When I open The Lightroom, I do see the Tabs such as: Library Develop and other Tabs on the Top of page.
When I click on Import and I choose a folder I do see all the pictures of that folder in the middle of the page,,But The Tabs such as Library ,Develop, and other Tabs disappear. I am watching a Video Tutorial and I think I am doing some thing wrong.
In Lightroom 5 and 5.2, when using the X key, then Delete Rejected Photos, the central display box no longer displays an image. If I switch back to Library mode an image will appear but if I go back to the Develop module, again it's a blank screen! If not, how do I report this directly to Adobe?
View 12 Replies View RelatedI am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
I've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
View 9 Replies View RelatedI've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies View RelatedI have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
View 14 Replies View RelatedFor some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedI'm finding that my presets are disappearing a few minutes after launching the program. I checked and have installed my presets in the proper folder where it would look for them. I see them when I grab the handle on the left and everything drags up or down. But I begin to two finger drag up and down, the handle on the left stays put and the presets drag up out of sight and a large, blank gap appears below. I've also had it where the presets have disappeared and have had to relaunch LR5 to get them back.
View 4 Replies View RelatedThe keywording & Keyword List tabs are not showing up in my library module on the right hand side. Also, I can't seem to use the Mac 'Command + K' shortcut to add a keyword. Have tried on photos that are both from my iphone (TIFF) as well as raw from my Nikon (NEF).
View 2 Replies View RelatedWhen i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 Replies View RelatedSome entries say that previews in the develop module are more accurate than the library module.If we have sRGB or Adobe RGB monitor, is it possible to have different views in these two modules?
View 1 Replies View RelatedI finished editing 1500 photos in Lightroom 4 on a calibrated monitor, running 32Gigs of RAM (still sluggish). I noticed that the Library module was noticeably different from what I saw in the Develop module. It looked like none of the noise reduction I applied had made it to the Library preview. I tried rebuilding the standard previews and it did not work. I zoomed in 1:1 preview and when I zoomed out the preview was correct. I have to click on 1500 photos to view them correctly?
View 1 Replies View RelatedWhen I switch to develop from library the photo won't open. It worked when Installed the program and now it won't
View 19 Replies View RelatedI am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
intel 2600k @4.3 GHZ with 32 GB RAM and a 250 GB ssd here.... still LR behaves sluggish when switching modules.
ok only at the first time when i switch between modules.but why is the library module not loaded in the background to avoid this?
I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?
View 1 Replies View RelatedI was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
Why this wasn't changed?
When I open the photos in "Library" do not look good. In "Develop" yes... When I go Library to Develop, the screen moves a bit, and then it looks good but does not work because when I export, the photos look, like in Library. I'm climbing the walls from last night (I uninstalled, updated, etc) Now is Lightroom 5.
View 6 Replies View RelatedI'm a light room noobie (as in I downloaded it 2 days ago). I'm loving the experience so far, however, I have a quick question, I have edited a few photos I took at a gig, I've developed them, however, when I look at them in Library, there is a loss of sharpness in some, in others where I've reduced noise in Develop, there is still noise when viewed in Library.
View 8 Replies View RelatedUsing Lightroom 4.1 final, I see greatly different color saturation between the Library (very saturated) and the Develop (seems OK) module if I start the program on my sRGB monitor and drag the window to the wide gamut screen.
It seems like the Library preview is rendered as if the monitor was sRGB.
This seems very similar to the problem that was fixed from 4.1 RC2 to 4.1 final, but more specific to particular circumstances. And the problem does not exist if LR starts on the wide gamut monitor.
I'm using LR 4.1 final 64 bit on Windows 7 64 bit and I always use LR with a single window despite having two monitors.
For some reason I'm getting color shift between the Library and Develop Modules.
View 7 Replies View RelatedThe image does not come up when i switch from the library to develop module.
View 1 Replies View RelatedThe curved, block like, lines in the upper left of this photo appears in the Library module and after I export. When I am in the Develop module, the lines are not there. What is causing these lines, and how can I make it stop.
View 3 Replies View RelatedI've been using my LR3 for a few months but this is the first time that I got an error message when I was switching from the Library module to the the Develop module. I have a macbook pro with 500 GB HD. I am currently using 450 GB already.
View 1 Replies View Relatedfilmstrip appears on bottom but the compare option, before and after and slide to enlarge grid view are all missing.
View 6 Replies View Relatedwhy is there a change in aspect ratio in library and develop mode ? this happens only for this picture ...
library view :
develop view -
How do I reset it to get back to the original aspect ratio so that I can see it better and work on it.
I've noticed in the past couple of days that I will be refining an image in the develop module, feel I've gotten it the way I want it to look, and then switch back to the library module to export. When I do so, I notice the colors are quite different than they were just a second ago in the develop module. When I switch back to the develop module, it goes back to the way it looked in the develop module. How might I fix this?
View 4 Replies View RelatedI must have done this when I was trying to do some other keyboard shortcut and got the wrong one - and now I can't figure out how to get rid of it. But a few weeks ago, I did something and now the file name, date/time and image size appear in white text over the top-left of any photo I have in the Develop or Library screens:
So you can see "_MG_0955.CR2" and the other details in the clouds there. How to get rid of that? I can't find anything in any of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.
Is there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies View RelatedI have LR4 and LR5.
1.How do I transfer the Library (collections, folder, etc.) from LR4 to LR5?
2.Once that is done, how do I import into LR5, the keywords and descriptions as well?
3.Can I also import my LR4 presets to LR5 as well?
How can I import JPEG files with dashes in the file names into the library? In batch from a folder?
View 5 Replies View Related
