Lightroom :: Colour Shift Between Develop Module And Library
Jan 25, 2012
I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?
For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
Sharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
LR 4.1 RC2, OSX 10.6.8 - when I'm trying to use the develop module with my second monitor, the image initially looks accurate. After a second or two and before any edits have been applied, the images desaturate and look very flat. Images viewed with the second monitor in Library module look great.
When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
I am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
I was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
Using Lightroom 4.1 final, I see greatly different color saturation between the Library (very saturated) and the Develop (seems OK) module if I start the program on my sRGB monitor and drag the window to the wide gamut screen. It seems like the Library preview is rendered as if the monitor was sRGB.
This seems very similar to the problem that was fixed from 4.1 RC2 to 4.1 final, but more specific to particular circumstances. And the problem does not exist if LR starts on the wide gamut monitor.
I'm using LR 4.1 final 64 bit on Windows 7 64 bit and I always use LR with a single window despite having two monitors.
The curved, block like, lines in the upper left of this photo appears in the Library module and after I export. When I am in the Develop module, the lines are not there. What is causing these lines, and how can I make it stop.
I've been using my LR3 for a few months but this is the first time that I got an error message when I was switching from the Library module to the the Develop module. I have a macbook pro with 500 GB HD. I am currently using 450 GB already.
I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite. I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW. At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR. I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all? 2. Can I prevent LR from applying the Adobe Standard Style and apply no style? 3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
I've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
Is there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
I have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
I can see a previously processed image in the Library module. When I try to open that image in Develop, it changes to another image in the same folder. This only happens with certain images.
The main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
When I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
I've got strange subtle color shift from reds to yellows when I'm doing the following:
1) import my raw files as DNG into LR
2) edit them in LR
3) ctrl-E them to edit in PS
4) edit them in PS (just drawing a dot with the brush tool somewhere, so the file could be saved and re-imported to LR)
5) save (not "save as") them in PS which bring them back as tifs to LR
This final tif from PS has some color shift in comparison to the original DNG file. Nothing is edited in PS.
Furthermore:
- if I'll open to edit the resulted tif with the color shift in PS once again with the option to use LR adjustments, I'm getting color shift in PS
- if I'll open to edit the resulted tif with the color shift in PS once again with the option to open the original tif without LR adjustments, I'm getting correct color in PS, as in my original DNG
I am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
My develop module is not fully opening. The only items it is allowing me to edit is lens profile correction, vignetting. How to restore the full develop module starting with temperature, contrast, blacks, whites, shadows, etc., all the way down the whole module.
The new LR4 develop module looks exactly like the LR3 . The quick what's NEW video shows a highlight and shadow slider and the exposure and contrast sliders are in different places.
I don't see the RGB in curves in the develop module and it still shows brightness. In fact it looks just like LR3? Just downloaded upgrade. What's going on?
