After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 RepliesFor some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedSharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 Replies View RelatedI am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?
View 1 Replies View RelatedI was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
Why this wasn't changed?
I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
Using Lightroom 4.1 final, I see greatly different color saturation between the Library (very saturated) and the Develop (seems OK) module if I start the program on my sRGB monitor and drag the window to the wide gamut screen.
It seems like the Library preview is rendered as if the monitor was sRGB.
This seems very similar to the problem that was fixed from 4.1 RC2 to 4.1 final, but more specific to particular circumstances. And the problem does not exist if LR starts on the wide gamut monitor.
I'm using LR 4.1 final 64 bit on Windows 7 64 bit and I always use LR with a single window despite having two monitors.
The image does not come up when i switch from the library to develop module.
View 1 Replies View RelatedThe curved, block like, lines in the upper left of this photo appears in the Library module and after I export. When I am in the Develop module, the lines are not there. What is causing these lines, and how can I make it stop.
View 3 Replies View RelatedI've been using my LR3 for a few months but this is the first time that I got an error message when I was switching from the Library module to the the Develop module. I have a macbook pro with 500 GB HD. I am currently using 450 GB already.
View 1 Replies View RelatedWhen I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies View RelatedI've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
View 9 Replies View RelatedI'm using the last version of Lightroom (3.6 if I'm not wrong) and I'm facing a very uncomfortable issue with the Develop module.
I adjusted precisely every color luminance and saturation so it looks rather good in the Develop preview (set to fit), and did an export...
The preview I worked on and the export simply don't look the same.
I work with NEF files from my NIKON D3100 DSLR on a Mac OSX 10.7 MBP.This cannot be the external display profile not correctly adjusted since I viewed every pictures on the same screen.I unchecked every boxes from the presets tab in the settings window.
Here are some screenshots and exports.
Fit preview in the Develop module (left) and the actual export of the same picture (right).I didn't activated any lens correction option and adjusted any color. This is the RAW file and its direct export.Screenshot of the preview window on top of noise correction options (left) and the same area once I zoomed in in the main preview (right)
A couple of days before today I was using Camera RAW from PS CS5 to correct my NEF and was only keeping exports in JPEG. I decided to use LR 3 on my entire workflow and I'm being skeptical...
EDIT : i can join any required file or screenshot if required. I have some other shots having tthe same issue (a lot of ones indeed...)
EDIT 2 : i just found out the picture has much more acurate colors (relatively to the export ones) in the Library module in fit preview (Loupe I guess)
Is there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies View RelatedI am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies View RelatedI have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
View 14 Replies View RelatedI'm running LR4.1 on Macbook Pro OS X 10.6.8, monitor is calibrated with Spyder3Elite.
I was working on a photo in LR4 and I made adjustments in Develop module until it looks good to me. I exported the RAW file to JPEG with sRGB color profile and applied Standard Sharpening for screen. Here's how it looks:
Left side is LR4 Develop module, Right side is Mac Preview, Soft proofed to my monitor color profile.
I have no problem with the color on both applications and I have given up on the amount of noise that is significantly magnified (even exporting without sharpening gives so much more noise than Develop module displays... ) but look at those stars!!
How come the export shows SO many stars while LR4 Develop module sorta "hides" them? The look on Library module is closer to the exports when it comes to the stars only, but the absence of NR makes it way too horrible to look at longer than a second
Under the Develop Module is it possible to export the changes made to an image recorded under the History Tab?
View 1 Replies View RelatedI can see a previously processed image in the Library module. When I try to open that image in Develop, it changes to another image in the same folder. This only happens with certain images.
View 7 Replies View RelatedThe main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies View RelatedI can't process any images as the basic tab has suddenly vanished.how can I get it back?
View 3 Replies View RelatedWhen I open Lightroom the develope module does not appear with the other modules in the upper right hand corner. How do I corret this?
View 2 Replies View RelatedI am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
View 1 Replies View RelatedI can't access the "Hue" tab in develop module. I can only access Hue by selecting "All."
View 2 Replies View RelatedMy develop module is not fully opening. The only items it is allowing me to edit is lens profile correction, vignetting. How to restore the full develop module starting with temperature, contrast, blacks, whites, shadows, etc., all the way down the whole module.
View 1 Replies View RelatedMy LR 5 is developing with LR4 processing. How do I upgrade so I am developing with LR 5 develop tools?
View 4 Replies View RelatedThe new LR4 develop module looks exactly like the LR3 . The quick what's NEW video shows a highlight and shadow slider and the exposure and contrast sliders are in different places.
View 3 Replies View RelatedI don't see the RGB in curves in the develop module and it still shows brightness. In fact it looks just like LR3? Just downloaded upgrade. What's going on?
View 9 Replies View RelatedWhy my develop module is not highlighted?
View 12 Replies View Related