Photoshop :: Any Way To Batch Process Color Corrected RAW Files To TIFF Files
Nov 11, 2013
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
View 2 Replies
ADVERTISEMENT
Nov 12, 2013
Working in BRidge and Photoshop CS6:I have 160 color adjusted hi-res CR2 RAW files from my photographer, thought I was getting tifs. I need tifs for my INdesign file. I tried using the photoshop image proecessor through brige by selecting all my images and then saving as TIFFs but I am losing all my color correcting? Is there a way to save these out as tiffs as a group and not one at a time? I also might have lost my color correcting when I copies them all to one folder as well...not sure what is happening except now my great product shots look like crap.
View 8 Replies
View Related
Feb 28, 2011
Question: How do I “Add” multiple TIFF files to a Batch Process so I don't get the "what page" question?The PP9 Batch Process Added – OPENED - files, processed according to my script, then saved the result to new type & folder.
X5, a recent purchase, does an IMPORT of TIFFs instead of an OPEN and wants to know what page I want to load. Answering this on each file defeats the purpose of batch processing. How I should write the script?
View 5 Replies
View Related
Jan 19, 2014
how to properly link my footage on my timeline to color corrected files from film convert. I know how to do it to each individual clip at a time, but when I select a whole folder, it always relinks the media to it's original destination and not the new destination with the color corrected files. What's the correct way to link multiple clips to new source files?
View 13 Replies
View Related
Aug 20, 2012
My camera out put is in JPEG I have no choice. While I can process jpeg with no problems in CS5 is there a better way to do this? would I be better off converting the JPEG to either tiff or psd and then process the file and then reconvert back to jpeg as the final product. I have heard so much about "lossy"(jpeg) vs "non Lossy" (tiff and psd) which are the ones I want to use?
View 5 Replies
View Related
Feb 27, 2012
Process a batch of files?
View 5 Replies
View Related
Jun 12, 2013
I am trying to figure out how to batch process multiple files with Elements 11. I have installed Imagenomic Plug Ins with Elements 11. I have also installed the supplied ATN action files created by Imagenomic for Photoshop. These actions work fine with Elements 11. I need to figure out how to utilize, or select, the Noiseware Plug In option within Elements Batch Process configuration window. It appears I can only apply the default mods provided by Elements and can't see any of the Imagenomic Plug Ins as Batch Process options.
View 3 Replies
View Related
Oct 4, 2012
How the PMS color palettes "simulate" on screen how the color will print on different substrates (glossy vs matte vs uncoated paper). That's great for comps, but if you convert it to CMYK to print it, and the values are representing a "simulated" color it won't look correct (by that I mean come close to matching the spot color). For example, the uncoated palette simulates the color by making them appear a bit washed out on screen - pretty good visual simulation. But it might do so by adding black and cyan to orange for example, etc. - effectively dulling the original color.
So if I convert that to CMYK within the new Pantone + color palette, and then send it to the printer - it won't appear as it did on screen, it will dull the end color even more because it's converted the color to the dull simulated version - what a disaster! It's only doing half the job - showing us what it should look like on screen. In order to be truly efficient for design professionals the CMYK conversion might remove black and cyan completely to effectively brighten the color in the final output on uncoated paper. I would prefer it just stick to the standard conversion, which Pantone did have as a standard palette option (PMS to process), and then I can adjust if I think it's necessary.
Any corporate branding system will likely start with a PMS spot color palette for the identity. Then it will build into many different adaptations - full color brochures, large format banners and trade show graphics, website, advertising. So any corporate branding system will need to have PMS, CMYK and RGB versions of their main corporate color palette. There was a standard for these translations that was automatically consistent in the Adobe software and that is now all over the place, so it relies on individuals manually adapting the color mixes for final use - what a great way to screw things up.
View 3 Replies
View Related
Jul 28, 2012
Is it possible to take 3-4 effects, all mixed together, like brush stroke, solarise, warp sharp, neon... mix them all together, and process a number of pictures while changing the mix level of each effect, and also varying some of the effect settings, such as brush size, brightness, etc...
are there any scripts that can do that? any macro plugins that can control other plugins? is there a crafty programming trick that could be fashioned to vary and mix effects across a task of batch processing?
View 3 Replies
View Related
Sep 6, 2013
I made a Photoshop® script (action) which works perfectly. (Open .PDF files in Photoshop®, to after save them as .JPG files into another folder)
The problem comes when I launch a batch process. It takes a while to the computer to open the large .PDF files, and when a file is opened, well it doesn't go through the whole script. In fact, Photoshop® already open the second file and so on. Then without running the rest of the script/action .
View 2 Replies
View Related
Sep 25, 2013
I have been trying to batch edit several JPG files using "perfectly clear" but I keep getting an error. It complains that FileSaveAs is crashing. I spent some time looking at the corel files and they says something about "FileSaveAs" won't work if it not in the "Scripts-Trusted" folder. However I cannot find it (FileSaveAs) so I can move it over to the Trusted Folder. I CAN find the scripts-trusted folder.
Batch processing several files using "Perfectly Clear"?
View 3 Replies
View Related
Jun 27, 2013
I am trying to batch convert several thousand TIFF files to lossless JPEG-2000, but I can't get it to work.
When I open a single file and "Save as" JPEG-2000 with the lossless option checked, the result is truly lossless. But when I record this as an Action and then Automate/Batch this action, the output is not saved as lossless.
View 10 Replies
View Related
Jun 20, 2001
Is there any way of running a batch process to convert a number of AutoCad drawings into Tiff format, at once? Also, if a batch process is not available, can we save our plot settings for conversion to Tiff so that they can be recalled at a later stage? We would like to be able to transfer the same plot settings to other PCs so that we are all producing the same formatted files. Are the plot settings transferable?
View 5 Replies
View Related
Sep 20, 2012
Is there a way to do batch process of converting .jpg or .tif images from RGB to CMYK?
View 2 Replies
View Related
Jun 17, 2012
I am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
View 4 Replies
View Related
Sep 17, 2012
I shoot in RAW and use the Develop module in Lightroom. I want to save the corrected RAW files as JPEGs. Do I export them to Photoshop to save them as JPEGs?
View 2 Replies
View Related
Jun 13, 2013
Photoshop CS6 Extened won't play or process Dolby Digital (AC-3) Audio Files from my AVCHD video files.The video plays fine just no sound at all. When processed still no sound. Are there any (AC-3) audio codecs I can download and install. How would I install them. Do I need to convert audio files to another format & if so how & what format.
View 1 Replies
View Related
Jan 20, 2008
I am making sets of wedding stationary for a photography studio. Each set contains an invitation, dinner card, place card etc.
Each set has a dominant color throughout the series.
What I want to do is offer each set in a variety of colors but going through each image, replacing the color in each layer with the new color for each image in the set would take forever.
Is there a way to "Batch process" this where I can replace a color in each image with a new color. I think I may have to make a separate action for each new color I want to use but that is still better than nothing.
Also, I need to keep the new images in layers as the studio wants the ability to go in and make layer changes if necessary.
View 3 Replies
View Related
Mar 20, 2012
I have a couple thousand AI authored EPS files with a specific swatch name (SpotBlack) that I would like to rename (black) -- is there any method to do this en masse, preferrably outside of Illy using a text editor?
View 7 Replies
View Related
Oct 30, 2013
I am trying to attach a number of tiff files to individual dwg files. There are about 300 so I am writting a script that will open a new dwg, insert the tiff and save the dwg at a given name, so i have filedia set to 0 and everything is user input.
The problem I am having is that when I use the iinsert command and enter the path for the tiff I get this error: (filename)was not found or is not valid. This is pathed to a network drive. When I copy the same folder to my c: drive and run the command everything works as should. is there any reason for this?
When pathed to the c: drive and working correctly it looks like this:
C:UsershbrittDesktop11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
When pathed to the network it looks like this:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
I get this error:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70 was not found or is not valid.
I noticed in the error message it cuts the end of the file name off. Is there a character limit?
I have done this before with a path to the network and everything worked as should. We have recently upgrade to 2013 but i would'nt think that would be an issue.
So basically, file on local drive everything inserts fine. File on network, get error.
View 3 Replies
View Related
Apr 17, 2012
When trying to export RAW files to TIF files I get following Warning message:
Unable to Export:
An internal error has occured: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.
This happpens in LR 4 and I never had this problem in previuos version.
View 3 Replies
View Related
Dec 20, 2012
A simple action.
File>Export>.bmpClose
If I run the action on one file, it works perfect.
If I try to run it as a batch, it creates the bmp files fine.
But it also creates either a .ai file, or two .eps files!
Writing one or two extra files signifiantly shows the process down.
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
Illustrator CS4. Windows XP
View 1 Replies
View Related
Nov 19, 2009
As an organization, we have opted to go with STB as we have some complicated requirements that CTB doesn't accommodate. The wisdom of that decision is a moot point and I'm aware of the vast array of opinion.
We have a legacy of CTB drawings that occassionally need to be brought forward when projects get resurrected (state government highway designs are prone to getting shelved).
Up to AutoCAD 2009, I've had a VBA routine that performed a few operations on a list of files stored in a text file:
- Open the file
- Convert to STB using "CONVERTPSTYLES" with a specified STB file.
- Run a script to load a layer state file to change the plot styles from Style1, Style2 etc, to their correct named plot styles.
- Manage a recalcitrant layer that refused to play ball.
- Save and close the document
- Get the next file........
This was all fine until 2010 came along with the announcement that VBA was to be phased out. 2010 is OK with the VBA enablers, but now I've got some work to do.
Our organisation's development language is C# and I'm using Visual Studio 2008 Professional Edition to develop my C# .NET code.
Is there another mechanism than "SendStringToExecute" for sending a command such as convertpstyles to AutoCAD and getting .NET to wait for it to finish before proceeding.
I've got CommandEnded code that handles waiting for MTEXT and DTEXT commands to finish and I've tried constructing a CommandEnded for CONVERTPSTYLES, but it seems to me that commands that throw dialogue boxes such as CONVERTPSTYLESand SCRIPT aren't handled the same way.
I've tried setting FILEDIA to 0 prior to running the CONVERTPSTYLES command, however the message box that CONVERTPSTYLES presents before asking for the STB file appears to be getting in the way.
View 1 Replies
View Related
Nov 4, 2013
I have CS5 and CS3 on a system with Windows XP. My monitor is calibrated and I use a control print file for visual reference. I am unable to get corrected color on this system. The reference print looks fine in Windows, but way off in PS. I believe all my preferences are set correctly.
View 6 Replies
View Related
Mar 19, 2012
The pictures came out fine. But then I upgraded to a (then) newer version of ACDSee, and the first time I opened the folder with these pictures in them, ACDSee turned them all magenta. ACDSee claims that this is impossible – but I assure you it happened...
I’ve posted one of the pictures here, including a screen shot of the Info pallet while the cursor is over an area of the image. As you can see, there isn’t any info for the yellow or black channels.
My question is – is there any hope for restoring the proper color to these images? I‘ve played around a bit with Curves, Hue & saturation, etc. - but getting natural color has eluded me. [URL]
View 3 Replies
View Related
Sep 24, 2012
I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. I'm operating on windows 7 64 bit. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions,
but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close.
View 15 Replies
View Related
Feb 18, 2013
What do I need to process raw files in Photoshop CS5 for a Canon Rebel EOS t4i?
View 2 Replies
View Related
Jan 10, 2013
I have finished scanning a number of old family photos and have used Adobe Photoshop Elements 9 (PSE9) to “tag” and add “captions” to each photo. The photos vary in size and are saved in tif format. All of the work I have done so far was using the Organizer in PSE9.
When using the slideshow function of PSE9, I can view the photos and see the caption written over the bottom of the photos. Using other software to view the photos does not show the captions.
I have gone to the Edit screen of PSE9 and under File there is Process Multiple Files. Clicking that I have selected the options in the Labels section to add a caption, checked description, default font, 75 Opacity, default color. Having processed the multiple files, I thought when opening the processed photos I would see the caption I entered in the Organizer along the bottom of the photos. However, the caption does not appear when I view the photos. Am I misunderstanding something here? Would the captions only appear if I print the photo?
View 3 Replies
View Related
Nov 1, 2012
I use PSE to correct scanned color film negatives. If I know the temperature of the light when the photo was taken can that value be input into PSE to correct to daylight? I'm not referring to any kind of hue adjustment via slider bars, but the actual degrees Kelvin.
View 1 Replies
View Related
Aug 2, 2012
In Photoshop CS6 when I save a TIFF file it saves with the .sgi extension. When I save a png it saves it with the .raw extension. I haven't had this problem with previous versions of PS. I'm on a Mac with OSX 10.6.8. I also noticed that I have a plugin in the Plugins folder that's called SGIRGB.plugin. What's going on with saving in these file types or what this plugin is?
View 3 Replies
View Related
Oct 25, 2013
Occasionally my TIFF files open in ACR instead of opening directly into Photoshop. It doesn't happen with every file. Why would this happen? How do I prevent it?
View 1 Replies
View Related
