Somehow my dockers started displaying in two columns side-by-side, where they used to be all on top of one another. Nothing I've tried has resulted in my getting it back the old way.
View 7 RepliesHow to use Lens Dockers in CDR X5.
View 4 Replies View RelatedI have read several post regarding dockers not locking in a 2nd monitor, and none of the answers have solved my problem. I have two monitors. My monitor on my left is a big 27" monitor and I use it as my drawing monitor. The second monitor is smaller and set to portrait on my right, and is used for my dockers. Every time I open CorelDraw I have to drag my dockers to my 2nd screen.... I have tried resetting to factory settings, I have tried saving my work space as default. Nothing is working.
View 4 Replies View RelatedMy dockers have become messed-up. Some are no longer visible etc.
How do I reset the Dockers to default without resetting the whole workspace (X5 version 15.2.0.686)?
I was experimenting a little bit with the dockers at the right side of the workspace of Corel Draw X5 and now for some reason when I go to "Window" and select a new docker to open, the new docker appears not nested with the rest as it did before, but as new floating window so I have to add it to the rest as a tab manually which is not handy. Up to now each new docker would appear already nested. This is annoying because I really liked the way the dockers appear nested in tabs in X5.
How I can make the dockers appear again tabbed once I open them?
I am having trouble with some of the dockers. Some of them when i go to window dockers and click on them come up just fine, but there are a few and don't come up at all. Like Contour or Text Properties.
View 3 Replies View RelatedI have been using coreldraw 12 for some time and all of a sudden the transformation docker, I usually get it to pop up with the alt F7 shortcut, does not come up. None of the ones listed under arrange, transformations will work. Have I accidently turned something off or what. I have uninstalled and reinstalled and it is the same. I am running windows 7
View 8 Replies View RelatedI see many people doing realistic mockups for print materials, and have seen some Photoshop templates for doing this. Here is an example of mock up
[URL]......
I'm working with CorelDRAW 12 and am having trouble with a frustrating issue. If I create a logo from my work computer, using pantone colours and everything, the colours are really rich and vibrant. When I open that very same file in Corel at my house computer, however, all the colours display in a pastel, watered down way.
My home monitor is much better than my work one, and if I export the file from work into a .png it still displays as it should, rich and vibrant, when I open that on my home computer. However, if I leave the pantone colours as they are but export it from my house... it then keeps it as the pastel, watered down version on every single monitor. How do I fix this? Is this a monitor issue or a CorelDRAW problem - have I somehow not set up my Corel the same at home?
I have installed Corel Draw X5 on a machine running XP Home (SP3) that more than matches the minimum specs required.
Have been a user of Corel Draw since version 7,8, 9 and 12.
When I type text using any True Type Arabic fonts in Corel Draw X5 the text just appears as blank squares. If I apply an outline to the text then it appears fine but if I then try to edit the text it goes back to appearing as blank squares. (Square are not filled, just outlines). This happens when typing text as artistic text or paragraph text.
It is the same in the drop down list for selecting a font when previewing a font it just appears as blank squares.
I do not have this problem with Corel Draw 7,8 or 9. All my Arabic fonts appear fine in these earlier versions of Corel Draw and in other software. This problem first arose with Corel Draw 12 but I learn to live with it but am very disappointed it is still happening in X5.
On another note X5 appears to be not fit for purpose due to the number of problems I am and other users are having with it.
CorelDraw 12 & Windows XP.
Type 1 fonts not displaying. Open Type & True Type OK. Type 1 OK in all other programs. Problem just happened a day or so ago.
We are using CorelDRAW 15.2.686.0 on our fleet and are noticing that Object Manager has some weird behaviour when you add objects to a page after you copy/paste an object onto a page.
Below shows me adding some rectangles to a page and object manager showing them:
Then when I copy paste an image into the document this object and any subsequent objects are not shown in the Object Manager:
As you see I have more objects than are shown in the Object Manager!
If I go to the Window Menu, then Dockers, then untick the Object Manager box, then once again go back and tick it, then all the objects on my page now show in Object Manager!
There were some patches available at one time but I'm not able to find them anymore. I have recently installed X3 on a W7 machine and have so far found everything to work fine except for an issue of half of my fonts being blank when trying to choose one from the drop down menu. Existing files with these blank fonts also come up with the fonts completely missing as if the entire set of words was deleted. Here is the list of patches that I've heard is necessary for X3 to be compatible with W7...
Below is a message from an older post:
I too have CorelDraw X3 on a Windows 7 machine, in order to get the best from it you will need to visit Corel's website [URL] and install the following patches Service Packs and patches in this order, re-start after each:1. CGSX3 Hot Patch1.exe2. CGSX3SP1.msp3. CGSX3SP2.msp4. Font Nav Fix.msp .. which will fix the problem with the Fontsand then run the program in Compatibility Mode with Windows XP+SP2
I used to have X4 installed on XP and it worked fine. Recently I re-install the program onto my new Win7 PC. It was working fine at first but one day my CMYK palette turn into some weird colors (much brighter than the original one)
I tried to hold F8 to launch X4 to turn it back to dafault settings but no go. I tried uninstall and reinstall and it's the same. Finally I downloaded the latest X5 Free trial and the color palettes are displaying correctly! (So i figure it's not my monitor's problem nor some Windows setting.)
(X5 Displaying the correct CMYK color palette)(Ised X4 for a few days and the colors became much brighter than the original ones.)
Just installed X6 and tried CONNECT for the first time and it doesn't display the thumbnails of the vector images only bitmaps etc.. Any way to correct that?
View 7 Replies View RelatedI just got myself a new laptop with windows 7 on it. When I open a file that is missing fonts on my system the Font Substitution for Missing Fonts does not display on opening that file. Corel doesn't replace the missing font with an other font text it just shows up on my screen as a blank page. I need to know what fonts I'm missing in my system so that I can install them and continue working on my projects.
View 10 Replies View RelatedI got calls from 3 of the DRAW users that some of the fonts are not displaying correctly since they have updated their Windows today. I have not yet connected my laptop to internet. Shall check it and try to identify the culprit update.Few fonts known for not displaying correctly since today.
View 24 Replies View RelatedUsing 2008LT/2012LT...I am working on a job that is being done in phases. I want to show one phase as per pen assignments and other phases in a grayscale. Is there a way to do this when plotting or do I have to change the viewport display individually for the grayscale vps?
View 3 Replies View RelatedPhotoshop displaying image differently on a same screen in different placement. Same image when moved a bit to the left changes image saturation. This is happening only in photoshoop CS6. I have two older versions of photoshoot that are working just fine. No other program is shoving behiever like this. I tried different files jpg .psd .png, same behavior.
Photoshop CS6, MacPro OS X v 10.8.4
I have a base drawing with all my pipe networks data referenced in. When I xref this drawing into out drawings some of the pipe styles and structure styles are displaying differently than in the base file. Both drawings have same parts lists and styles.
View 8 Replies View RelatedI've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies View RelatedI am trying to check and un-check options for Transparent Interface, but only menus and color palette became transparent. Dockers are staying opaque.
Is it me, my computer, or a bug?
CorelDRAW X6, updated, HF1
Win7, 32bit
CorelDRAW X6
I covered how to transform a image in a variety of ways using different tools and effects and dockers.I felt that I should share some of her talent with her permission.
View 14 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.