CorelDRAW Graphics Suite X6 :: Dockers In 2nd Monitor Not Locking?
Sep 11, 2013
I have read several post regarding dockers not locking in a 2nd monitor, and none of the answers have solved my problem. I have two monitors. My monitor on my left is a big 27" monitor and I use it as my drawing monitor. The second monitor is smaller and set to portrait on my right, and is used for my dockers. Every time I open CorelDraw I have to drag my dockers to my 2nd screen.... I have tried resetting to factory settings, I have tried saving my work space as default. Nothing is working.
View 4 Replies
ADVERTISEMENT
Sep 18, 2012
How to use Lens Dockers in CDR X5.
View 4 Replies
View Related
May 28, 2013
Somehow my dockers started displaying in two columns side-by-side, where they used to be all on top of one another. Nothing I've tried has resulted in my getting it back the old way.
View 7 Replies
View Related
Aug 16, 2012
My dockers have become messed-up. Some are no longer visible etc.
How do I reset the Dockers to default without resetting the whole workspace (X5 version 15.2.0.686)?
View 3 Replies
View Related
May 30, 2011
I was experimenting a little bit with the dockers at the right side of the workspace of Corel Draw X5 and now for some reason when I go to "Window" and select a new docker to open, the new docker appears not nested with the rest as it did before, but as new floating window so I have to add it to the rest as a tab manually which is not handy. Up to now each new docker would appear already nested. This is annoying because I really liked the way the dockers appear nested in tabs in X5.
How I can make the dockers appear again tabbed once I open them?
View 3 Replies
View Related
May 7, 2012
I am having trouble with some of the dockers. Some of them when i go to window dockers and click on them come up just fine, but there are a few and don't come up at all. Like Contour or Text Properties.
View 3 Replies
View Related
Jan 17, 2011
I have been using coreldraw 12 for some time and all of a sudden the transformation docker, I usually get it to pop up with the alt F7 shortcut, does not come up. None of the ones listed under arrange, transformations will work. Have I accidently turned something off or what. I have uninstalled and reinstalled and it is the same. I am running windows 7
View 8 Replies
View Related
Aug 4, 2011
Is it possible to lock text when it is on a path? I'm fine with locking both the text and the path, but it seems it isn't possible. Not to lock just the text or both the text and path. The option is greyed out. What purpose would not being able to lock an object serve?
View 3 Replies
View Related
Jul 3, 2012
I have Corel X5. I am designing graphics for sublimation printing. some of the graphics as seen in the program are not printing the same is what I see on screen. For instance I did a power clip process and it looks great on screen but the print preview does not reflect the graphic as seen in the program. The power clip is no longer clipped to the design. In another instance I used a fountain fill on design, the design looks great on screen and in the print preview but when printed doesn't look at all like what I designed on screen.
Most of my graphics are printing fine, its just when I have applied some special techniques that I am having problems. Is due to layers possibly?....
View 13 Replies
View Related
Dec 15, 2012
How to adjust the color display on the monitor screen between photoshop and coreldraw to display the same color display
View 14 Replies
View Related
Jun 22, 2012
Is it possible to lock the CFX output to the broadcast monitor so that I can see the changes I make on the image in the broadcast monitor while working in the 1-up view? This way the CFX schematic can fill my 23 inch computer screen. So far i have only been able to do that with the 2-up, etc views. As soon as I switch to the 1-up view or swipe to the left while in 2-up view (which switches it back to the 1-up) the broadcast monitor shows whatever I am working on be it schematic or other.
When I am in the 2-up view and I lock the right part of the 2 up view to the broadcast monitor I usually maximize the left view to fill the screen. It however does not fully fill the screen and keeps the right view scaled to a very small size on the right.
View 2 Replies
View Related
Jun 28, 2013
I am trying to check and un-check options for Transparent Interface, but only menus and color palette became transparent. Dockers are staying opaque.
Is it me, my computer, or a bug?
CorelDRAW X6, updated, HF1
Win7, 32bit
CorelDRAW X6
View 6 Replies
View Related
Apr 27, 2011
I covered how to transform a image in a variety of ways using different tools and effects and dockers.I felt that I should share some of her talent with her permission.
View 14 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
Jul 21, 2013
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
View 4 Replies
View Related
Nov 9, 2011
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
View 4 Replies
View Related
Jul 23, 2011
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
View 4 Replies
View Related
Mar 14, 2011
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Jun 19, 2013
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
View 4 Replies
View Related
Oct 18, 2012
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
View 3 Replies
View Related
Jan 2, 2013
02012013010.jpg
Blank Blocks behind text and graphics
View 4 Replies
View Related
Dec 6, 2013
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
View 9 Replies
View Related
May 22, 2011
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Nov 6, 2013
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
View 7 Replies
View Related
Jun 13, 2011
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies
View Related
May 10, 2012
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies
View Related
