Lightroom :: Different Color Saturation Between Library And Develop Module
Jun 18, 2012
Using Lightroom 4.1 final, I see greatly different color saturation between the Library (very saturated) and the Develop (seems OK) module if I start the program on my sRGB monitor and drag the window to the wide gamut screen.
It seems like the Library preview is rendered as if the monitor was sRGB.
This seems very similar to the problem that was fixed from 4.1 RC2 to 4.1 final, but more specific to particular circumstances. And the problem does not exist if LR starts on the wide gamut monitor.
I'm using LR 4.1 final 64 bit on Windows 7 64 bit and I always use LR with a single window despite having two monitors.
View 2 Replies
ADVERTISEMENT
Nov 28, 2013
For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies
View Related
Feb 7, 2014
Sharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
View 18 Replies
View Related
Sep 14, 2012
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies
View Related
Aug 14, 2012
When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 Replies
View Related
Apr 21, 2013
I am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
View 4 Replies
View Related
Jan 25, 2012
I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?
View 1 Replies
View Related
Jan 12, 2012
I was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
Why this wasn't changed?
View 1 Replies
View Related
Mar 2, 2012
I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
View 1 Replies
View Related
May 21, 2013
The image does not come up when i switch from the library to develop module.
View 1 Replies
View Related
Apr 7, 2014
The curved, block like, lines in the upper left of this photo appears in the Library module and after I export. When I am in the Develop module, the lines are not there. What is causing these lines, and how can I make it stop.
View 3 Replies
View Related
Oct 28, 2012
I've been using my LR3 for a few months but this is the first time that I got an error message when I was switching from the Library module to the the Develop module. I have a macbook pro with 500 GB HD. I am currently using 450 GB already.
View 1 Replies
View Related
Oct 28, 2013
I've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
View 9 Replies
View Related
Dec 14, 2012
Is there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies
View Related
May 27, 2013
I have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
View 14 Replies
View Related
Nov 7, 2013
As you can see here, my sliders (the ones on the left) have lost their color & shadows!
Mine used to look like the ones on the right, then at some point they got to be a little desaturated... then a little while later they came to be what is on the left!
I'm would guess it's just some unfortunate hotkey I accidentally used (multiple times), but I've been unable to find anything about it...
I've tried resetting all the preferences in Lightroom, deleting plist files from the Library folder & even contacted adobe support though chat, but all to no avail.
View 1 Replies
View Related
May 23, 2012
LR 4.1 RC2, OSX 10.6.8 - when I'm trying to use the develop module with my second monitor, the image initially looks accurate. After a second or two and before any edits have been applied, the images desaturate and look very flat. Images viewed with the second monitor in Library module look great.
View 1 Replies
View Related
Jun 13, 2013
Preforming basic color correction in the develop module. Often I see an image is just a little Cyan or Red, how do you correct. The only controls are blue/yellow or magenta/green.
View 8 Replies
View Related
Jul 18, 2010
Today is the first day with Lightroom 3, where I have over 200 photos from an event, that I am walking through each photo. I am in the develop module and I am setting the color label to red or blue. What seems to be constantly (not every time) happening is when I click the color for the label, LR will move to the next photo, but not apply the color label.
As I write this I'm trying it out to notice a pattern. What I see is photo 1, I click on the red label and the photo is labeled red and LR moves to photo 2. I click on the red label and LR does not set any color label and moves to photo 3.
Another thing that happened is I was then at photo 3 and clicked on the blue label. LR did not set the blue label but jumped to photo 4 and put the blue label on that photo
View 4 Replies
View Related
Aug 24, 2013
For some reason I'm getting color shift between the Library and Develop Modules.
View 7 Replies
View Related
Nov 11, 2012
I can see a previously processed image in the Library module. When I try to open that image in Develop, it changes to another image in the same folder. This only happens with certain images.
View 7 Replies
View Related
Feb 11, 2014
The main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies
View Related
Jun 29, 2013
I can't process any images as the basic tab has suddenly vanished.how can I get it back?
View 3 Replies
View Related
Mar 1, 2013
I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite. I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW. At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR. I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
View 3 Replies
View Related
Dec 8, 2011
When I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies
View Related
Jan 26, 2013
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies
View Related
May 19, 2013
My setup is a ATI FirePro v4900 connected to two monitors: an Eizo CG276 and an old second monitor. I would like to get the Eizo to display 10-bit colors in PS CS6 under a 64-bit Windows 7.
After setting everything up, I am at a point where Lightroom 4.4 displays the notorious ramp.psd file (see below) without banding in the develop module, hence I assume 10-bit is working there. In Photoshop, however, I had no success so far to get 10-bit to work.
Here's what I've done so far:
I set everything up as described here [URL] ...........
Summed up, I did:
1) enable 10-bit mode in ATI driver and rebooted -> checked and this is still enabled after reboot
2) open PS CS6 and enable "advanced" drawing mode and 30-bit display in the "performance" options and rebooted -> checked and this is still enabled after reboot
I verified that the monitor runs in 10-bit mode using Monitor Asset Manager 2.6 [URL]. It states that Color bit depth is "10 bits per primary color", which is what I want.
Then I tried to open the ATI 10-bit test file ramp.psd [URL]. In Photoshop it shows banding. As I've read that Lightroom 4's develop module uses 10-bit, I opened the file there and it had no banding.
The only troubleshooting I could find for 10-bit colors in PS was this post [URL] ... however I do not have desaturation set in the color preferences of PS, hence it does not apply to my problem.
View 1 Replies
View Related
Aug 8, 2012
When I open Lightroom the develope module does not appear with the other modules in the upper right hand corner. How do I corret this?
View 2 Replies
View Related
Oct 7, 2013
I am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
View 1 Replies
View Related
Dec 8, 2012
I can't access the "Hue" tab in develop module. I can only access Hue by selecting "All."
View 2 Replies
View Related
Feb 28, 2014
My develop module is not fully opening. The only items it is allowing me to edit is lens profile correction, vignetting. How to restore the full develop module starting with temperature, contrast, blacks, whites, shadows, etc., all the way down the whole module.
View 1 Replies
View Related
