I have Just upgraded my LR3 catalogs to LR4. I am able to view my images in Library mode but when I switch to Develop it says no photo selected and there are no images in my film strip. What is going on ?
View 2 RepliesI used to be able to highlight several images in the Library Grid mode, type in a Metadata Label, and that label would be applied to all of the images. Doesn't work any longer. What am I missing? Doesn't work for Keywords either.
View 2 Replies View RelatedI Just istalled Lightroom 4.2 and imges will not display in Library mode. this LR 4.2 was an upgrade for LR4.1 which worked perfectly before the upgrade. Now all I get in Libary mode is image data and a grey spot where the images should be.
View 1 Replies View RelatedOur problem with Lightroom is this: After inporting images, they do not show in the library mode. The tree view shows first image of the folder, but the library preview does not open.- Probllem is persistant and any new images after 3 weeks are not showing up.- problem is resistant, we upgraded from 5.0 to 5.3, but problem is consistant.
System specs: Generic computer, 8gb memory, windows 7 ultimate 64bits.c: (SSD) houses lightroom, windows & catalogue files.d: houses inport with Picasa files.p: Container of accepted and to be edited image f
General process of images: Import with picasa of images, verification of image quality and rejecting failures.After all images are done, use of syncredibles program to copy new files not yet on the picasa library folder. This basicly checks and moves pictures that are currently on drive D: but are not yet on drive P. After new files are transferred, then picasa will re-import with add function on import from its own folders.
Directory structure: c:program files adobelightroom 5.3 (main proigram)c:uusi kansiolightroom caltalogued:kuvat (picasa image store)
p:kuvat (lightroom image store)
The divasion of d: and P: driwe is so that picasa will not see images that arte on Lightroom and vice versa.are on D: & P started to get "read obn
We have tried to study this problem, and first we notised that folders that houses images on both driwes, started to receve "read only" atrribute. Even tho we cleared this with user restrictions (folder security) the imported images still refuse to load the previews.Catalogue contains over 30 000 raw images.
We are starting to shoot blanks here. In short, the tree view shows first image of the folder, images are present in the system, but when you click the tree view to open up the folder, no images will refresh to center view of the screen. If pressed couple of times screen will go white, and crash LR.We have tried to "find missing files" and "folder synchronication.
I've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies View RelatedI have done but I am using lightroom 1.4. Previously, any pictures I edited would show as an edited file in the library now all that happens is the original image shows as the edited image.
View 2 Replies View RelatedI've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies View RelatedThis may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders
How do I sort my folders in the Library mode -- on the left "folders panel" -- by default it sorts alphabetically -- how do I change that default?
View 3 Replies View RelatedOne is as follows: I start in library mode/grid. I have a publish service that exports to hard drive, with some folders configured. I click on any folder, I see the correct pictures. Clicking on any folder inside the service lets me see the right pictures. Now I click on any other folder outside of the publish service (say, a collection, a smart collection, a folder... whatever) and... neither the thumbnails in the grid nor the filmstrip at the bottom are updated; the only part of the screen which is updated is the filmstrip description (i.e. I read Collection: blahblah, 123 photos).
View 2 Replies View RelatedI Just istalled Lightroom 4.2 and imges will not display in Library mode. this LR 4.2 was an upgrade for LR4.1 which worked perfectly before the upgrade. Now all I get in Libary mode is image data and a grey spot where the images should be.
View 2 Replies View RelatedI truly love to work with lighroom. However, I hope that in the next adbobe update , that a more advanced but fundamental search/sort feature is added to the library mode.
Specifically - in Library mode --under folders -- there is no way to sort the folders other than alphabetically. Why not -- like most, even primitive photo editing software, can one not sort by date, time taken, place etcetc ... at least by date!!
I'm having a serious problem with the thumbnails in Library/Grid mode taking anywhere from 5-10 seconds to "pop in" the adjustments I've made in develop and/or via the quick develop tab. I need to quickly see if large batches of images are similar in color/exposure, and I've always used the Grid to compare them in bulk. Now it seems the previews refuse to update unless I hover over that image for an extended period of time. I've even tried jumping back and forth between Develop (in order to update the preview) and Library, but 8 times out of 10 it reverts to the old preview. I have tried:
1) Clearing my cache
2) Expanding the cache size from 3 GB to 10 GB to 40 GB with no avail
3) Optimizing the catalog
4) Updating Lightroom & Camera Raw
5) Removing Luminance/Sharpen adjustments from all the images
6) Reducing Preview size/quality
7) Using Smart Previews
Because of the sheer numbe of images I work with, I have to store them on an external drive, not my Mac (3.06 GHz Intel Core i3 and 16 GB DDR3 memory). Even when I edit images locally on the machine, I have this problem. All of my software and drives are up to date, and I've got around 90 GB free on my system. making my adjustments on faith and then "re-updating" the previews...but deleting the Smart Previews/Previews and recreating them doesn't seem to fix the problem.
Having a screen flicker problem since 5.cRC came out, but only in Library/Grid mode when scrolling or selecting from the grid. But only when there are more images than can fit on one page in the grid.Seems to use an unusually low amount of memory with nothing else running on the system.
View 6 Replies View RelatedI was editing phots when I suddenly realized that sharpening tool, neither the adjustment brush for sharpening or ordinary sharpening, would be shown in Library mode or when photos were exported. When I see the picture in Develop mode, they seem fine and I can adjust the sharpness as usual. So something goes wrong between Develop and Library mode.
I have Lightroom 4.4. The ISO level in the pictures are not high at all, so that is not the problem, as I have read some explanaitions of. When I see the picture in 1:1 in both modes, they look the same after sharpening. But if I zoom more, I can definately see big differences.
How do I change the size of my thumbnails when working in Library mode?
View 1 Replies View RelatedI just discovered, that when in Library module, and viewing my photos in Fill mode, it is not sharp. It is in fact so blurry, that it is unusable. Not sure I remember it correctly, but it happened also during the tethered shooting and viewing image on secondary monitor.
Interesting thing is, that once in a Develop module, Fill mode preview is sharp. I tried different settings re preview in Catalog Settings and Preferences, but no success.
why is there a change in aspect ratio in library and develop mode ? this happens only for this picture ...
library view :
develop view -
How do I reset it to get back to the original aspect ratio so that I can see it better and work on it.
I have been using LR 4 for a couple days now and when I went to the "Keyword List" I could access some of the keywords. When I got to "S's" I could not access them. One other thing I did, was to use the "Filter Keywords" and when I put the "S's" in, then I could. Seems maybe there is a limit to how many keywords can be listed?
View 3 Replies View RelatedI'm running Snow Loepard 10.6.8. I upgraded from LR 1.7 to LR 4.2 today, and chose to upgrade the catalog as part of that. This all went fine - no errors.
I can see all my old photos in Library mode, and when I click on any of them - I can do Quick Edits (or anything else allowed) in Library mode; however, LR 4.2 isn't leting me open the selected pic in Developer mode
When I double click on the video downloaded from NikonD7100 in Library mode in lightroom 5 it will not play. I have windows 8..
View 1 Replies View RelatedI use a file structure in lightroom with subfolders within folders to organize photos; some of these top level folders contain many thousands of pictures; I have found that any top level folder with greater than 3000 photos will no open, and therefore all photos within that top level folder are not searchable. When I try opening such a large folder, the phrase "no photos in selected folder" is displayed. This has never been happened in LR3, but is happening in LR4. Folders less than abour 2500 photos can be opened and searched easily.
View 2 Replies View RelatedWhy doesn't the slideshow start button in Library mode play the selected music?
View 1 Replies View RelatedI've just imported all my photo's into LR5 in order to categorise and delete where appropriate (In Library mode). Although JPG files are displayed where no RAW files exist, JPEG files are not displayed where corresponding RAW (CR2) files exist. I have checked the box in Preferences to treat JPEG files next to RAW files as seperate photos, but this seems to have no effect.
View 2 Replies View RelatedI am looking at my thumbnails in Library mode. How to I determine which was the last image I edited?
I edit my images in sequence. Often I need to leave a particular set of images to work soemwhere else in LR. On returning I need to easily see which was the last image I edited so I can continue in the sequence. At the moment I go into develop mode and check in the history. That though is a long way round.
My wife's library has over 30,000 photos in it. We've started developing a problem where the images in Library View are all the exact same photo, even though it's nowhere close to being the same image.
[URL]
you click on a date and the thumbnails load, but as you click on the image, it pauses and then shows you the real image in the Navigator (in this screencap, the image has not yet refreshed in the navigator).
i tried rendering previews, but it didn't fix the problem (after hours of the processing). I've rebuilt the catalog when moving to a larger harddrive, but I don't want to reimport everything to a new catalog because i don't want her to lose her edits to her photos. i'm not entirely certain if "Optimize Catalog" will fix the problem.
LR3.5 on Win7 Laptop with 8Gb of ram and a 2.5 i5 processor
I'm having trouble with the secondary display (window, in my case; only one monitor). When I first open the secondary display, either with a keyboard shortcut or by clicking, all is fabulous. The display modes (Grid, Loupe, Compare, Survey) are visible & clickable, as is thumbnail slider, file path. If I click or keyboard command to Loupe view, Normal, Live & Locked modes are available. However, if I close the window and then want to open it up later in my workflow, all of the aforementioned functions disappear. I'm able to bring up the Filter view, and can technically still work off the menu bar (and keyboard shortcuts, if remembered). But only if I restart the program do the full set of functions become visible again. The arrows at top & bottom don't collapse/expand to show anything more than a black border where the display & mode options once were.
View 1 Replies View RelatedIn the process of trying to find out how to name virtual copies I came across Julianne Kost's blog which explained it very well.
However, I can't find the rather useful option of showing "copy name or file name" but rather just "copy name" or "file name" on their own. Since I'm using LR3 (Mac), is this a feature available only in LR4 or am I doing something wrong?
I want to view folders in library to make sorting easier but my template of folders (created in Finder) will not show. Before I cull my images, I'd like to be able to sort/shove specific images into specific folders before culling. It appears that the only way to see these folders is to have an image in them.
How do I get these folders to appear in Library?
On LR 3.6 I cannot view my photos on the film strip in the LIBRARY setting. On DEVELOP I can view on photo at a time on the film strip (the rest of the photos are not viewable). This is a new problem which has only occured on the last two imports.
View 3 Replies View RelatedAfter renaming, I have to deselect and reselect images to have the filename update.
View 1 Replies View Related