I can see a previously processed image in the Library module. When I try to open that image in Develop, it changes to another image in the same folder. This only happens with certain images.
View 7 RepliesThe image does not come up when i switch from the library to develop module.
View 1 Replies View RelatedMy edit image in the Library is not the same as the image in Develop.. How do I get them to be the same image? I want the image in Develop.
View 1 Replies View RelatedFor some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedSharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies View RelatedWhile editing a TIFF file in the Develop module, the image keeps reloading (image flashes off and on), and the adjustment sliders revert to neutral settings. Makes any editing very diffficult! Windows 7 64-bit 8 GB Ram.
View 1 Replies View RelatedI shoot in RAW. I import an image into lightroom 4.4. I select the image in the Develop module. The image loads very nicely, but within one second of the image opening on my screen, it becomes much softer and slightly lighter. It does it with every new image.
View 2 Replies View RelatedI have a macbook pro with retina display, in my lightroom 4.1 the images in the library look normal but when i go to develop module the image is blurred and very low quality. In settings the rendering are high quality 2048 1:1
Any way to fix this? Also in my external monitor i notice this thing with minor loss.
I had Lightroom 3. I just got a new computer and installed LR 4.. In the Library module, everything looks fine. When I switch to the Develop module, I can't see the image--just a gray rectangle. The Develop module works, as any adjustments I make are visible when I return to Library, but I can't see what I'm doing.
I'm using Windows 7 Ultimate, 8 GB memory, 64-bit, 970 GB free out of 1.8 TB, and working on RAW images.
Troubleshooting checklist:
1. When you go to Develop, do you see a blank filmstrip?" No. The photos appear in the filmstrip.
2. Does the problem happen regardless of which folder or collection you have selected in Library?" Yes.
3. If you import a new set of photos (that weren't in the original LR3 catalog), does the problem happen with those?" Yes. 4. Do you use stacks in library?" No.
5. If you export a portion of the catalog (a collection or folder, perhaps), then open the exported catalog, does the problem still happen?"
When I export an image from the Develop Module, I'm having a problem with it being 1.5 to 2 stops darker than the original.
View 10 Replies View RelatedI recently upgraded to LR5 from LR4.1. I have seen on several occasions where the selected image in the Develop Module does not appear. I can move back to the LIbrary view and the image appears, but when I switch back to the Develop Module, the image disappears and only a black box appears (dark grey really). This seems to happen after I have deleted flagged files using the ALT-Backspace shortcut. This has happeded when I deleted while in the Library and Develop Module, but does not happen every time. I have disabled the "Show photo on Mouse Over" view option. Prior to that, the preview window shows the selected or moused over photo.
The only thing I can do to get the develop module to work again is to restart Lightroom. It is very annoying when trying to go through 4000 photos!
I need to know how to do the above procedure in lr5 as when i did the processing of one image i saw no tab to click to save the image or move the image or clicking done?
View 4 Replies View RelatedI have several raw images that were imported directly from the memory card into LR5 as DNG files. They look fine in the Library mode - both in Grid and Loupe view, but when they are opened into the Develop module they have gray and pink boxes as if information is missing and I get an error message saying "image appears to be damaged".
Is it really damaged or is there a way to resolve this? When I look at the file itself through Finder it shows the damage, so I'm thinking it's damaged but somehow the previews aren't?
Just want to understand before I import again or start editing only to lose more pictures. Is it a bug?
We recently installed extra RAM only to find out it wasn't compatible with the Mac. We have the correct RAM in there now, but I don't know if I should uninstall and reinstall LR5 or if it should now be fine with the new RAM or if it's totally unrelated to the RAM.
In Lightroom 5 and 5.2, when using the X key, then Delete Rejected Photos, the central display box no longer displays an image. If I switch back to Library mode an image will appear but if I go back to the Develop module, again it's a blank screen! If not, how do I report this directly to Adobe?
View 12 Replies View RelatedI'm a light room noobie (as in I downloaded it 2 days ago). I'm loving the experience so far, however, I have a quick question, I have edited a few photos I took at a gig, I've developed them, however, when I look at them in Library, there is a loss of sharpness in some, in others where I've reduced noise in Develop, there is still noise when viewed in Library.
View 8 Replies View RelatedUnder the Develop Module is it possible to export the changes made to an image recorded under the History Tab?
View 1 Replies View RelatedI'm evaluating Lightroom 5 during the 30 day trial and it's all cool except for this one big annoyance that I noticed immediately when trying to work on an image in Develop module. As stated in the title, moving any slider (exposure, highlights, noise reduction, etc.) causes the image to go very blurry for the duration of the slider movement. It goes immediately back to being sharp as soon as I stop moving the slider. This is super annoying, feels as though my eyes are going bad.
What's interesting is that the problem doesn't show up when I'm adjusting the Tone Curve directly, but it will get triggered if I'll expand and use the sliders underneath. So looks like a bug that only applies to sliders.
This doesn't happen at all in Lightroom 4.4, which I still have installed and can compare side-by-side.
As for the hardware, I'm using the 2013 Macbook Air with 1.3 GHz i5 CPU and 8 GB of RAM. The OS X version is 10.8.4 with all latest upgrades installed.
I've already tried optimizing the catalog, giving it more space (currently at 3 GB) and purging it. I'm not using Smart Previews, although I've turned them on for a moment to see if the problem persists with them on - it does. I've also re-rendered the 1:1 preview for the specific image I've been trying it on. Btw, the file is a NEF from Nikon D300 and I'm using the 2012 process (as was the case with LR4). Not sure what else might be relevant here.
When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 Replies View RelatedI am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
I happened upon a rather odd glitch whilst using LR5 this evening, possibly related to the bug that's been discussed on here where images selected in grid view in a publish collection don't correspond to the selections indicated in the film-strip. However, it's not quite the same thing...
I noticed that the display under the histogram had a rectangle with a '2' next to it. I had no idea what that represented (just getting used to some of the LR5 changes) and had to consult the PDF to find out. It in fact indicated that I apparently had two images currently selected, both of which were original images with no smart-previews. Fair enough (not using smart-previews), expect that I only had one image selected, not two. I repeatedly tried deselecting all images (ctrl-d), but as soon as I re-selected one image, the '2' symbol re-appeared. Switching modules/view/moving between various collections and 'all photographs' failed ot prevent this - it was stuck on telling me I had two images selected no matter what.
I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?
View 1 Replies View RelatedI was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
Why this wasn't changed?
I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
Using Lightroom 4.1 final, I see greatly different color saturation between the Library (very saturated) and the Develop (seems OK) module if I start the program on my sRGB monitor and drag the window to the wide gamut screen.
It seems like the Library preview is rendered as if the monitor was sRGB.
This seems very similar to the problem that was fixed from 4.1 RC2 to 4.1 final, but more specific to particular circumstances. And the problem does not exist if LR starts on the wide gamut monitor.
I'm using LR 4.1 final 64 bit on Windows 7 64 bit and I always use LR with a single window despite having two monitors.
I've noticed in the past couple of days that I will be refining an image in the develop module, feel I've gotten it the way I want it to look, and then switch back to the library module to export. When I do so, I notice the colors are quite different than they were just a second ago in the develop module. When I switch back to the develop module, it goes back to the way it looked in the develop module. How might I fix this?
View 4 Replies View RelatedThe curved, block like, lines in the upper left of this photo appears in the Library module and after I export. When I am in the Develop module, the lines are not there. What is causing these lines, and how can I make it stop.
View 3 Replies View RelatedI've been using my LR3 for a few months but this is the first time that I got an error message when I was switching from the Library module to the the Develop module. I have a macbook pro with 500 GB HD. I am currently using 450 GB already.
View 1 Replies View RelatedI was wondering if it was possible to set a setting in Lightroom such that when looking through my images in the Library module, I only see the final edited image. For example, if I send the image to Photoshop to do any retouches, it creates a copy of the file. When I save the file in Photoshop, I then have two images in the Library module. However, I would like to keep all the history, but when browsing through my images I would only like to see the final image.
View 1 Replies View RelatedI've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
View 9 Replies View RelatedIs there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies View Related