Lightroom :: Raw Images Opened And Saved As TIFF Of PSD In Photoshop Not Added To Library
Apr 4, 2013
Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.
View 9 Replies
ADVERTISEMENT
Aug 8, 2013
I have spent the entire day trying to solve this and I finally found a fix but not the cause. I have tried all the typical ways to sync/read/render to see the xmp data in LR.
After all of this I found the only way for me to see the xmp data is to open the xmp as a text document then save it go into lightroom read metadata and it shows up. This obviously isnt a workable solution for thousands of files so I need to find a cause.
So a little info. I'm using LR5 on a windows. I edit clients images then send them the xmp files with those edits. I have one client thats photos when imported do not show metadata or develop adjustments. This is the only solution I have found to see the info. I believe they are using LR 4 and a MAC.
Is it possible that the problem is the original files are saved on a mac then transfered to my windows machine.
View 9 Replies
View Related
Dec 17, 2013
I have a trouble with metadata conflicts.
I'm not making any adjustment in Lr. I'm just opening, editing and saving a TIFF file in Ps and I'm always getting the following warning. What can cause a metadata conflict for such a case?
View 2 Replies
View Related
Jun 19, 2013
I installed Lightroom 4.4 recently. I have been using 2.x for years.
I exported a number of jpg files into a JPG subfolder. These jpgs were generated from cr2 files. The "add to catalog" option was selected. My problem is that not only the exported files/pictures were not added to the catalog but that I cannot add them manually (by syncing the upper-level folder).
View 5 Replies
View Related
Jun 9, 2012
I am using LR 4.1, and PS6 with ACR 7.1, although I have this same issue PS 5.1 and ACR 6.7. I select "edit in Photoshop", and when finished save as a tiff (same problem with PSD) in the same folder where the raw file (in my case CR2) is. The saved tiff looks far different from the way it looked in PS. Typically it is much lighter. In fact, I can select "edit in Photoshop", do nothing in PS, save as a tiff the same thing occurs. If I save the tiff to another folder, there is no change. So, it appears LR is modifying the tiff image in some way when saving. This is with Windows 7 and ProPhoto RGB in both LR and PS.
View 5 Replies
View Related
Oct 14, 2012
I'm running Snow Loepard 10.6.8. I upgraded from LR 1.7 to LR 4.2 today, and chose to upgrade the catalog as part of that. This all went fine - no errors.
I can see all my old photos in Library mode, and when I click on any of them - I can do Quick Edits (or anything else allowed) in Library mode; however, LR 4.2 isn't leting me open the selected pic in Developer mode
View 1 Replies
View Related
Aug 25, 2013
After converting a photo in NIK it comes back into LR asa tif is there a way to convert to jpg besides exporting?
View 4 Replies
View Related
Jul 5, 2004
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
View 5 Replies
View Related
Aug 18, 2008
if there's a way for my PSD file, which I created and saved in Elements, to be opened in CS2?
View 2 Replies
View Related
Dec 31, 2007
i've just been using the brush tool to draw and paint around with, and today when I tried to open up a saved project from last night, It came up all blurry and very undetailed compared to when i saved it. I think it might be the saved file was 16 bit, and maybe it's opening it up in 8 bit which is making it blurry? Or maybe my computer can't handle the 16bit and my resolution on the saved file was too high?
Also, I was wondering some recommended starting specs (like when I open a new window)
View 1 Replies
View Related
Dec 3, 2012
I've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies
View Related
Feb 15, 2012
Using Adobe Photoshop CS2. I'm noticing a color difference between an image I'm working on in PS and the final image - after it has been saved.
For example: working on a image of earth. The image on the web has very deep blues. but when I open it into PS, it looks very purple-ish and when I save it, the color is blue again.
Sometime the difference is slight, and other times it is definitely noticeable. Is there a setting I could adjust? One that would keep the image's true color?
View 4 Replies
View Related
Jun 4, 2013
I have a client who insists on receiving final files as PDFs saved as Illustrator Default with Preserve Illustrator Editing Capabilities ticked. This wasn't an issue until I upgraded to cs6. In cs6 I'm saving the native file as cs5, and then saving as PDF with the following options:
The client is able to open the PDF in cs5 but the layers are all flattened into a single layer. Is there way to Preserve Illustrator Editing Capabilities for any version other than cs6?
View 1 Replies
View Related
Jun 23, 2012
I have created a saved book in LR4. I saved it not because I had finished but because I wanted to protect my work to date. Now I cannot add new images, although I can work with (move and remove) the existing images in the book.
View 1 Replies
View Related
Jan 22, 2014
Just upgraded from LR4 to LR5.3.Just got new laptop (Windows 8.1 64-bit OS)TIFF images exported from LR5 are causing (many) warnings when stitching panoramas using Hugin.Hugin works fine (no warnings) with TIFF images exported from LR4 on prior laptop (Win Vista)Hugin warning message: TIFFReadDirectory Warning: unknown field with tag 59932 (0xea1c) encountered.Images are being exported from Nikon D800 NEF RAW filesPanorama stitching still works, but I am getting about 50-100 warning dialog boxes.
Is there a LR5 setting which allows me to prevent LR5 from including tag 59932 in TIFF images?
-or-
Is this a known issue with a fix in the works?
View 13 Replies
View Related
Apr 22, 2013
I plugged canon 1D mark IV with LR 4.3 for tether shooting. it works great. However, I realized that there is no image save on my CF card. All images were transferred to the computer via tethering. I really want to keep a copy of the card for logistics reason. I couldn't find any setting on LR preference regarding this.
View 8 Replies
View Related
Feb 26, 2014
I created a book in Lightroom using images in a Collection totalling 105 images. I saved a layout containing 26 images. Now I'd like to add more images to the saved layout.
View 1 Replies
View Related
Nov 13, 2013
I prepared a rough draft of a book and saved it with the tab on the right hand top of the main screen. Unfortunately, I saved it with the option of only saving the used images from the original collection. Later I brought up the draft book and tried to add some additional images, but see that only the images already used in the book are available on the image strip at the bottom. I need to get other images which are in the original collection. Is there any way to do this? If not, is there a way to save the entire format of the book and then start over with the same format but with the original full collection as the source of images in the bottom strip?
View 2 Replies
View Related
Mar 31, 2012
I started a book the other day, knowing that it was going to be an ongoing project. When I was done working on it, I created the saved book and named it. I have no problems openning up the book from the collections. My issue is now that I saved it, it only shows the images that I used for the book in the film strip.
When I select "ALL PHOTOGRAPHS" in the filmstrip window (while still in my previously saved book), it opens a new unsaved book.
How do I keep my saved book open and get the rest of the images in my library in the filmstrip?
View 2 Replies
View Related
Nov 19, 2013
I have made a book within Lightroom 5 and saved it. Now gone back into it days later after needing to make an error change and now decided I want to add more images to it but from a different images folder but its not allowing me. I have tried dropping and dragging from the folder in library to the folder named within books but it just shows a circle symbol and doesn't work. I have tried to add through file and import but doesn't work, it just adds new pictures to my library but not to the book of images. I have tried adding through adding new category but same.
View 1 Replies
View Related
Jul 8, 2013
I saved a file as a .tif and it saved as normal then I shut down Photoshop and then the PC. The next day when I try to open the file it doesn't open correctly it opens but the right hand side of the photo is on the left and the left hand side of the image is now on the right, its like its been cut in half and put back the wrong way.
It also didn't open with the layers only as a locked background. When I view the file in the icon it looks fine until I open it.
View 3 Replies
View Related
Aug 12, 2013
CS6: why does a TIF image saved to Jpg format becomes so small?
tif = 292700 kB becomes Jpg = 936 kBJpg options: large file Quality 12, format option: Baseline standard.
View 10 Replies
View Related
Jan 21, 2013
why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies
View Related
Dec 3, 2013
I am using Lightroom 5.2 and only gray squares appear in the Library mode. How can I get my images to appear ? A couple of additional details are:
I have my images stored on external portable HD drives.
I have been successful using this set-up on a previous installlation of Lightroom 5.0.
View 1 Replies
View Related
Apr 22, 2012
When I used LR3.6 The Library option listed all my files on the left hand side under 'Folder' and showed a sub-folder for each year 2009-2012. I have now upgraded to LR4, and all I can see is 2011. During the install process of LR$ it asked me if I wanted to upgrade the process model, which I said yes and it did. Then, because I had read that 4.1 fixed a lot of issues, I downloaded and installed RC4.1 which I am running now.
How do I make LR4 show me all my Folders? I don't think I should be re-importing them all.
View 2 Replies
View Related
Jul 20, 2013
I have a folder with no images in it that were there. I right click and synchronize the folder and grayed out images appear. Mousing over an image produces a message that says this image is alread in library. How do I recover to see images?
View 9 Replies
View Related
Jun 9, 2012
I am trying to open Lightroom 4 from my desktop and it keeps giving me this message:The Lightroom catalog named "Lightroom 4 Catalog" cannot be opened because another application already has it opened.
View 1 Replies
View Related
Feb 21, 2012
Just noticed that all photos that I had imported since last July have disappeared from the library. I've checked that I'm not using the backup library. I'm not sure what is the cause or even really if it just happened. I've imported photos last week, and those are present. But those added between end of July and end of December (the last import before the one last week) are gone. The files itself are still present, but they are not part of the library anymore. Though, I'm happy the originals are intact, I'm frustrated at the thought of redoing all the keywords, ratings and develop settings.
My setup: mbp with 2 drives (one contains all applications, the other has lightroom library). The raw files are on an external drive. Until today I've been using version 3.5. I upgraded to 3.6, hoping that maybe this will fix this, but no luck.
How I can restore references to the images in my library?
View 4 Replies
View Related
Aug 25, 2012
For no reason I can think of, sometimes the photo I see is different from the one that should be there. The correct one shows up in Develop, but I don't understand why Library shows a different one. Sometimes all the images in a folder get shifted over by one, or sometimes one is a duplicate view of another. And then for no reason it seems to resolve. But meanwhile I'm afraid to export the catalog to copy on another computer for fear that I'm exporting incorrect data.
View 5 Replies
View Related
Nov 16, 2012
I have Just upgraded my LR3 catalogs to LR4. I am able to view my images in Library mode but when I switch to Develop it says no photo selected and there are no images in my film strip. What is going on ?
View 2 Replies
View Related
Nov 26, 2011
I am ruhnning Windows &7 Pro, 64 bit and I'm experiencing inconsistent behavior in Lightroom 3.5 with regard to moving images within collections. When I try to move an image, to place it in the order in which I would like view the sequence, the image is placed at the end of the sequence no matter where I place it initially. I've tried the filmstrip view and the grid view and it happens in both. I recall doing this without problems previously however it was in the imported Library not a collection, but why would this be different?? One still needs to reorder images in collections. I've made certian to change the "sort" option to user each time I've tried to do this.
View 2 Replies
View Related
