I have a trouble with metadata conflicts.
I'm not making any adjustment in Lr. I'm just opening, editing and saving a TIFF file in Ps and I'm always getting the following warning. What can cause a metadata conflict for such a case?
I set up a smart collection with the setting of Metadata Status Is Conflict Detected and for some reason the collection has virtual copies in it which I created for darkening skies and such. Why virtual copies would be considered in conflict with files on the HD.
View 5 Replies View RelatedAfter upgrading to Lightroom 4.3 in Windows 7 64Bit I often get random problems during DNG developing. The first problem: LR during developing shows on image thumbnail the exclamation mark icon of "metadata conflict" warning (see attached screen snapshot). This problem occurs when an external program (i.e. PS) has modified the DNG file and LR Catalog is not synchronized. Of course no modification at all has been done externally by any software but LR itself! It seems a problem of DNG/catalog sync that in some cases fails (very disappointing). The second problem is the black exclamation mark (see again attached screen snapshot) that means problems during reading DNG!! This problem is absolutely random too. Developing is still possible on this files and usually the problem disappear ...
This problems don't affect proprietary RAW files (NEF from my Nikon D300s) and I've never seen them in Lightroom 4.2.
Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.
View 9 Replies View RelatedSInce I upgraded from Lightroom 4.3 to version 5.0 I and having problems when saving files to my computer. The anomaly is that it isn't all the time. The files are being saved with a .conflict extension. when exported from Lightroom. - For example tornado.conflict1 when i name the file tornado.
View 4 Replies View RelatedI used the Lightroom beta 3.5 beta with CR 6.5 beta and now have installed the update of these two products. In beta I was able to open Phase One IQ raw files just fine but now with the 3.5 release I obtain a funny Magenta color cast that displays in the Library Mode and thumbnail but does not display in the Development Mode. This happens on both my Mac Laptop and workstation. Mac OS 10.6.8. I have not yet tried uninstalling LR and reinstalling, will do that next. The first image is in the Library mode after I have opened the file. The second is from the Development Mode. Notice how the tumbnail at the bottom remains constant but the small image on the left has changed in the Development mode to its natural look.
I should say that this color cast happens after I adjust the temperature settings of the image, not just from mearly opening it in Development.
I am transitioning to using RAW files more often. I add metadata, including GPS info, captions etc. Then invariably I need to get JPEGs to someone and have to go through the hassle of exporting the RAW as a JPEG with the metadata.
Is there a way I can get that metadata into the sorta sidecar JPEG file on my Mac without having to go through the export process?
I suppose I could designate the preference that on import the RAW and JPEG were treated as separate files; could I then just copy the metadata in? I haven't really worked with separate JPEG+RAW before. Would it happen automatically if I stacked them? Haven't really explored that.
It just seems that every time I have decided to use the RAW invariably I need the JPEG and if I don't have LR available (say I'm working on someone else's computer but accessing my own files)
I have converted a large number of Canon and Nikon raw files to DNG using Adobe DNG Converter (version 8.2.0.94).
Using Lightroom 5.2 I wanted to change metadata in these master DNG files. I import the files into a catalog, select all, modify the metadata, then invoke the Metadata->Save Metadata to Files... For many (but not all) of the files I get the following message:
"Could not write metadata. Unknown file formats."
The DNG files reside on a Synology NAS server. If I copy them to a local disk I do not get the above error. But I would like to make metadata changes to the files on the NAS.
I do not have problems importing or viewing DNG files from the NAS. Why does LR 5 have problems writing DNG metadata to the NAS? How can I fix this?
Curious to know why and what is causing the metadata in files to change outside on lightroom. I will save a selected bunch of files and then moments later the end up with the metadata status of being changed outside of lightroom. They are not being opened in photoshop nor bridge. What would be causing them to be changed outside of lightroom and have the metadata status switch to "Changed on Disk"
View 2 Replies View RelatedI have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again.
View 3 Replies View RelatedI Upgraded recently from LR2.6 to 3.3. Many of my images have an Exclamation Mark on them, following the upgrade, informing me that there is a Metadata Mismatch.. When I click on it I get this Dialogue box:
Firstly I think LR developers are playing with potentially important information with a lack of care and consideration. I looked at the metadata in 'File Info' in Photoshop before clicking anything: the creation date was the date the file was created and much of the camera data was missing. After I clicked Overwrite Settings all the original data was back on the file. How this came to pass exactly, but it shows metadata is an easily lost thing. If Adobe care about their customers I would think they would make it more clear what was at stake here!
Secondly I would like to know if there is a way to search for all images with this issue to save me having to go through and do it one by one, possibly thousands of times?
In Library Module of LR4.4 under Vista 32, I have corrected a "Capture Time" of a single jpg Photo via the "Edit Capture Time" dialog. The new date correctly shows up in the "Date Time Original" EXIF field of the Metadata panel on the right.
Now, I want to sync that date to other jpgs which all come with incorrect "Date Time Original" - so, I highlight the above photo, mark the other ones to less light grey, press "Sync Metadata". THe dialog of "Sync Metadata" appears, showing the new date under "ICPT image" as "date created" - so far so good. I mark that field, and press the ok button and the sync runs. After that, no change is shown to the respective field of any of the photos metadata fields to be sync'd, no sync has actually happened, and even the "Save Metadata to file" command does cure this situation.
Using the command with a single target file instead of multiple ones does not work either.
Why can't I update a set of superold pictures to their correct "date created" date via Metadata sync? This Metadata sync does not sync.
A while ago I edited some dng´s in Lightroom and saved the metadata to the files. Now I need to do some changes and the dng´s look just like the RAW files (unedited). Where do I find the metadata that was saved to the dng files?
View 15 Replies View RelatedI just experienced an unusual occurrance. I am using lightroom 5.2 on windows 7. I have been using lightroom since the original beta.
I just finished hours of editing DNG files. I selected all the thumbnails and dragged them to a collection. I noticed that after dragging them down that all the thumbnails showed the icon that there was a conflict in metadata. I selected all the thumbnails and reset the metadata. I lost all my edits.
Unfortunately, I had not yet saved a new catelog.
I've just had a problem with LR4. Instaled the full version a few days ago on my old computer. Just got a new computer where I instaled LR4 and imported all my latest work and noticed that all video (.mov) metadata were not saved on to files (Photos are OK!!!) So all editing and rating/flags/color filter I've done is gone.
Thought that I forgot to save Metadata on my old computer and did a couple of tests.
I did some rating and some color filters on my actual catalog then saved the metadata a couple of times. Removed from the Library and re-imported and the metadata were not there again. Did the same to Photos and is fine!
LR4 does not write XMP to video files?
Just lost hours of work on cuting and rating a video Job since my old computer is gone.
I have been wondering why my backups (differential) weregetting larger than they should, and I noticed that some of the files (.psd and .jpg, and mayde few .tiff) were modified. Interestingly, I do not see this happening to cr2-files, that I mostly use. After trying to figure out what's going on I noticed that corresponding xmp-files were modified also. This is not the issue due to their small size, but still I had not edited images that were changed for quite a while.
Change that I see in xmp-files is rather large, and presumably related to Adobe's change in xmp-data structure. Eg.
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 5.3-c007 1.136881, 2010/06/10-18:11:35 "><x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40 ">
In addition to the sample above, whole xmp structure is changed. So I presume that maybe LR is writing metadata chages to xmp in the background?
What I find disturbing is that when checking changed jpg files, I saw the similar data written into the jpg files also (files were created with oldish Canon 20D, and not edited for quite a while). These are examples from changed jpg-files (not the same from which the abone xmp-data change was taken, but similar change is visible in the corresponding XMP):
Also jpg-file from offset 0x04 was changed from "50 60" to "51 18". Also offset 0x10 was changed (16 bits). I have Lightroom configuration option "Include develope settings in Metadata Inside JPEG, TIFF and PSD Files" not selected. The option "Automatically write changes to XMP" is selected. To my understanding neither of these should not have impact to the issue. Is there something else I should check?
Change is made most likely by Lightroom 3.5 version, and has not occurred with previous versions. I have not notices this happening with 3.6, but I have been using it only few weeks. Is this known issue with previous version 3.5, or am I missing something obvious? System running is Windows 7 pro 64bit. I have not have any issues with LR lately, except crashes that I white about a week ago.
When trying to export RAW files to TIF files I get following Warning message:
Unable to Export:
An internal error has occured: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.
This happpens in LR 4 and I never had this problem in previuos version.
I imported many files that were tiff & jpeg pairs (with the import preference box checked 'Do Not treat as seprate files when file names are the same') into LR3. Since then, i have been unable to write new metadata, such as captions, keywords, etc., to both the JPG and Tif files. LR3, and now also LR5 both only seem to want to write to the tiff files. How do i get the metadata easily saved onto the jeg files as well? (preferably without re-importing as separate files).
View 5 Replies View RelatedLightroom doesn't import my GPS data - it is there in the RAW (NEF) and jpeg files but doesn't show in the Metadata within Lightroom. Nikon View NX shows the data but I want to use Lightroom!
View 5 Replies View RelatedI want to wash my .jpg files through LR 5 in order to display the filenames. Via the Slideshow module I have been able to select and direct the displaying of the desired metadata option. When I export the files the displayed metadata information does not make the trip.
View 7 Replies View Relatedi always wondered.... is there a reason why color lables are only stored in the catalog and not in the files xmp fields?
View 6 Replies View Related how to migrate my Aperture Library into Lightroom 5.3. Therefore I use a trial version of Lightroom and Aperture 3.5.1 on OS X 10.9.1.
To keep my edits on the raw files, I exported them into tiff files and then imported them into Lightroom.
Unfortunately all the tiffs appear to bright in Lightroom. In the screenshot you can see preview showing the tiff as it would appear in Aperture and the much brighter representation in Lightroom.
I use LR5 to manage RAW/JPG/MOV files from events where I have taken pictures from. Most of the MOV files do either come from my Canon Camera or from my iPhone.
I regular export the files in a reduced file back to my iPad or iPhone for "public" viewing. Unfortunately LR5 is loosing all metadata from my videos, especially creating date/time and GPS tags.
Is there any way to include metadata in exported (and compressed) video files ? It works in photo's very well.
If not, do you know any other program which can compress original video files from my iPhone and keep the metadata ?
I am trying to open Lightroom 4 from my desktop and it keeps giving me this message:The Lightroom catalog named "Lightroom 4 Catalog" cannot be opened because another application already has it opened.
View 1 Replies View RelatedI am now shooting both digital and analog. When processing RAW files coming from my digital cameras, I don't have any problem with LR. But I am also scanning negative films and handling the resulting TIFF files in Lightroom. Since I have started this new workflow, I can be sure that Lightroom will crash at least once during a session. This can happen at any time when I'm in the Development module.
I'm running an Intel iCore 7 2600 PC under Windows 7 Ultimate 64-bit with 8GB of memory and plenty of disk space.
It was working ok and then LR 3 stop bringing in the images that I sent to PS (CS5) to edit..it does not bring them into my collection.
View 4 Replies View RelatedI have thousands of tiff files in my LR 4.1 catalog. I'd like to convert all of these files to tiffs that use zip compression. Preferably, I'd like to do the conversion in-place but LR won't allow me to overwrite the originals in-place.
So, I think I have to either export all of the images and either add them to the catalog during the export process *or* manually import them again.
I do *not* want to lose any of the LR edits I've made to these files and I think I will do exactly that if I use either of the conversion methods I noted above.
I'm using LR 4.3 and CS5, with ACR 6.7 installed. Whenever I'm using "Edit in PS CS5" comand inside LR, automatically I'm getting a duplicate TIFF file added to my LR catalog. How can I avoid this?
View 16 Replies View RelatedI have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine,
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
I have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine, and i have earlier had support from this forum regarding lens-profiles using .tiff files, with great success.
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
OK, so Sony in all their wisdom decided to hide nearly all the metadata from AVCHD videos in .modd and .moff files, which almost nothing seems to read. I don't suppose there is any way to access that data in Lightroom itself, and then embed in the file's metadata, or at least put it in the LR database??
I have also searched for a third party solution, and no beans. Sony Play memories Home can read it, but then can't do anything with it!
In a related issue, LR does show that there are the two sidecar files, but then fails to move them when the AVCHD files are moved.
It was disappointing that LR 5 didn't improve video features at all.