I've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 RepliesI am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
When I open The Lightroom, I do see the Tabs such as: Library Develop and other Tabs on the Top of page.
When I click on Import and I choose a folder I do see all the pictures of that folder in the middle of the page,,But The Tabs such as Library ,Develop, and other Tabs disappear. I am watching a Video Tutorial and I think I am doing some thing wrong.
I've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
View 9 Replies View RelatedI have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
View 14 Replies View RelatedWhen I export JPEGs from Lightroom, they display fine on my computer but when I send them to the client, they are not displaying at all. There is a message saying that the software on the clients computer may not be up to date so I tried updating their software but to no avail.
View 4 Replies View RelatedI frequently export pictures from LR-5 to Phanfare. Up until today this process has gone smoothly. Now, suddenly, the file sizes are small, but with their develop adjustments applied. I use Chrome on an iMAC. Everything is up-to-date. It would appear that the exporter is dipping into the 1:1 previews. If so, how can it be rerouted to the proper source?
View 5 Replies View RelatedI've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies View RelatedI'm new to the photography world and having a bit of trouble when using Lightroom.I have a new Olympus PEN EPL-5 and Lightroom 4.3 running on Windows7.
When I import RAW (.ORF) files they are dark in general, but when export them as JPG they are brighter, similar to what native JPG from the camera looks like. Then if I "correct" the ORF file in Quick Develop or Develop it becomes too light/bright/over-exposed.
Here on the left is the RAW file import with Develop Settings = "none" and to the right is an export to JPG color space "sRGB".Now if I adjust the RAW (.ORF) file in LR I can get it close to the JPG on the right above, but then when I export it, it becomes way too bright
why the RAW Library image is so far off from the exported JPG image?Obviously this "issue" makes using Lightroom very difficult as I can't tell how changes in LR will really turn out once exported.
I have Just upgraded my LR3 catalogs to LR4. I am able to view my images in Library mode but when I switch to Develop it says no photo selected and there are no images in my film strip. What is going on ?
View 2 Replies View RelatedFor some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedI have done but I am using lightroom 1.4. Previously, any pictures I edited would show as an edited file in the library now all that happens is the original image shows as the edited image.
View 2 Replies View RelatedI can't reproduce this consistently; but I've had this happen many times now.
Product - Lightroom 5 on OS/X 10.8.4.
I select two images in the develop module filmstrip to pick the best one for export, the images are usually stacked in the Library.I use the side by side compare tool (C) to compare the images.I may go back to the develop module to adjust setting on one or both images.
At some point I will unselect the image I don't want to export in the filmstrip, then press Command + Shift + E to export.
LR will sometimes export both images even though only one is selected in the filmstrip.
If I go back to the Library before exporting then LR will only export the selected image.
Using 2008LT/2012LT...I am working on a job that is being done in phases. I want to show one phase as per pen assignments and other phases in a grayscale. Is there a way to do this when plotting or do I have to change the viewport display individually for the grayscale vps?
View 3 Replies View RelatedMy rig includes Windows 7, Asus P8Z68 Deluxe Gen 3 with i7 2600K, 16GB DDR3 mem, SSD drives, fast Radeon video card.
I'm using Lightroom 4, just upgraded, have this problem: when I export to Folder1> Subfolder 1, it puts the export images in the next up hierarchical folder, i.e. Folder1. I select the folder I want in the Export dialog, and I don't have any subfolders selected or created, but it always sticks the shots in the next folder up the tree, it's happened every time I've exported.
Photoshop displaying image differently on a same screen in different placement. Same image when moved a bit to the left changes image saturation. This is happening only in photoshoop CS6. I have two older versions of photoshoot that are working just fine. No other program is shoving behiever like this. I tried different files jpg .psd .png, same behavior.
Photoshop CS6, MacPro OS X v 10.8.4
Somehow my dockers started displaying in two columns side-by-side, where they used to be all on top of one another. Nothing I've tried has resulted in my getting it back the old way.
View 7 Replies View RelatedDisplaying the Library on a second monitor?
View 10 Replies View RelatedWhen i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 Replies View RelatedSome entries say that previews in the develop module are more accurate than the library module.If we have sRGB or Adobe RGB monitor, is it possible to have different views in these two modules?
View 1 Replies View RelatedI finished editing 1500 photos in Lightroom 4 on a calibrated monitor, running 32Gigs of RAM (still sluggish). I noticed that the Library module was noticeably different from what I saw in the Develop module. It looked like none of the noise reduction I applied had made it to the Library preview. I tried rebuilding the standard previews and it did not work. I zoomed in 1:1 preview and when I zoomed out the preview was correct. I have to click on 1500 photos to view them correctly?
View 1 Replies View RelatedWhen I switch to develop from library the photo won't open. It worked when Installed the program and now it won't
View 19 Replies View RelatedI am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
intel 2600k @4.3 GHZ with 32 GB RAM and a 250 GB ssd here.... still LR behaves sluggish when switching modules.
ok only at the first time when i switch between modules.but why is the library module not loaded in the background to avoid this?
We have standard port details in JPG format that we frequently embed into a drawing via Manage -> Insert Object -> Create From File.
We've discovered that the JPG image does not display in Inventor View (which our co-workers use to view/print drawings).
For example, I often export a folder of full-res images, and then go back and do the same images as lo-res with watermarks, that I export to an "email" folder inside the hi-res folder. That way, I email the little ones for clients to peruse, and then send the full-res after they agree to buy. I know I can set up two presets and do them separately, but thought I'd ask.
View 7 Replies View Relatedhow it deals with cropped images. I have the following edited image, cropped to some specific region:
Then, I tell lightroom to edit this image in Photoshop CS4:
However, once it hits photoshop, it has magically gained more image data than I told Lightroom there should be:
Somehow, all the development settings are correct, but the crop has too much data.
I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?
View 1 Replies View RelatedI was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
Why this wasn't changed?
When I open the photos in "Library" do not look good. In "Develop" yes... When I go Library to Develop, the screen moves a bit, and then it looks good but does not work because when I export, the photos look, like in Library. I'm climbing the walls from last night (I uninstalled, updated, etc) Now is Lightroom 5.
View 6 Replies View RelatedI'm a light room noobie (as in I downloaded it 2 days ago). I'm loving the experience so far, however, I have a quick question, I have edited a few photos I took at a gig, I've developed them, however, when I look at them in Library, there is a loss of sharpness in some, in others where I've reduced noise in Develop, there is still noise when viewed in Library.
View 8 Replies View Related