any options in settings, and haven't been able to find any examples.
The thing I really don't understand is that the same connection string ( "Jet.oledb.4") works in an old VBA routine on all machines!!
Can I transfer my license back and forth from my laptop (32bit) and my work station (64bit) using the license transfer utility?
View 3 Replies View RelatedI am working using iparts on inventor 2013. How can i save/generate each part created on iparts as a single .ipt file?
View 4 Replies View RelatedIs there any auto generate command to retrive the part drawing from assembly drawing rather than open part one by one to retrive the drawing?
View 9 Replies View RelatedI curently have a rule that generates a part list automatically in a drawing. the problem is that I want the rule to be continuisly running but it keeps generating 2,3,5... parts lists. I need an if statment to check if a parts list already exists.
iLogicVb.UpdateWhenDone = True On Error Resume Next ' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the
[Code].....
I have created a very simple yet effective tool for starting a new manifold assembly using iLogic. The rules and windows essentially fill out the size of the block, material type, description, project and part number.
Below I have a hydraulic manifold I have designed and from that I created the final .ipt of the internals. The way I did this (which may not be the best method) was to create a second .ipt matching the LxWxH of the original manifold, next I inserted and aligned both into another .iam file, lastly I derived a third .ipt from a subtraction resulting in the third image below. This is a bit time consuming to create, but has been very useful in error checking our designs. I would like to see if iLogic is capable of allowing me to automate this so we can easily create these internal flowpath .ipt's for every manifold we design.
I am trying to generate automated drawing for my assembly and iam trying to run the following code
Imports Inventor.ViewOrientationTypeEnum
Imports Inventor.DrawingViewStyleEnum
dim oDrawingDoc as DrawingDocument
dim oPartDoc as Document
dim oSheet as sheet
dim oTG as TransientGeometry
dim oView1 as DrawingView
[code]....
but when i run the code its asks me whether you want to generate the drawings, but when i say yes shows runtime argument error as show below
Error in rule: Rule0, in document: pin
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
when i ask for more info it shows the following error
System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.Documents.Add(DocumentTypeEnum DocumentType, String TemplateFileName, Boolean CreateVisible)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)