When trying to export RAW files to TIF files I get following Warning message:
Unable to Export:
An internal error has occured: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.
This happpens in LR 4 and I never had this problem in previuos version.
I run Lightroom 4.4 under Apple OS X10.4.4..When I export files Exif Tool (in Graphic Converter) under ICC header shows for Jpeg "Primary Platform = Microsoft and for = Tiff Apple; and under ICC Profile Color profile for Jpeg = HP but Adobe 1998 for Tiff. I can see that there is a difference between the profile for Jpeg and Tiff (eg sRgb and Adobe1998) but don't follow why the Primary platform differs and shows Microsoft for Jpeg and that the jpeg profile is HP
View 2 Replies View RelatedBeing an architectural photographer I create a lot of layered files with many exposures with different lights on and daylight separately. I always save my layered files in a folder called Layered files in the project. I also save flattened 8 bit Tif's at full resolution for my client as a print file in a separate folder along with another folder for web and device optimized files. When my client opens some of my flattened files they tell me the only see one layer. When I open some of them in Preview I get the same result. I only see the last layer I put into my layered file. But when I open the same photo in Bridge I see the full flattened file as I saved it. What can I do about that?
View 3 Replies View RelatedWhen I try to export retouched files to hard drive files my Mac crashes and has to be force quitted. I thought this maybe a L'room 4 problem so I bought L'room 5 and it's still happening. What can I do?
View 3 Replies View Related how to migrate my Aperture Library into Lightroom 5.3. Therefore I use a trial version of Lightroom and Aperture 3.5.1 on OS X 10.9.1.
To keep my edits on the raw files, I exported them into tiff files and then imported them into Lightroom.
Unfortunately all the tiffs appear to bright in Lightroom. In the screenshot you can see preview showing the tiff as it would appear in Aperture and the much brighter representation in Lightroom.
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
I am now shooting both digital and analog. When processing RAW files coming from my digital cameras, I don't have any problem with LR. But I am also scanning negative films and handling the resulting TIFF files in Lightroom. Since I have started this new workflow, I can be sure that Lightroom will crash at least once during a session. This can happen at any time when I'm in the Development module.
I'm running an Intel iCore 7 2600 PC under Windows 7 Ultimate 64-bit with 8GB of memory and plenty of disk space.
It was working ok and then LR 3 stop bringing in the images that I sent to PS (CS5) to edit..it does not bring them into my collection.
View 4 Replies View RelatedI have thousands of tiff files in my LR 4.1 catalog. I'd like to convert all of these files to tiffs that use zip compression. Preferably, I'd like to do the conversion in-place but LR won't allow me to overwrite the originals in-place.
So, I think I have to either export all of the images and either add them to the catalog during the export process *or* manually import them again.
I do *not* want to lose any of the LR edits I've made to these files and I think I will do exactly that if I use either of the conversion methods I noted above.
I'm using LR 4.3 and CS5, with ACR 6.7 installed. Whenever I'm using "Edit in PS CS5" comand inside LR, automatically I'm getting a duplicate TIFF file added to my LR catalog. How can I avoid this?
View 16 Replies View RelatedI have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine,
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
I have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine, and i have earlier had support from this forum regarding lens-profiles using .tiff files, with great success.
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
I am trying to attach a number of tiff files to individual dwg files. There are about 300 so I am writting a script that will open a new dwg, insert the tiff and save the dwg at a given name, so i have filedia set to 0 and everything is user input.
The problem I am having is that when I use the iinsert command and enter the path for the tiff I get this error: (filename)was not found or is not valid. This is pathed to a network drive. When I copy the same folder to my c: drive and run the command everything works as should. is there any reason for this?
When pathed to the c: drive and working correctly it looks like this:
C:UsershbrittDesktop11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
When pathed to the network it looks like this:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
I get this error:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70 was not found or is not valid.
I noticed in the error message it cuts the end of the file name off. Is there a character limit?
I have done this before with a path to the network and everything worked as should. We have recently upgrade to 2013 but i would'nt think that would be an issue.
So basically, file on local drive everything inserts fine. File on network, get error.
I noticed that converting tiff to dng makes the files smaller.Is there any reason not to convert them? Is the compression completly lossless? Will it be slower?
View 2 Replies View RelatedIn CS6 I work with .tiff files and then export them to LR4 for editting. When I try to export the files back to CS6 they are converted to .jpeg files. Why?
View 4 Replies View RelatedI edited some tiff files and then exported them as jpg files to a different folder. I want to go back and work on some of the original tiff files but they no longer show up in the lightroom library or develope modules even though they are still on the disk. Lightroom sees the original files in the import dialogue but will not let me reimport them either. The exported jpg files are shown in the library module. How can I work on the original tiff files.
View 3 Replies View RelatedI have a trouble with metadata conflicts.
I'm not making any adjustment in Lr. I'm just opening, editing and saving a TIFF file in Ps and I'm always getting the following warning. What can cause a metadata conflict for such a case?
I'm having a problem seeing a file in LR 4.2 when it is in the folder where I want it to be.
I created a composite tiff image from two raw files that reside in two different folders. I had exported the two raw files from LR as tiffs, opened the tiffs in Photoshop CS5, then combined them into a multi-layer tiff to create a 600+MB composite file. That composite was saved in Photoshop under a new file name using "Save As" . I knew the new composite file would not be in the LR catalog until I imported it. When I imported, the image went into a new date-named folder (call it folder "A"). So far, it all made sense to me.
From this point on things got funny. Working within LR, I tried to move the uniquely named composite from folder A into the folder that one of the component files came from (call it folder "B"). The Move failed. Instead, I got an error message saying the file already existed in "B." I could not see the file in "B" using lightroom, but MS Explorer revealed that the file was indeed there. I don't understand how it got there.
Still trying to get my composite in "B" recognized by LR, I first deleted the composite from "B" using explorer, then went into LR and moved the file from "A" (where LR recognized it), into "B". Still no good. LR does not show the file in "B", yet it appears in explorer.
I suppose I could live with this composite file in its own folder, "A," but that is not really where I want it. More importantly, I don't understand why I can't see it in LR in the folder where i want it.
- Is my catalog file damaged?
-Might the XMP files have anything to do with this?
-Is the size of the file (>600MB) a factor?
Win 7, LR 4.2, PS CS5.
Every time I open a RAW file into Photoshop CS5 from LR3, it automatically creates and saves a PSD or TIFF file. Is there a way to stop lightroom from doing this? When I used LR2, I saved these files only if I choose to. I always convert my files to jpg after I'm done editing in PS and don't need these huge files hanging around.
View 13 Replies View RelatedI'm using Lightroom 4.3 to add a copyright watermarking image (png) to existing tiff files for website use. I have several different png files made using Photoshop Elements, with the copyright text set at different transparencies, eg 20/30/40 percent opacity, so that whichever one I use in Lightroom I can always leave the opacity setting in the watermarking dialog at 100% and the images are scaled proportionally to 35%.
The problem is that every time I export the files after setting the watermark position etc, I notice that there is a noticeable loss of both contrast and colour in the newly made tiff files.
Lightroom 4.3, Windows 7, 64-bit.
I am trying to export some raw files to jpg and they continually won't export! I can try over and over, some will evidentually export but others won't.
View 1 Replies View RelatedFor an unknowed reason, my raw files do not export from Lightroom v4.3 to CS6. When I want to make some retouching with a .CR2 file in Lightroom v4.3 in CS6 when I hit command-E it opens CS6 but the file does not import in CS6.
View 2 Replies View RelatedA simple action.
File>Export>.bmpClose
If I run the action on one file, it works perfect.
If I try to run it as a batch, it creates the bmp files fine.
But it also creates either a .ai file, or two .eps files!
Writing one or two extra files signifiantly shows the process down.
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
Illustrator CS4. Windows XP
I use lightroom almost daily, but I'm stumped on this. I am trying to export files to my portable hard drive, but it's not allowing me to choose that. The only options are from My Desktop and My Pictures, Etc. But My comptuer is not showing up?
View 1 Replies View RelatedLightroom is current unable to export files (this has happened mid session) It tells me that the file could not be found dispite having just been worked on in lightroom and external editors (Nik software)Testing this it is now happening to all files. There are no tell tail ? marks against these files and all catalogues appear to OK.
Mac OSX 10.6 Lightroom 3.6
Mac Pro
Model Name:Mac Pro Model Identifier:MacPro3,1 Processor Name:Quad-Core Intel Xeon Processor Speed:2.8 GHz Number Of Processors:2 Total Number Of Cores:8 L2 Cache (per processor):12 MB Memory:4 GB Bus Speed:1.6 GHz Boot ROM Version:MP31.006C.B05 SMC Version (system):1.25f4 Serial Number (system):3T91400F1LY Hardware UUID:A31A73F4-7213-5FD9-BD0F-510B9C638369
I have exported some files and reimported them into a new catalog. LR either will not let me export the.tiles- saying they are unsupported or if they do export they are damaged.
if I export the files as a new catalog they are fine.
when I check the exported files in windows explorer they have lines going through them.
I am working on my laptop Win 7 64 bit using Toschiba esata external drive.
this is not happening on my desktop just my laptop
I have upgraded from LR3 to LR4.3 and need to Export files (not galleries) to FTP site. When chose EXPORT, the drop down for EXPORT TO does not have FTP option .
View 1 Replies View RelatedExport files to disk or CD?
View 6 Replies View RelatedWhy I can't export my photo's into DNG files? I don't see my pictures anymore, only DNG-graphics show up when I try to export them in DNG. My client needs the DNG versions today for his new website!!!
View 10 Replies View RelatedSay I have a file with the following history:
Export
Crop
White Balance: Custom
Auto-Tone
Import
If I then import the exported file, the copy has all the changes but none of the history. If I don't like the crop or any of the other previous changes, I can't revert back to the original file. How do I go about exporting file history?
I am unable to export any files from LR5. This just barely started happening. I have not had this issue, and I have been using LR5 for a few weeks on two different computers with no problems. I have checked all my settings several times, and tried restarting the program. It still won't export! It goes through all the files, and then a little pop-up window comes up saying it could not export the files.
View 1 Replies View Related