When I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 RepliesFor some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedSharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies View RelatedI'm evaluating Lightroom 5 during the 30 day trial and it's all cool except for this one big annoyance that I noticed immediately when trying to work on an image in Develop module. As stated in the title, moving any slider (exposure, highlights, noise reduction, etc.) causes the image to go very blurry for the duration of the slider movement. It goes immediately back to being sharp as soon as I stop moving the slider. This is super annoying, feels as though my eyes are going bad.
What's interesting is that the problem doesn't show up when I'm adjusting the Tone Curve directly, but it will get triggered if I'll expand and use the sliders underneath. So looks like a bug that only applies to sliders.
This doesn't happen at all in Lightroom 4.4, which I still have installed and can compare side-by-side.
As for the hardware, I'm using the 2013 Macbook Air with 1.3 GHz i5 CPU and 8 GB of RAM. The OS X version is 10.8.4 with all latest upgrades installed.
I've already tried optimizing the catalog, giving it more space (currently at 3 GB) and purging it. I'm not using Smart Previews, although I've turned them on for a moment to see if the problem persists with them on - it does. I've also re-rendered the 1:1 preview for the specific image I've been trying it on. Btw, the file is a NEF from Nikon D300 and I'm using the 2012 process (as was the case with LR4). Not sure what else might be relevant here.
I get red and blue splotches on photos in LR5 Develop Module. Seems to be mainly in bright areas of photos. Not there in Library module. I noticed this in the Beta as well but thought it would be fixed before release. In LR4.4 everything is fine.
View 2 Replies View RelatedWhen i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 Replies View RelatedI am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
I have important some photos into the library catalog, but they are not showing up in the filmstrip or develop module, even when I click to select one. I can work on it in the library section, but not the develop section. What do I have to do to make it appear in 'develop'?
View 2 Replies View Relatedwhen I take my photos into the 'Develop' area, they become covered with red dots like bacteria.
View 4 Replies View Related I managed to get my catalog transferred from Elements 8 and it is now working well. Feeling confident in the Library module I went to move on to the Develop module and now I have another problem, the photos are not showing up to edit. They are visible in the film strip and the top left corner, but not the actual screen. All the metadata is also available.
Possibly a related problem (which may also need a resolution) is:While all the data is there in Library module it is showing metadata conflict for many photos.
BTW some additional information which may be relevant.
-I have already upgraded to 4.1.
-I have the photos on a network drive.
-Photos are Raw DNG format
The main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies View RelatedI can't process any images as the basic tab has suddenly vanished.how can I get it back?
View 3 Replies View RelatedWhen I open Lightroom the develope module does not appear with the other modules in the upper right hand corner. How do I corret this?
View 2 Replies View RelatedI am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
View 1 Replies View RelatedI can't access the "Hue" tab in develop module. I can only access Hue by selecting "All."
View 2 Replies View RelatedMy develop module is not fully opening. The only items it is allowing me to edit is lens profile correction, vignetting. How to restore the full develop module starting with temperature, contrast, blacks, whites, shadows, etc., all the way down the whole module.
View 1 Replies View RelatedMy LR 5 is developing with LR4 processing. How do I upgrade so I am developing with LR 5 develop tools?
View 4 Replies View RelatedThe new LR4 develop module looks exactly like the LR3 . The quick what's NEW video shows a highlight and shadow slider and the exposure and contrast sliders are in different places.
View 3 Replies View RelatedI don't see the RGB in curves in the develop module and it still shows brightness. In fact it looks just like LR3? Just downloaded upgrade. What's going on?
View 9 Replies View RelatedWhy my develop module is not highlighted?
View 12 Replies View RelatedDid I lose my adjustments in Develop when I clicked on Library in Lightroom? I have been working on a group of about 300 photos for the past several days. Today I was in Develop and went to Library to get a couple of new photos. When I got back to Develop all my adjustments were gone. Can I get them back?
View 3 Replies View RelatedI want to take advantage of a FULL SCREEN to see my images.However, the panel with all the controls takes up about 1/6 of the real estate.I know the panel can be auto hidden, but I hate that workflow.
I would love to put the panel on a separate monitor leaving just the image full screen on the other.
I'm using the last version of Lightroom (3.6 if I'm not wrong) and I'm facing a very uncomfortable issue with the Develop module.
I adjusted precisely every color luminance and saturation so it looks rather good in the Develop preview (set to fit), and did an export...
The preview I worked on and the export simply don't look the same.
I work with NEF files from my NIKON D3100 DSLR on a Mac OSX 10.7 MBP.This cannot be the external display profile not correctly adjusted since I viewed every pictures on the same screen.I unchecked every boxes from the presets tab in the settings window.
Here are some screenshots and exports.
Fit preview in the Develop module (left) and the actual export of the same picture (right).I didn't activated any lens correction option and adjusted any color. This is the RAW file and its direct export.Screenshot of the preview window on top of noise correction options (left) and the same area once I zoomed in in the main preview (right)
A couple of days before today I was using Camera RAW from PS CS5 to correct my NEF and was only keeping exports in JPEG. I decided to use LR 3 on my entire workflow and I'm being skeptical...
EDIT : i can join any required file or screenshot if required. I have some other shots having tthe same issue (a lot of ones indeed...)
EDIT 2 : i just found out the picture has much more acurate colors (relatively to the export ones) in the Library module in fit preview (Loupe I guess)
I have Lightroom 3.5 - Photoshop CS5 Extended and both are up to date but I'm trying to get my ALR to use the latest Camera Raw 6.5 but it's not a selection on the drop down menu.
My camera profiles are there for Nikon D700 but i'm using presets that use ACR and it's old. -- i've removed Lightroom (an unistaller would be super useful adobe!!!) but it still remembers my old catalogs etc...
I have been using 3.6 from day one with no problems, now I can view all files in my catalog, but when I go to the develop module the picture does not show and LR freezes. I have tried everything to no avail.
View 1 Replies View RelatedI recently updated Lighroom 4.1 to 4.2 successfuly, but now any time I go into the Develop module, Lightroom pauses, then crashes and forces me to quite the program. Is this a bug than needs to be ironed out, or is there something else going on?
View 1 Replies View RelatedI am running Lightroom 4.1 RC on a 2010 iMac 27" with 2.93 core i7, 16GB of RAM and a 512GB Crucial M4 SSD drive (where the Lightroom catalog resides). When I scroll through images in Library, I can move through images very fast, however, when I try to do the same in the Develop module, it becomes really, really sluggish. Probably about 5 seconds between images. I have 1:1 previews generated.
View 3 Replies View RelatedI have installed lightroom 4.3 on my Dell inspiron 1525 running Windows Vista Home Premium with SP2. The moment I try to get to Develop module, Lightroom displays message in a window as "Adobe Photoshop Lightroom has stopped working" and displays the options to check online for a solution or close the program. Is it the operating system or the buggy lightroom ? I did try 4.2 as well with no successful results.
View 11 Replies View RelatedI can't turn off the develop module tip window in lightroom 4 with out closing down LM. I have tryed (commond /) and just get another window to pop-up.
View 1 Replies View RelatedI am using LR5 and my Quick Develop Module is missing. My photos are online and so this is not the problem. I rebooted but still no Quick Develop Module. I can use the other modules.
View 3 Replies View Related